Historically, recovery was triggered if PDEV suspend failed, but the
logic was lost during componentization. Restore the previous logic of
triggering recovery on PDEV suspend timeout.
Change-Id: I6e193e98c5ef45fd7ab4b6595ea85d986fa84131
CRs-Fixed: 2215588
Use correct enum type for function variable in hdd_reset_tcp_delack
& return type in iw_get_policy_manager_ut_ops.
Change-Id: Iec8a678410b90dbe081c007f1bbfaa31f255799e
CRs-Fixed: 2213784
Some features depend on whether the host architecture is ARM or not.
Define WLAN_HOST_ARCH_ARM so these features are included correctly.
Change-Id: Ibd19858edf5c24841fc31d342ab448e635ae0d68
CRs-Fixed: 2215586
qcacld-2.0 to qcacld-3.0 propagation
hdd_get_hosttime_from_targettime() will get wrong host time when
it's longer than WLAN_HDD_CAPTURE_TSF_INTERVAL_SEC from last
TSF-HOST update. To fix this, TSF-HOST should be updated in at most
WLAN_HDD_CAPTURE_TSF_INTERVAL_SEC, it couldn't be achieved if the
timer interval is also WLAN_HDD_CAPTURE_TSF_INTERVAL_SEC, due to
processing or scheduling delay. So deduct several seconds from
WLAN_HDD_CAPTURE_TSF_INTERVAL_SEC.
Change-Id: Icce41c74568370d98509a2ebe69ae62e99ad2ce8
CRs-Fixed: 2104915
Fix usage of flag is_waiting_for_key such that it programs wake
timer only for secure STA connected state.
Change-Id: I336696f15c5fc932a4eedf5534c2182bda3d2e27
CRs-Fixed: 2214809
When a monitor mode vdev is created, a self-peer is created
automatically. However, when the vdev is destroyed, the self-peer is
leaked. Remove the self-peer when a monitor mode vdev is removed.
Change-Id: Ib6855957b56d057da9bf9a176b328cd9ec8dab96
CRs-Fixed: 2211141
Currently HDD defines function hdd_wlan_get_freq() which uses
it own static table to perform channel to frequency mapping. This
duplicates functionality provided by the converged regulatory
function wlan_reg_chan_to_freq(), so remove hdd_wlan_get_freq()
and update its only client to use wlan_reg_chan_to_freq().
Change-Id: I6fcb11b9b967ab77dcd7c8d0c1bc185ee3c18913
CRs-Fixed: 2215576
Check if IPA is enabled in ini configuration before doing
IPA operations from northbound interface calls.
Change-Id: Ic075562c1afe52d26ebefaff058fde7c90d4f7d1
CRs-Fixed: 2215269
When IPA RM resources are not granted immediately, IPA
WDI pipes activation is deferred and activated from the
RM notify callback when resources are granted. In this
case after pipe activation resource loading flag is not
set to true. As a result when IPA wants to access the WLAN
resource driver sends wrong status as resource loading in
progress. So reset the flag when IPA WDI pipes activation
is deferred and activated from rm notification handler.
Change-Id: Ia336181f0471a9a8d6c853aefa19a23102077222
CRS-Fixed: 2198206
Currently, number of bytes being copied into keyname_nai buffer is
key_nai_length, which can be greater than FILS_MAX_KEYNAME_NAI_LENGTH.
But the size of keyname_nai is limited to FILS_MAX_KEYNAME_NAI_LENGTH,
which may cause buffer overflow.
To address this issue, add check for key_nai_length against
FILS_MAX_KEYNAME_NAI_LENGTH to ensure buffer overflow does not happen.
Change-Id: I88c89b1fef6fdb1c4bd93e0fb8f3e54634b4940f
CRs-Fixed: 2208881
On receiving del station command, SAP is not updating the del
station reason code properly in station info.
Update the correct reason code in station info whenever a
del station or deauth station event comes.
Change-Id: I2004dc21f18682dbc7dee488e7b55bfccd0d242a
CRs-Fixed: 2178538
Currently sap netdev interface stats are updated even for the
IPA uc HW offload packets. This is not correct as the stats need
to be updated only for the exception packets which comes to the
host and forwarded to netdev kernel. In this change update the
soft ap interface stats only for the exception packets which
comes to host.
Change-Id: I0b017cf1d5ff74234bfee540ef37ee03c5131c48
CRs-Fixed: 2164582
Call cdp_set_pn_check to set PN check & security type in data path.
Required for RX defragmentation on Napier.
Change-Id: Ie00613be2e2713c58b4d83aa1c31eb4451442477
CRs-Fixed: 2213691
Deprecate enum wmi_dwelltime_adaptive_mode and use enum
scan_dwelltime_adaptive_mode defined in scan component.
Change-Id: I9c33b852172d9208fb8440c6dc71a12aefd717da
CRs-Fixed: 2213150
In function wma_unified_radio_tx_power_level_stats_event_handler,
radio_id is checked if it is greater than num_radio. However, radio_id
is an array index and its range is 0 to (num_radio-1). So if radio_id
is equal to num_radio, a buffer overflow would occur while accessing
the array link_stats_results->results.
Fix sanity check to return error if radio_id is greater than or equal
to num_radio in wma_unified_radio_tx_power_level_stats_event_handler.
Change-Id: Ib48e8388206f28e7b2cb80177363655008a109e6
CRs-Fixed: 2209106
Add changes to trigger SAE using cfg80211 API's. Also, add
changes to handle SAE status that comes via cfg80211 ops
Change-Id: Ie113f84d4fdc927fff26b13b0e0551b92b22fd5d
CRs-Fixed: 2211041
wmi_handle is needed while registering for wmi event handler. But it is
not set for pdev before registering for EGAP event handler. With this,
EGAP support remains disabled which may end up in increased power
consumption.
Move setting of wmi_handle in pdev before registering for EGAP event.
Change-Id: Icb8accc738a3aaad7fbc1201c7c0d0b77945e8f2
CRs-Fixed: 2203380
The Data Path in the WLAN host driver needs to be sending DHCP START/
STOP indications to FW during DHCP based IP address acquisition phase
in the SAP mode.
Inspect the Tx/Rx frame, and send the notification to the FW through
WMI message.
Change-Id: Iad6308980a7158516f341b97f3baffab1e4c4bc3
CRs-Fixed: 2114816
Enable auto PS timer in hdd config such that adrastea
is never stuck in full power mode.
Change-Id: I2668b7c1ba64b67bf524e449e96ec6d79a2c1676
CRs-Fixed: 2214124
wlan_hdd_disconnect wait time is 5 second.
WMA_VDEV_STOP_REQUEST_TIMEOUT is 6 second.There have 1 sec gap.
Which means if timeout happend, wlan_hdd_disconnect will exit before
wma_vdev_resp_timer is invoked. wma_vdev_resp_timer will trigger SME
to invoke callback hdd_dis_connect_handler to release vdev obj ref
count.
If unload driver during the time gap, vdev cannot destory
successfully because hdd_dis_connect_handler haven't be called.
rmmod will wait for wlan_hdd_disconnect exiting then unload driver.
So increase hdd disconnect wait time. Make sure wlan_hdd_disconnect
exit after lower layer timeout and hdd disconnect handler be called.
Change-Id: I8fddae200ed675b93c0f300a9e28dbbfd3a976a6
CRs-Fixed: 2201448
If user configures the phymode to 11ac then band is configured
with only 5G that disables the 2.4G channels.
Instead of setting the band to 5G, enable the 5G band during
11ac phymode update if the 5G band is not enabled.
Change-Id: I4a4fa3a0bddb345e7ea73b7b36f0581644029316
CRs-Fixed: 2210359
Connected AP scan entry is aged out if beacon
is not recieved within scan age out time.
Update mlme information of the connected AP/BSSID
scan entry so that scan age out hanlder will not
age it out even though the last beacon recieved
time is greater than the configured scan age out value.
Change-Id: I14c68c28459080623ca62c0bad9052e38d7fb348
CRs-Fixed: 2202010
When hw_mode=any (both 2.4Ghz nad 5Ghz bands included),
RSSI and BSS adjustment for 2.4Ghz channels happens 2
times, once in sap_interference_rssi_count() and once
in sap_interference_rssi_count_5G() which leads to wrong
computation of weight.
Check whether a channel is 2.4Ghz or 5Ghz channel before
calling the corresponding RSSI, BSS adjustment function.
Change-Id: I6c318e489cfa177c6de088e7cdfb4779ceb99b2f
CRs-Fixed: 2208069
Set AMSDU in AMPDU support in addba response frames only
if supports the feature.
Change-Id: Ibdb51e9055199b688f494f31fd484b246ec11163
CRs-Fixed: 2211374
lim_send_sme_neighbor_bss_ind() is unused so remove it and all related
data structures.
Change-Id: I373fb570f3b368dc79ce08b7acbc1026a7e19758
CRs-Fixed: 2213056
struct csr_scanstruct contains fields currentCountryBssid and
currentCountryRSSI which are obsolete, so remove them.
Change-Id: I47f40cc687b0e905d3c2db4ad67fa32f70d5181e
CRs-Fixed: 2212972
