MC/BC frames are routed to FW ring based on routing config for MC/BC
data as SRC: FW2RXDMA and DST: RXDMA2DFW.
Data offload features in FW will take care of routing the MC/BC frames
to FW in both active and low power modes.
Make this change only for kiwi/peach using hal ops.
Change-Id: Id8665261a512c9db3e808f95082ff82b47f01ade
CRs-Fixed: 3464036
With the convergence of SCS and SAWF, do not override the TID
for legacy SCS case. Retain the value obtained using DSCP in
this case.
CRs-Fixed: 3460620
Change-Id: I19502d09f5f37376bac08eb05fcf770c71331e1c
Add CDP api support for umac reset init API, these apis are expected
to be called whenever shmem is deinitialized.
Change-Id: I307c586454580ab8f83b0d515defa93d4e8ff656
CRs-Fixed: 3458268
Use monitor pkt tlvs size and monitor buffer size
instead of data pkt tlv size and data pkt buffer size.
Change-Id: I3099f6526aa11b353c8a5178de450d48f141a461
CRs-Fixed: 3406962
In SDX_75, doorbell register is only writable not readable
so fix printing of stats for TX ring.
Change-Id: I058c4241b9c91902f32ed76f099f7501e667c78b
CRs-Fixed: 3436677
Currently, HTT Tx ring packet type flag is set as bitwise operation
which is incorrect and results in "Debug Assert Caught".
Set this CTRL and DATA packet type flag with a value of 1.
Change-Id: I62e89fe637441fcc680ea8d5fe8d157d8e7142ae
CRs-Fixed: 3415733
address of array 'tx_ppdu_info->hal_txmon.rx_user_status' will always
evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
Change-Id: Ic148f34b82ce756eb07173b43f8f155a7b4a12d9
CRs-Fixed: 3415726
dp_peer ref_cnt is increased in dp_rx_mon_populate_cfr_ppdu_info(),
but it does not release it at last, this leads to dp_peer ref_cnt
leak which then dp_peer memory can't be freed and corresponding dp_vdev
leaked as well.
release the ref_cnt for dp_peer at the end of
dp_rx_mon_populate_cfr_ppdu_info().
Change-Id: I8ac301609deb3790ad9f3d6eda85d502cede9799
CRs-Fixed: 3461642
1. Check Tx halt during umac reset and avoid halt if set already.
2. Perform SRNG disable only in case of umac reset
Change-Id: Id364a6460a64e83002b5c96e08031ad2a0bc8fd7
CRs-Fixed: 3459427
variable is not defined leading to compilation
issue when vlan is enable in SDX.
Fix is to correct the variable name.
Change-Id: I2d3618d9ad3d8a48026cb8c737ce6ede733cb478
CRs-Fixed: 3462236
Update the Umac reset state machine before sending the command
to firmware as we might get the response from firmware even
before the state is updated.
Change-Id: I3ca2560d91c39d34e7efe156521c2ba5114a7536
CRs-Fixed: 3462821
Record hardware TX descriptor history during TX enqueue for WCN6450
(Rhine hardware). This will aid in debugging data path issues.
Change-Id: I99c2a88ca161f89d529cba92692811fadee28938
CRs-Fixed: 3462090
Add RX debug history support and first packet marking
after WOW for RHINE architecture based RX path.
Change-Id: Ife719bdc3e5031a63b3f97c5842a220caeda8ffd
CRs-Fixed: 3452940
Per new design, FW will use HTT_MSDU_QTYPE_USER_SPECIFIED instead of
HTT_MSDU_QTYPE_LATENCY_TOLERANT for TX ILP support judgement,
change it in host part accordingly.
Change-Id: I0318801c4fe11ca623a99459d9f6820acb1c8fea
CRs-Fixed: 3462232
On txrx_stats 260, wdi event stats are displayed with content as zero.
Which need to be displayed only on non zero value.
Change-Id: I5ad4595e35e977dd141584c92cdc164e153b7c0f
CRs-Fixed: 3454039
In the LPM case, if the tx desc has been force
freed in the dp_bus_suspend ->dp_find_missing_tx_comp,
then after data transfer resumed, fw may report
tx complete for the same tx desc, and we should
skip it to avoid null pointer access.
The reason why set default vdev_id to 0xff is:
Since in this case, it happned disconnect before
suspend, so the tx desc pool will be deleted and
reinitalized when resume, so the pdev is null in
the force freed tx_desc and vdev_id should be changed
from 0 to DP_INVALID_VDEV_ID, otherwise the below logic
in the tx complete handler will not skip handling
this freed tx_desc.
if (qdf_unlikely((tx_desc->vdev_id == DP_INVALID_VDEV_ID) &&
!tx_desc->flags)) {
DP_STATS_INC(soc, tx.tx_comp_exception,1);
dp_tx_desc_check_corruption(tx_desc);
continue;
}
Change-Id: I5f3ff6fd783893f92a0fd6b3db7457b280fcb1c8
CRs-Fixed: 3447465
Currently we only support DBDC with IPA, to support
TBTC we need to provide pipe setup for third WKK
radio to IPA, so that IPA can register the pipes
in wlan2 smmu context bank for third WKK radio.
Change-Id: I941c0ddec4f23406aa5acabbfb80a7499d830d75
CRs-Fixed: 3456002
As we are using index_look_up_overwrite field in TX
descriptor with WDS_EXT need to reset this field in
FAST TX API even in AP mode
Change-Id: I6027a2d99be715973af5f8091755f0a4a9256010
CRs-Fixed: 3450922
Fix intraBSS MCAST traffic issue between legacy and MLO
clients. Fix includes below changes
1. Change get_mcast_primary_vdev to return correct value
in case current VDEV is mcast primary
2. Avoid checking vdev->mlo_dev as it is set only for
mcast primary VDEV
3. In intraBSS ucast case use destination SOC to get the
destination peer with da_peer_id
Change-Id: I0d7a890bc62f703cd92e7c9edc20768a9a487d06
CRs-Fixed: 3456458
As IPA has moved out of the kernel, ipa_uc_reg_rdyCB
interface call from WLAN is not needed anymore
as ipa_wdi_init_per_inst() initialization call will
handle this. This change will add support to retain
this call only for legacy devices.
Change-Id: Icb479562e091d388e03ef5a38b3e95d4dbf06271
CRs-Fixed: 3459071
In WBM2SW Rx Error path for BE
specific functionality
1) HAL API's/Function pointers are replaced
with specific function calls.
2) Efficient read/write of WBM Error Info
from HAL Rx desc.
3) Minimize reading data from Nbuf TLV.
Change-Id: Ic8793ffcbeb2411c9b81fb32acae062e8a1f40cc
CRs-Fixed: 3362828
There is an ill use of qdf_mem_set() in dp_htt_t2h_msg_handler().
This change fixes this issue by assigning 0 to the local struct
variable instead of the memset, which can also reduce some code.
Change-Id: I303c1adc167a8e1ab82692a294fe28bc4e8a97dc
CRs-Fixed: 3443572
Add DP API to evaluate if TX ILP needs to be enabled,
it is only enabled if following two conditions are met,
(1) INI for TX ILP is enabled
(2) htt msdu index to qtype mapping table index 3 value is
HTT_MSDU_QTYPE_LATENCY_TOLERANT
Change-Id: I4d0c1103941b8b12b8441762dc6b45d28ee1df21
CRs-Fixed: 3447096
Arrays are not initialize and due to which
elements in array might be used uninitialized.
To avoid this case, arrays are initialized to NULL.
Change-Id: Ib83c8f512369f877b9c39d9e6eb431e9bdca7ad9
CRs-Fixed: 3449024
With pcie 1 and pcie slot 2, if ipa updates the 40th bit then
access to pcie memory region is going in pcie_0 memory region.
IPA is not allowed to update 40th bit for any address given
from pcie_1 and pcie_2 memory region.
Fix is do not send the pcie update status as true to IPA for DB address,
so that IPA will take long path of mapping the address in smmu context and
then it will access the pcie region.
Change-Id: Ieeaf1262cef927ca89cded3714c6e37550b8f197
CRs-Fixed: 3448895
FW sends ppdu_id for every TLV in Tx HTT PPDU completion path.
This ppdu_id has 8 MSB bits filled with FW metadata which is different
for every TLV. Host uses this ppdu_id for list maintenance.
Presence of the FW metadata results in ppdu_id mismatch for different
TLVs even when they belong to the same PPDU.
Consider only LSB 24 bits for ppdu_id on host side.
Change-Id: Ic6ec780fe97f0597fcd841b33ac0dce33ad986c9
CRs-Fixed: 3445603
CUrrently if IPA offload is enabled in SAP mode
the default Rx routing is to IPA serviced REO rings.
With this change the default raouting is set to
WLAN HOST serviced REO rings.
Change-Id: Ibf9dead063c9d9fbc6b1fd502342ea13456b2473
CRs-Fixed: 3421879
Move fail_cnt and abort_count to soc->stats
struct, so that we can retrieve stats
during a crash. Also fix few other errors
found during initial tests.
Change-Id: Ieaee10b2dd2b5e589c21aa50c83dcf352623275d
CRs-Fixed: 3428501
Buffer was freed before processing the TLVs
(while flushing) leading to use after free access.
CRs-Fixed: 3425044
Change-Id: Ida3bcf9add95041c43b2b1e8e3450853bd0ed88c
IPA_OFFLOAD will be enabled by default for MSM.
This is a WAR to disable IPA offload during compile
time, based on the IPA_WDI_OPT_DPATH feature flag from IPA.
If the flag is not defined in the IPA test
module file, IPA offload path will be disabled.
This is a WAR, and will be fixed once a Kernel config is
available to enable or disable the optional wifi datapath
feature.
Change-Id: I7aad275f4d86a2ffc239f1fe343de31ec2988fad
CRs-Fixed: 3431972
