Add reg_is_chan_disabled that is used to check if channel
is disabled or not in given channel list.
Rename the API to reg_is_chan_disabled_and_not_nol.
Change-Id: I2b05b0cea0472fc924634ae921e77842f0608a11
Add the 6G config flag so that super channel list functions are not
compiled on devices that do not support 6G.
Change-Id: I95a13c6cc8dd6ee36aed5fdb1df4555a08adc058
CRs-fixed: 3118310
HAL changes to populate agc gain, CFO, rx_start_ts, mcs_rate and
gi_type to CFR info for QCA6750.
Change-Id: I164324b1e929399a8dacf88f3012970c65d5d653
CRs-Fixed: 3115256
Fix compilation error when monitor mode files are not present
and QCA_MONITOR_2_0_SUPPORT is disabled.
Change-Id: Ia70976a89c0ca2349cf744c23a68b3004cbd3325
CRs-Fixed: 3117582
For per-session detector map, maintain a different
det_map_valid flag for Normal and Agile spectral scan
mode.
Change-Id: I5a2a0253624a393feba966641d518e59a48f4a8a
On some targets, minidump will be built as DLKM, and use IS_ENABLED
macro to cover both built-in and DLKM scenario.
Change-Id: I93374b83020af7122531fe282042236cae8037b3
CRs-Fixed: 3116787
Add an API wlan_reg_get_superchan_entry to get a super channel list
entry for a given input channel index.
Change-Id: Ia231669872c15998549aff6262d66766b8cec5c2
CRs-Fixed: 3098998
Add an API reg_translate_6g_chan_enum to translate an index between
MIN_6GHZ_CHANNEL and MAX_6GHZ_CHANNEL, to an index between 0 and
NUM_6GHZ_CHANNELS.
Change-Id: I5eaacf36403252a56293b8fadc797ac2aacd751d
CRs-Fixed: 3099080
Since there are multiple power modes in 6G, the current channel list
alone is not enough to represent the capability of the chip or
device. Given a channel, in many cases it may be required to know all
the power modes that are supported by this channel.
To represent this information per channel, the concept of a super
channel list is introduced. This super channel list is essentially a
mapping between a channel and supported power modes, and
their associated attributes, such as power values, Indoor/Outdoor etc.
The 6G super channel list is stored in the regulatory pdev private
object.
Change-Id: I8657fed17823929c87110aa7a6cf24fe898bb78f
CRs-Fixed: 3098998
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
Current there is no ce debug history when testing
perf build, so it is hard to debug some issue.
Here it only enable ce2/ce3 on perf build, which keep
only necessary log here.
Change-Id: I29b998939cfa25f0547a9871721c6daeb0fdd961
CRs-Fixed: 3058740
Register a callback to get max supported FW phymode for the given
channel list.
Also, corrected the array index value used to populate the DFS flag and
phymode.
Change-Id: Id635a159acac085827831726d3020cc209b810cf
CRs-Fixed: 3083405
In the 5.4 kernel, a kernel timer expiry is delayed at the rate of 1 sec
per minute (approx). This accrues to 30 seconds for NOL which is a
30 minutes timer
To avoid the delay use HR(High Resolution: "hrtimer_start") timer for NOL
Change-Id: Ia1072532120d909bbbb73d6acb74643956a66900
CRs-Fixed: 3043864
Send only eapol packets to stack and drop other packets
when found in rx err path when either REO or RXDMA push
reason is set to ROUTE type.
Change-Id: If1f43426adf21f7d00f17d369cd7fde7f7f85866
CRs-Fixed: 3114312
Add qdf wrapper for dma_clean_range and avoid use of DMA
map/unmap APIs in Tx. simple fast path.
Gain of ~150 Mbps is observed while running 4 radio traffic.
Change-Id: I0e96bfee43fe810da8c861cb0f4535fb0ba7f6f7
The channel finding APIs invokes regulatory API reg_fill_channel_list
to fetch the channel params for a given freq. However,
reg_fill_channel_list considers NOL channels as disabled
Hence if the input freq is in NOL, channel finding fails.
Hence in reg_fill_pre320mhz_channel(),
(a) : For MCC, invoke reg_set_channel_params_for_freq()
which considers NOL channels as disabled.
(b) : For WIN, invoke wlan_reg_get_channel_params()
which considers NOL channels as enabled.
Change-Id: Ib184aee665525a9eff57d0d9214925a919e5269f
CRs-Fixed: 3089609
1. avoid accessing CFG parameter in per pkt path.
2. Access peer, vdev and pdev only when current peer_id
is different from previous peer_id.
3. Avoid HKv1 and v2 checks in WDS learning path.
Change-Id: Id7fb7a29c642480f8ca58738dbb0c92130e44ecd
Add max MLO (WLAN_UMAC_MLO_MAX_VDEVS) and MLD max WLAN_UMAC_MLO_MAX_DEV
in #ifndef block so that this can be overridden by cflags.
Change-Id: Iaa2dd1a8d6759b9f9e79bc076e8a4e4673921be8
CRs-Fixed: 3115703
Currently unsafe channel list updated from firmware using
"wmi_wlan_freq_avoid_event_id".
This change is to update unsafe channel list for vendor
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT which we receive from
userspace.
Change-Id: I57ff334e9cf47468c30bc6884a9ead0a65a92eab
CRs-Fixed: 3103275
DMA unmap for scatter gather packets is done using
only frag0 dma address and the entire packet length
which will lead to incorrect behaviors. Add handling
to do dma unmap for all the fragments of SG packets.
Change-Id: I614553d9f96c573f0095c9be38706fd4ac3223ab
CRs-Fixed: 3112424
Add a log message to indicate RTPM resume is requested by RTPM
prevent runtime suspend API.
Change-Id: Ifb90493d1ea48601bb40708b1a2d7a821144a9b2
CRs-Fixed: 3110580
Num stats over QMI indicates how many stats requests are fetched
without triggering RTPM resume. If RTPM resume/suspend happens in
the middle then num stats over QMI counter should reset. Add logic
to reset num stats over QMI counter during WoW enter/exit.
Change-Id: I34fe93759bf8a7a2a6c0d4b389ad96b8e1ba4d6c
CRs-Fixed: 3110590
Tx descriptor is not being freed and put back in tx desc
pool for a long time. As a result, system is not going
into suspended state.
To find this descriptor, during dp_bus_suspend and
dp_runtime_suspend, parse through the descriptor pool to
check for any descriptors not freed for a long and trigger
self recovery when found.
Change-Id: Id97c5c8537c9bec922f4e254b5bf094505ee61ff
CRs-Fixed: 3109868
The compiler removes unreferenced TCL_DATA_CMD struct from the
object file. Hence this cannot be parsed in the dumps. This fix will
inform the compiler to retain the structure.
Change-Id: I6bc12893769f17dc3f51130b7e947f62b1bd3ea9
CRs-Fixed: 3105021
Add API qdf_time_ms_to_ktime which is an abstraction of ms_to_ktime
to the qdf layer.
Change-Id: Ie6510007b61bc3b3ac28648983b30a3c52e97098
CRs-Fixed: 3043864
Firmware advertises the service capability bit
WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL when it supports per
channel scan config flags. Get this and cache in psoc.
If firmware supports WMI_SERVICE_PNO_SCAN_CONFIG_PER_CHANNEL,
it uses the upper-12 bits(bit-20 to bit 32) of channel_list
for flags and lower 20-bits(bit-0 to bit-19) for frequency.
If firmware doesn't support it, then channel_list holds the
frequency value only. Fill the flags and frequency accordingly.
Change-Id: I30d36a3c164e23cf0395129e5b93d186b81aa8a6
Crs-Fixed: 3103921
