WMI recording is done per pdev and hence an instance of
debugfs directory (eg: WMI0, WMI1, WMI2 for 3 radio boards)
has to be created in /sys/kernel/debug/ path.
The wmi handle is per pdev and hence is causing the problem of wmi_instance
being 0 always as each pdev has its own wmi_handle.
WMI1 and WMI2 debugfs directories are not created as wmi_instance
is always 0.
WMI debugfs directory is created for every pdev of the psoc and naming
convention is changed to WMI_SOCx_PDEVx.
Change-Id: Ieb7e9d072d84f699588a8f719508c5cd8d9873fb
CRs-Fixed: 2232472
Add definitions for the enum WMI_HOST_SMART_LOG_SCENARIO which defines
individual smart logging scenarios which can be enabled/disabled. Also
add utility macros to set/get the same.
Change-Id: I2b188a6f5cb202868d43253e706115de570cb1e8
CRs-Fixed: 2162053
Pdev parameter to prioritize IGMP packets are supported through
WMI_PDEV_PARAM_IGMPMLD_AC_OVERRIDE. In legacy platforms, they are
supported by different pdev parameters WMI_PDEV_PARAM_IGMPMLD_OVERRIDE
and WMI_PDEV_PARAM_IGMPMLD_TID.
Map host maintained pdev params wmi_pdev_param_igmpmld_override and
wmi_pdev_param_igmpmld_tid to WMI_PDEV_PARAM_IGMPMLD_AC_OVERRIDE since
this is the one supported by TLV based targets.
Change-Id: Ia11787265bd926f257dc1b028552c6e7f1f733d2
CRs-Fixed: 2272219
Worker thread WMI processing API has more broader use now. So make it
non-static.
CRs-Fixed: 2268243
Change-Id: Iae51e1115f5f3664d08c891e8a42d24bd3ef7bcf
Update the definition of wmi_fatal_condition_event, to include
type+subtype specific data under type_subtype_specific_data.
CRs-Fixed: 2267901
Change-Id: I7f5be6ced26a88ac86ab16efd915a5e6ca5dc608
1. Add support upto 2048 buffers in the ring
2. Add API to print current ring status per module per pdev
3. Start module ID numbering from 0
Change-Id: I7954007c6c486877ffb2ab91724885af2fbaab8c
CRs-Fixed: 2263968
Add host WMI definitions for the type and subtype fields in
wmi_fatal_condition_event.
CRs-Fixed: 2257956
Change-Id: I2c7043081de86a42b3e89ade34d4a1ffc0c39d77
Android Packet Filter 3.0 requires the framework to be able to
read and write into the APF work memory in the Firmware. It
also requires to be able to enable or disable the interpreter.
New WMI commands are defined for read/write/enable/disable
operations.
Complete the implementation of these new commands.
Change-Id: I852d61eb213d9ae530e8a71069144ef35816f5b8
CRs-Fixed: 2184971
wmi_buf_alloc() API expects length to be passed of type
uint16_t. However, the callers pass uint32_t to it.
This might result in overflow and illegal memory access
thereafter. The fix is to modify the API signature accordingly.
Change-Id: If09da4978d421269b884f7d3c933c49c81651475
CRs-Fixed: 2218346
Add service enum and populate service id for listen
interval offload support so that wmi_service_enabled
API can be used to check if the support is enabled.
Add enum for listen interval offload support
Change-Id: I62dbadb4980f54db8431ad53d096f7fc210d25d7
CRs-Fixed: 2253684
QCN7605 requires Management frames to be transported over WMI.
Enable this for HL transport too.
Change-Id: I97551684224cf027beadb403ac2220fa355af986
CRs-Fixed: 2252391
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I606afc747cddedb524a41cd8e5998400f04e69f6
CRs-Fixed: 2191531
File wmi_unified_tlv.c is bloated and adding support for upcoming
Android Packet Filter v3 is going to increase its size even more.
Create a new source file for APF related WMI modules and a header
file for declaring the API's
Change-Id: I37dcc30c7d1311067f375c891be9723612161de9
CRs-Fixed: 2189827
Add support to configure logging buffer size from
per-OEM kbuild based on memory requirement.
Change-Id: Ia91d79e5e738b1c9787015de101c3f67ccde46aa
CRs-Fixed: 2253438
Add support to read the TWT services being advertised
by the target and make use of it internally in the host
at appropriate places
Change-Id: I3691622447271467d9276788574a2f2717928f83
CRs-Fixed: 2251389
In case PMO feature flag disable, add this change. Change
WLAN_PMO_ENABLE to WLAN_POWER_MANAGEMENT_OFFLOAD.
Change-Id: I875e568dcb239da1b86d1a76cb8cbc925bb13cde
CRs-Fixed: 2243948
Check capability of dbs, mcc and scc on single band when enable
AP+AP, then same driver code can support different chip and
firmware.
Add wmi_service_dual_beacon_on_single_mac_(mcc/scc)_support
Change-Id: I505747122504b2a89813e7bdfcd27dc07539f39e
CRs-Fixed: 2214237
Add support for ndp schedule update event and provide channel information
in ndp confirm event.
Change-Id: Ic2c073dd4f220627cc2bd1a2d52d858136b6b450
CRs-Fixed: 2180310
Add WMI support for building and sending the
WMI_TWT_ENABLE_CMDID to the firmware.
Change-Id: Ifbda4d1668e2bcb2e33d044269908e8d4c8333a5
CRs-Fixed: 2244214
Send average radar parameters to FW.
Extract host dfs spoof check status from FW.
Change-Id: I70c4e5aad0fe1eda55da37abd20cc6d70728edba
CRs-Fixed: 2211883
Address the following issues in the wmi folder:
CHECK: 'addres' may be misspelled - perhaps 'address'?
CHECK: 'COMAND' may be misspelled - perhaps 'COMMAND'?
CHECK: 'defintion' may be misspelled - perhaps 'definition'?
CHECK: 'happend' may be misspelled - perhaps 'happened'?
CHECK: 'managment' may be misspelled - perhaps 'management'?
CHECK: 'messsage' may be misspelled - perhaps 'message'?
CHECK: 'overriden' may be misspelled - perhaps 'overridden'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'refering' may be misspelled - perhaps 'referring'?
CHECK: 'refrence' may be misspelled - perhaps 'reference'?
CHECK: 'shrinked' may be misspelled - perhaps 'shrunk'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'succesful' may be misspelled - perhaps 'successful'?
Change-Id: Ie97e4d83cc88a2610524b38adc3474cdd31170d9
CRs-Fixed: 2241590
Add changes to support get congestion stats(arp stats) from
within cp_stats component.
Change-Id: Ic3b2f020c0169c9113c1b40738f782cbb3b8f6c5
CRs-Fixed: 2222781
Remove duplicate structs wmi_dual_mac_config and sir_dual_mac_config
and use policy_mgr_dual_mac_config.
Change-Id: I6da6539f519ec46ee274ba3f3ae042e5fd9c25d2
CRs-Fixed: 2191031
Number of AP TWT and AP TWT stations are added in
target_resource_config to provide the configuration for TWT.
Add support in WMI to provide appropriate defaults for TWT.
Change-Id: Ica91f981d59a015b0b4cda41ba951b6ba22e8120
CRs-Fixed: 2212667
Add get channel width from phy mode API which will be used by
ndp schedule update event.
Change-Id: I13d00c0b818eb0da434c8a5372b2ab7b6693f22a
CRs-Fixed: 2216801
When SWBA event is enabled, the FW will sent an event to the
host on every TBTT beacon.
Note that, unlike the legacy offload chips, this event is not
used by the host to send out the beacon frame itself.
Change-Id: Icf4440d79f7dbfb544f9d98c4de0e84bdb150459
CRs-Fixed: 2200805
Add ini "min_delay_btw_scans" to set minimum duration allowed between
two consecutive roam scans. Fw should not allow roam scan if duration
between two consecutive roam scan is less than min_delay_btw_scan.
Add ini "roam_trigger_reason_bitmask" to set default value of
bit-mask containing roam_trigger_reasons for which
min_delay_btw_scans constraints should be apply.
Pass value of min_delay_btw_scans and roam_trigger_reason_bitmask
to fw.
Change-Id: I2397467a13a720e763d1181d8cd50c571f861366
CRs-Fixed: 2221785
Add new ini item "enable_ftopen" to enable/disable
FT open feature. There is no ini currently to
disable only FT open.
Add sanity check to send 11r params in case of FT open
to fw only when enable_ftopen is enabled
Change-Id: Ifb27aea8de8c8837f8eda329e1247abfadabb628
CRs-Fixed: 2214772
Add new ini item "ho_delay_for_rx" to set delay Hand-off
period. For LFR 3.0 roaming scenario, once roam candidate
is found, firmware waits for minimum this much duration
to receive pending rx frames from current BSS before
switching to new channel for handoff to new AP.
Pass value of ho_delay_for_rx to fw in case of roam
offload.
Change-Id: I19141928a2885371bc1b9e7b720473d99c4ebb1d
CRs-Fixed: 2221755
qcacld-2.0 to qcacld-3.0 propagation
Discard the original wmi interface:
WMI_PEER_ANTDIV_INFO_REQ_CMDID/PEER_ANTDIV_INFO_EVENTID,
replace with the new one:
WMI_PDEV_DIV_GET_RSSI_ANTID_CMDID/WMI_PDEV_DIV_RSSI_ANTID_EVENTID
to support chain value along with corresponding antenna info.
Change-Id: Ie9ea9d160e1ac1e2e65de422c85989159fb5a556
CRs-Fixed: 2220759
Copy the file name to a QDF local array, rather than using
the pointer to file name, to avoid access to the invalid pointer.
Also, separate out SKB debug from memory debug.
SKB debug will be enabled once the SKB related false positives are fixed.
CRs-Fixed: 2216661
Change-Id: I0ada1acb84c24c961cf614c9c47261f272959874
The following changes are added for Tx capture/Mcopy mode
1. Append ppduid for FW generated mgmt. frames
2. Append ppduid received in mgmt. TX completion for host
generated mgmt. frames
3. Reuse nbuf received in HTT msg to send mgmt. payload to
upper layers
Change-Id: I073cafa6389ed1ed835cc3ba4b9421b7a4b97d7f
CRs-Fixed: 2185543
Fix memory allocation during NDP firmware events by allocating
memory before wmi_extract APIs are called.
Change-Id: I3af2f49895a79a45b3add246eeb9025b1df92faa
CRs-Fixed: 2183493
Add macros to set and get BSS color value and the BSS Color
disable bit values. These macros are used to construct the value
to send to the WMI BSS Color vdev param with BSS color and BSS color
disable status embedded.
Change-Id: Id0721a1a5d66fff5d2c50708aeefb5e0ec03e999
CRs-fixed: 2186897
