Increase value of AST skid limit for QCN7605 to avoid
peer create failure in FW in case of AST hash collision.
Change-Id: If931229d3b1458556a6e5c1023fb646b7274bedd
CRs-Fixed: 2517716
Presently, in hdd_reset_all_adapters, the removal of the sta_info
structures via hdd_deregister_sta happens inside a loop that is not safe
for removal. This can cause various potential invalid memory access from
use-after-free to null-dereference.
To rectify this, use the delete safe API to loop over the sta info
entries.
Change-Id: I3d5526af8d8f819874f6bcffabf27ceb74f6f32a
CRs-Fixed: 2557364
As part of Ie9ffc701d93ed1c050375dd56151b7a0da69cdce the STA mode
channel change was added in disconnected state for spectral scan
test at CV2X platform.
Now with iwpriv wlan0 setMonChan on STA mode, a monitor mode
pe_session is created in PE/LIM which take ref count with
WLAN_LEGACY_MAC_ID. As the interface is STA type this session
is not deleted when vdev is deleted. This lead to vdev ref leak.
This code is broken and is no longer in use and cause vdev
ref leak when executed. Thus revert
Ie9ffc701d93ed1c050375dd56151b7a0da69cdce.
Also move the lim session create to hdd_set_mon_rx_cb during
vdev create, as it is deleted during vdev delete.
Change-Id: Ib60aa2bd2746a8cd17f20efa7506c18784a42630
CRs-Fixed: 2557160
In function hdd_association_completion_handler, there are missing NULL
checks for couple of heap allocated variables. This can lead to
potential NULL pointer dereference.
Add NULL pointer sanity check.
Change-Id: I4343833b9e12da0012cfbff006bd8891e9bae025
CRs-Fixed: 2556755
From android Q, it uses a random MAC to connect to different
SSIDs which causes the interface down/up, the vdev will be
deleted and the latency level info is lost in firmware.
To fix this, save the latency level and reconfig it to fw
after vdev creates.
Change-Id: Ifac93fb869553d0f9eb553d5c41da43c8b014ad8
CRs-Fixed: 2554736
Modify the following 2 APIs' code and parameters to use frequency
instead of channel ID:
sme_get_operation_channel
wlan_hdd_update_survey_info
Change-Id: I90f05cc7fedd061bf08b47299d2fb6530c470136
CRs-Fixed: 2554149
Host will set HE IE by channel mode, and needn't copy he ie to
additional ie. Otherwise, there will be two he ies in beacon frames of
P2P GO.
Change-Id: Ia144bb5e96f00114658a371ef27c65f90a6c7df2
CRs-Fixed: 2549450
Populate HE 160MHz mcs map only from 5G band mac-phy capabilities.
Session bandwith is checked to disable HE mcs for 160MHz, but session
bandwidth is updated after the MCS is disabled. Update HE 160MHz
MCS map after session bandwidth is derived.
Change-Id: I94813ae269856b34cf1ea6c6a13013738909c674
CRs-Fixed: 2556457
Newly introduced WMI macro for group management cipher suite is:
WMI_CIPHER_BIP_GMAC_256 0xf
Currently, host updates the localy defined macro for group
management cipher suite to the firmware only as part of RSO
commands over the WMI_AP_PROFILE command. Host should update
group management cipher suite as per WMI cipher macro.
Fix is to update the group management cipher suite in RSO cmd
as per WMI cipher macro.
Change-Id: I81dc5e800c55d1eb6cd0447265205d3413b29177
CRs-Fixed: 2547507
Modify the following 2 APIs' code and parameters to use frequency
instead of channel ID:
sme_get_roam_scan_channel_list
drv_cmd_get_roam_scan_channels
Change-Id: I4e6edee71ef25bf73c170813159f5078f0c3e612
CRs-Fixed: 2554148
Currently in the driver, the cache sta info is not being cleaned up
before deinit of the SAP operation. This can lead to potential memory
leaks during driver unload.
Cleanup the remaining cached sta structures before deinit.
Change-Id: I75a61d8dbf8a6a8372882d2dcc978cc1dd0fb406
CRs-Fixed: 2550245
Modify the following API code and parameters to make
sure they're using frequency instead of channel ID:
csr_roam_sort_channel_for_early_stop
Change-Id: Ifaab55099d00988bf56f13dcadca8a1f6000e646
CRs-Fixed: 2554178
target_if F/W event handler is moved from wma to cmn part per
MCL/WIN converge requirement.
Change-Id: I583059190827c9aed8d8089412a4cfac92ddf4c9
CRs-Fixed: 2554859
Vdev start/stop/delete events have been registered in
target_if_vdev_mgr_wmi_event_register in MCL/WIN common code.
Change MACRO name SERIALIZE_VDEV_RESP_TIMER to
SERIALIZE_VDEV_RESP.
Change-Id: I4d54a4755d7311b488f12f46a73db7e4645a4e0b
CRs-Fixed: 2554732
Replace channel ID with channel frequency in tSirMacChanNum
limReassocChannelId under struct pe_session
Change-Id: Ice8565ebcfcb863b7da7ec14a36b3abf3332ebab
CRs-Fixed: 2556247
When a particular vdev is deleted, the corresponding rx
packets which have been queued to the rx thread are not
flushed. Hence when such packets are submitted to the
network stack, the dev for this skb will be invalid,
since we have already freed the adapter.
Flush out the packets in the rx thread queues, before
deleting the vdev.
CRs-Fixed: 2552140
Change-Id: Ia49af2c203c64077f7fd87524bb4caa4060e0044
Currently, NDI and NDP creation is happening only if the
corresponding concurrency is allowed. But NDI should be allowed
to create/delete in all concurrent scenarios. So, don't validate
the other interfaces present on device for NDI creation/deletion
and validate only for NDP requests.
Change-Id: I8e8817ac63f1f94b48fe71a30ddf1d49183d263a
CRs-Fixed: 2552623
"intf_ch" is updated by wlansap_check_cc_intf function.
"intf_ch_freq" needs to be updated based on new intf_ch.
Change-Id: I64a9ded8f6fa1ebd9cc88f69098c88a7a01ca82c
CRs-Fixed: 2555848
If the CPU latency requirement is not there, set the pm qos vote
to default value. The target values of resume latency and active
state latency tolerance are the minimum of the request values held
in the parameter list elements.
Change-Id: Ia5a68c024c08043da840490b6207803523f5a34a
CRs-Fixed: 2554446
Currently the driver parses the BTM list
in the API lim_add_roam_blacklist_ap, but
the pointer to the source list is not incremented
which leads to addition of the same entry multiple
times.
Fix is to increment the pointer to the list for
every iteration.
Change-Id: I057c6e314827768679085047b32e524e4273b9fc
CRs-Fixed: 2554039
Modify the following 2 APIs' code and parameters to make
sure they're using frequency instead of channel ID:
csr_get_infra_operation_channel
sme_search_in_base_ch_lst
Change-Id: I2010aac81a3297d2c274ac9f17784f8f5cbf846e
CRs-Fixed: 2554643
Modify the following APIs' code and parameters to make
sure they're using frequency instead of channel ID:
csr_scan_get_next_command_state
csr_handle_nxt_cmd
csr_scan_callback
Change-Id: I3bbbc20f906f0b757659f553e1ddb3d2ddd084d8
CRs-Fixed: 2554060
Modify the following 2 APIs' code and parameters to make
sure they're using frequency instead of channel ID:
sme_get_status_for_candidate
csr_is_mcc_channel
Change-Id: If721813518caeb87c4de7c3d52ae18fd080cd713
CRs-Fixed: 2554048
Modify the following 2 APIs' code and parameters to make
sure they're using frequency instead of channel ID:
csr_roam_get_ibss_start_channel_number50
csr_roam_get_ibss_start_channel_number24
Change-Id: I5d3c94f4266fdfc08efe2a0e87ac406a0e7cd5ea
CRs-Fixed: 2554196
If defined NDP_SAP_CONCURRENCY_ENABLE, allow SAP or SAP+SAP
concurrency with NAN and don't disable NDI when call
ucfg_nan_check_and_disable_unsupported_ndi.
Change-Id: I684df7608623f8eb77d485a61e8d9c6f3319574a
CRs-Fixed: 2547493
Set cpu_mask for affine cores on init before sending a
request to PM QoS interface to insert a element into the
list for DMA latency in the QoS framework.
Change-Id: I81f17077c6ddce69c99047c46cef008b6b195d77
CRs-Fixed: 2551349
