WLAN Latency module (WLM) is added by fw to gain latency
because of schedule out of service like power saving,
scanning, roaming etc. per the level set by framework.
Change-Id: I6b8775e5f492b6f287d60d39610a544114185a23
CRs-Fixed: 2152290
To be able update the target with user preferred HE beamforming
capablities we need corresponding commands exposed to the user
space. Add HE beamforming capabilty mask in order to set or get
these capabitlites in the destination variable to enable these
commands.
Change-Id: I0f7f86fa53a3f6629299808042d05e78ecc489bd
CRs-fixed: 2126717
CCE param disable is required for RAW Mode AMSDU cases,
RAW AMSDU frames causes CCE to crash, to avoid crash
disable cce component using CCE param.
Change-Id: I1b221e12ac69a873e995485c56a6ea5b310e727c
CRs-Fixed: 2132295
Add status recieved as part if WMI ready event into wmi_ready host param
structure to enable the removal of seperate API to extract status. Add
new param introduced by FW to indicate number of extra peers FW is
allocated for its internal use.
Change-Id: I7a9ed64d4a9d1f38397197c4c4a4114d8365eef7
CRs-Fixed: 2149878
Add offchan_data_tx_support service enum to map to new service bit for
this support.
Change-Id: I772d1d43e507469efc678f791ce92ef26eb844a5
CRs-Fixed: 2145450
Request and print WDS table from FW using WMI command and event.
WMI_PDEV_WDS_ENTRY_LIST_CMDID is used to request WDS table
entries and WMI_PDEV_WDS_ENTRY_LIST_EVENTID is used to process
received WDS entries.
Change-Id: I452c8067d191d09826a38b751bb66f1bde587d9b
CRs-Fixed: 2003377
Request and process Beacon frames from FW using WMI command and event.
WMI_HOST_REQUEST_BCN_STAT is for beacon stats request and event processing.
Change-Id: I99250384868d62089a0f7d2acf94dd6e29ef67b9
CRs-Fixed: 2139393
Beacon offload control WMI command is used to control beacon tx in
beacon offload enabled mode. Add WMI API to send this command to FW.
Change-Id: I8b340b69ff508aaf80b9a80de044b0189b947a66
CRs-Fixed: 2140255
WMI ready event provides num_dscp_tid, num_total_peers and other
information that is used. Add API to extract these params.
Change-Id: I85ffc43f20935d84de133591020468c5e5f102de
CRs-Fixed: 2141667
Add support for configuring aggregate size for A-MSDU and A-MPDU
aggregations.
Add support for rate dropdown vdev param to dropdown rates for SU, MU
and MGMT packets.
Change-Id: I033693e1c21c05d06acd7df36eac580be19fe20b
CRs-Fixed: 2138655
Acked-by: Aditya Sathish <asathish@qti.qualcomm.com>
Firmware sends beacon/probe response, reassoc request and
reassoc response using new event WMI_ROAM_SYNCH_FRAME_EVENTID
when the data that it wants to send via WMI_ROAM_SYNCH_EVENTID
exceeds max length 2k in firmware. Add common changes to handle
WMI_ROAM_SYNCH_FRAME_EVENTID in such a scenario.
Change-Id: I62755dfa3c2a4b0ff9ee48fd5f24cc2e300b374f
CRs-Fixed: 2122432
Add new pdev param with which firmware can be set to use
a lower number of chains without doing a reset. In response
to this firmware's ratecontrol will select only rates
which can be sent using a lower number of chains, and set
the h/w tx descpriptor's chain select to whatever value
has been configured using this command.
CRs-Fixed: 2123206
Change-Id: Ice713393958c2c2acedba0fe2e9354f3fe3bee75
Currently, WMI is exposing two command ops
(send_init_cmd and init_send_cmd) for init
command purpose which is leading to data/code
redundeancy. Perform clenaup for send_init_cmd.
Change-Id: I8f31ab45392cf2afb3cc34c633ba83ea42a3a835
CRs-Fixed: 2138507
Add WMI vdev param to indicate firmware not to buffer mcast frames
even when clients are in power-save.
CRs-Fixed: 2133095
Change-Id: I4fe936e6a490ec8007f909e1ba079bec2f2713cd
Add support for sending periodic chan stats config command to target. Once
configured, host will receive the channel stats periodically as per the
configured period
Change-Id: Ic2b4692d0e2662ca590b925732f6cb33aac7a6de
CRs-Fixed: 2136759
RCPI is measure of received RF power in the selected channel for a
received frame and is measured at the antenna connector and shall be
measured over an entire frame. It is a monotonically increasing,
logarithmic function of received power level.
Wlan firmware computes RCPI.
Add host support to query firmware for RCPI information of
peer mac address in sta, p2p client, softap and p2p go modes.
Change-Id: I27fe45e993bd9b157fe33ca08a56330c1c950d16
CRs-Fixed: 1093187
It is required to send vdev-param HEOP to the target with
updated bss-color to enable HE BSS Color feature. Add
necessary code to support this.
Change-Id: I826bc5387dad8d044abcbc9cbdf69e93b59beb39
CRs-fixed: 2126605
Currently there is no support for management MGMT TXRX
component over HTT endpoint and supports only over WMI.
As a result for platforms which does not support MGMT
over WMI will break other components which uses MGMT TXRX
component to send mgmt packets.
In this change implement changes to support MGMT TXRX
component over HTT.
Change-Id: I487aca3893aa21905a744e2e5dc7104e6c414fdc
CRs-Fixed: 2097694
Both the unified DHCP offload struct dhcp_offload_info_params and all
of the function prototypes use "camelCase" which is frowned upon by
the Linux Coding Style. Replace the camelCase.
Change-Id: I3f2ce74bc150668b96b1946ef7b2d556c23dad94
CRs-Fixed: 2121485
Add cmn support for the following:
- Update ERP info in RSO Start
- Update HLP info in a new command WMI_PDEV_UPDATE_FILS_HLP_PKT_CMDID
- Set/Delete PMK cache info with WMI_PDEV_UPDATE_PMK_CACHE_CMDID
- Process FILS TLV in Roam Synch Indication and update the FILS info
[seq number,PMK, KEK, realm] to Supplicant.
Change-Id: I239bf5d6c4455d39181e335dbf73bcade16aee8e
CRs-Fixed: 2089128
Add support to send BSS scoring params from INI to firmware.
Firmware will use these params to select best candidate during
roaming.
Change-Id: Iad0e71c770ac4f4c31ce3b19552f09fd27dc37bf
CRs-Fixed: 2121739
Currently, we do not have support for 'he_ltf' command. But we need
this command for certain IOP testcases. Add support for 'he_ltf'
command.
Change-Id: I296b18762aaa52da80a5755c5bcca8dbd12d9b13
CRs-fixed: 2118948
Initialize pdev_id for PDEV stats request and response event.
Add param to set pdev stats request timer.
Change-Id: I11f648070cd39f026129d1cf3aa13bf296d25e6e
Add functions to send bridge MAC programmed from user
space to firmware.This change is part of a workaround
to fix an looping issue which resulted in wrongly adding
bridge's own MAC address to fw WDS table.Send MAC address
to target to avoid adding our own bridge address to fw
WDS table as part of source port learning.
Change-Id: I815d3c3f106cd2f528ac9172712ec6c2f47f4410
CRs-Fixed: 2070956
During host invoked roaming, set
WMI_ROAM_INVOKE_FLAG_NO_NULL_FRAME_TO_AP
flag so that FW will not send NULL data frame while doing transition.
CRs-Fixed: 2046964
Change-Id: I043c3d2431e4da5af36fb710bd36a520550abbd3
Extended service bitmap is used by FW to indicate supported services
bitmap for services excedding the current limitation of 128. Add support
to save and use this bitmap to check services supported in FW. Also,
change exisiting services bitmap to be dynamic allocated buffer to
optimize the buffer used to save the bitmap.
Change-Id: I24a0321bc1a06ee3aedf1c6acbc379e907bbd464
CRs-Fixed: 2103617
Add new Bad RSSI threshold offset for 2G to 5G roam and flags
to roam_offload_scan_rssi_params and fill them in the WMI cmd TLV
to pass it to the firmware.
Change-Id: I78876f5104e67280b1342ec0957d0162edbaf502
CRs-Fixed: 2105894
Fill the roaming parameters wmi_roam_bg_scan_roaming_param and
send them to firmware to be consumed for the background roaming
at bad RSSI
Change-Id: I08786141d28f8459aad27aaf53816ec4cdec7f08
CRs-Fixed: 2082906
D1.4 defines Supported HE-MCS and NSS Set (under HE-cap)
differently from its earlier versions in D1.0/D1.3.
Make code changes to bring in these new changes.
Change-Id: I4a482e48c071bbbe02c7f33645b7fe80870482d9
CRs-fixed: 2100674
Add support to fetch min and max tx power from target for
a given set of mcs, nss, chainmask, bw, and other rate flags.
Change-Id: Iafe082db81503a52bdc704d4b71d86d23788fddb
CRs-Fixed: 2061802
Add required WMI commands to communicate support of
EXT NSS Signaling between host and FW. Also, if
EXT NSS Signaling is supported the use new WMI to
communicate the required information between host and FW.
Change-Id: If3e1ef11a55f8fbdffddb3b10963878a6a2ca415
CRs-Fixed: 2089043
In WMI/WMA, data from event buffer from FW is used without
sanity checks for upper limit in multiple places. This might
lead to a potential integer overflow further leading to buffer
corruption
Add upper bound checks for max limit of event buffer (1536)
in all affected places to prevent the potential integer
overflow
Change-Id: Ic9194a27c4a4c63fc68ff7fc61165a53e66ca4f4
CRs-Fixed: 2095545
qcacld-2.0 to qcacmn propagation
Add support to include only selective IEs in probe requests in
order to improve user's privacy.
Change-Id: I59cf4181f60f5b4cd87a32fbcf29160d87ca59c8
CRs-Fixed: 1105495
FW implementation is updated to add more fields in chan info event.
Update host implementation to extract these fields.
Change-Id: I4935f3aa1c2e87d27a13a29651db8d8835cb4f91
CRs-Fixed: 2090787
Add a field ldpc_rx_enabled to vdev start parameters so that
this information can be propagated from the upper layers to
WMI and further to firmware.
Change-Id: I25fd148f77d86eb646a0e40fef6ac99c4fbcdf22
CRs-Fixed: 2023893
qcacld-2.0 to qcacmn propagation
Randomize probe request's source address and sequence number to
improve user's privacy.
Change-Id: I265f15476f1a23a268f159a44b6a3e4243fb9068
CRs-Fixed: 1105081
