Encoder preprocessing feature requires additional cycles
and bw to support this feature if it is enabled.
Change-Id: I46de42dd0cb0d5a7cd9fdf00beeaefd50e40798e
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
In __interface_queues_init() api somtimes map() call is failing.
Map failure scenario we were not freeing allocated memory. So
added change to cleanup allocated memory incase of map failure
scenario.
Change-Id: I04b196e55a5f080a4ec973aa166f7e1b6525a58c
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
- Allow dec sw fence enablement only if decode order is set and
non interlace type session.
- Enable low latency mode if sw fence is enabled.
- Signal fence if FBD length > 0.
Change-Id: Ib59c2de51f621b796e68fe2aba68d9fca3ff4272
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
crop width and height should be calculated using
left and top as references.
Change-Id: I463cdc9557dab3ae7200cb6aaf60fce399571d30
Signed-off-by: Darshana Patil <darshana@quicinc.com>
- Enable ROI for VBR, CBR_CFR, CBR_CFR bitrate modes.
- Disable ROI feature, when rotation, downscaling/scaling
enable,
- Disable adaptive blur, when ROI feature is enable.
Change-Id: If645a255bca93b90fe5cee5a735d7ffcd2a6bc5c
Signed-off-by: Roopangkumar Patel <quic_rooppate@quicinc.com>
1. adjust client set non-realtime priroty with NRT_PRIORITY_OFFSET (2)
2. if total mbps is more than max_mbps
a. allow encode session by reducing decoder sessions priority by 1
b. allow decode session by moving it to non-realtime session
in order to not disturb the ongoing sessions
Change-Id: I96fd2ac75c123d681982fb9a2c06ac51d15bd59a
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
adding comments to avoid changes in kernel space
logs that are used by post processing scripts
Change-Id: I66ee9743866d12c740c3791b92534eaf7601436d
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
adding kernel space logs used by post processing
scripts as macros to avoid changes in them.
Change-Id: Iea0fb0514c134767f063902ff98fd756898ef7c4
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Divided database entries into 2 parts
[1] struct msm_platform_inst_capability -> it tracks cap_id,
domain, codec, min, max, step, default, v4l2_id, hfi_id, flags.
[2] struct msm_platform_inst_cap_dependency -> this will track
cap_id, domain, codec, parents, childrens, adjust and set
callbacks.
It will help to reduce number of database entries.
Change-Id: I692968b0f6804b45371e8cf4af6407e57df54bb9
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
when create_bufs ioctl is called for meta port, v4l2
framework calls queue_setup with num_planes as 1.
fixed the num_planes condition by updating it for only
input and output ports.
removed a condition to check if client has set unsupported
bits for metadata controls.
Change-Id: I0faf2cfc2827af7d3992bda63a04d4203f13c9e1
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
during opt_list iteration, eligible node gets added into
root_list but if incase that node is having children then
child nodes were not getting added into opt_list. So added
change to address this corner case.
Change-Id: Ie402a9d57b5b00cb94ef30e2345c8c4580fc8f69
Signed-off-by: Govindaraj Rajagopal <quic_grajagop@quicinc.com>
For VPSS, FW requests more bandwidth from HW.
In order to support inline processing, FW introduced
request preprcess property.
Enble this property only when following conditions are met:
- CAC-BRS is required
- don't have EVA stats.
- Upto 4k@60 fps, max( frame rate, operating rate) <= 60
Change-Id: I3cf83483d9320e5dfe20617b37a54b9d5fbcffd8
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
- send '-ENOMEM' after max mbps is reached
Change-Id: I6d597021046ea375f2131c2e40ac07d1aebdd9b8
Signed-off-by: Deepa Guthyappa Madivalara <quic_dmadival@quicinc.com>
Mark I Frame as Key frames for all codecs.
Change-Id: I4fc73c076a93a959f4ed97ec65398ac3315af602
Signed-off-by: Akshata Sahukar <quic_asahukar@quicinc.com>
update msm_vidc_platform.c to keep all common API's
and macro's in a single file to avoid redundancy.
Change-Id: I43869f54514ab8c531b6e27b84ce0a6c1f1806ce
Signed-off-by: Ankush Mitra <quic_ankumitr@quicinc.com>
Currently driver supports only random intra refresh, extend
it to support cyclic intra refresh too.
Cyclic intra refresh is supported dynamically as well.
- If intra refresh type is set and num of LCU’s to be refreshed
are non-zero before session start, intra refresh will be enabled
throughout the session.
Any further dynamic settings in the number of LCU’s including 0
will be honored accordingly.
- If intra refresh type is set and num of LCU’s to be refreshed are zero
before session start, intra refresh will be disabled.
When client sets it to non-zero value dynamically, driver will set
HFI_PROP_REQUEST_SYNC_FRAME with
HFI_SYNC_FRAME_REQUEST_WITH_PREFIX_SEQ_HDR.
Driver needs to send HFI_PROP_REQUEST_SYNC_FRAME only at time of
CIR Enable, no need to send at time of disable/enable again.
Change-Id: I10a2fb22d131353721ee658213ed807ce0794009
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
1. Remove load based admission control for decoder.
2. For decoder, use max of frame rate, operating rate,
timestamp rate and input rate for power calculations.
3. For encoder, use max of frame rate and operating rate
for power calculations.
Change-Id: Ibdb2d4b29438d7f656a27771953d10e0a0e72edd
v4l2-compliance test does not support private codecs. Hence
added check to not return HEIC codec when enum_fmt is called.
Change-Id: Iff6fbb45b436e39e8b7c181859dbc1519338d003
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Introduce new v4l2 controls to set frame rate and operating rate
on decoder as VIDIOC_S/G_PARM is not allowed on decoder.
fix: v4l2-compliance:S/G_PARM
Change-Id: I6c090c0ae541a086c73bb79564dd29ed4aa755b3
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
v4l2 compliance fixes for test formats
fixes:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
Change-Id: I23c193ab5785bb10d070fa3085678d9669f53a92
Signed-off-by: Darshana Patil <quic_darshana@quicinc.com>
Remove dependency between min quality, CAC and quality boost.
Accept quality boost value from client and if client did not
set then enable max quality boost upto 4k@60fps and disable after that.
Change-Id: I0685065b8dee8754aff2cf5f176a2f40e9e080dd
Signed-off-by: Mahesh Kumar Sharma <quic_smahesh@quicinc.com>
Update input, output and crop resolution based in client provided
resolution on input port as per the v4l2 compliance test expectation.
Change-Id: I56f197d72cc132f38c00842b28b23b20c508cf23
Signed-off-by: Maheshwar Ajja <quic_majja@quicinc.com>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
