In cm_roam_btm_query_event, token and reason code is not
copied to wlan_log_record.
Add changes to copy token and reason code to wlan_log_record
in cm_roam_trigger_info_event.
Change-Id: I7e90017070edd61215eaea77fd3af22ae9465d83
CRs-Fixed: 3071239
Validity timer value is printed wrongly in logcat
logs for BTM request event. This is because the value
is filled from disassociation timer instead of the
validity timer field.
Also the neighbor report related prints are seen
only if the roam msg info TLV is present, which is
not correct.
Fill validity timer in BTM Request event and print the
neighbor report related prints on receiving 11kv
TLV.
Change-Id: I59606f27b0836ea567fed561bbe19f600377d3ed
CRs-Fixed: 3069855
Currently driver QCA_WLAN_VENDOR_ATTR_DIAG_BTM_TARGET_BSSID uses
instead of QCA_WLAN_VENDOR_ATTR_DIAG_BTM_TARGET_BSSID attribute
in the BTM response event. This causes the target bssid field to
be missed in BTM response print.
The WTC BTM response event is not queued when reason code is
non-zero.
Use QCA_WLAN_VENDOR_ATTR_DIAG_BTM_TARGET_BSSID attribute.
And queue the WTC btm response event.
Change-Id: Id713bfeda20c43148e95630f5c6e925b80418ca3
CRs-Fixed: 3071242
In cm_roam_trigger_info_event, fw_timestamp is not copied to
wlan_log_record.
Add changes to copy fw_timestamp to wlan_log_record in
cm_roam_trigger_info_event.
Change-Id: I8ec7796b656d716e6ab3b7613be0c1332d5c9fa0
CRs-Fixed: 3068843
Add self bss roam check in roam invoke cmd handler,
If ini enable_self_bss_roam is 0, don't permit to roam
to current connected bss, just keep current connection.
Change-Id: I7fe724e26d15bcc008957829e4e3384c60b58773
CRs-Fixed: 3069587
This change sends the new wow event in the bitmap to FW only
when the roam stats suspend mode attribute is enabled from the
user space.
Also, the new wow reason is added to wake up the host while
sending the roam event stats.
Change-Id: Iaefb229929e8791870f33bf787487f7c20daf218
CRs-Fixed: 3050830
In cm_roam_scan_info_event, qdf_mem_copy is performed with
different sizes.
Fix is to assign frequency values instead of mem copy.
Change-Id: Ie7dc4eaf4d7c0b65100edd77d7c2306e53e2ea9b
CRs-Fixed: 3065698
This change gathers the roam event stats from the FW.
New vendor event is used to fill in the vendor attributes
whenever the roam stats are received from Firmware.
Change-Id: I9a2ddef62d26b0b68897891788733df452ac1ceb
CRs-Fixed: 3036518
Add new vendor command to enable the roam events stats from the
driver/FW in both resume and suspend mode.
New roam param is introduced to indicate the FW to enable/disable
the roam stats using the new roam set command.
Change-Id: I6d04f0946e6735613a4cf3d4361bf31052314fa0
CRs-Fixed: 3036518
Update the concurrency policy for STA mode.
For an upcoming STA connection:
1. Disallow the 2nd STA connection if multiple STA connections are
not allowed.
2. Allow the secondary MLO link when primary link is connected.
3. Disallow ML STA when ML STA/SAP is present.
4. Disallow the 3rd STA.
5. Allow for the other cases.
Change-Id: I70c41177b7a3a9aa9cbac0aaced08c6eafca2b6d
CRs-Fixed: 3012577
If STA + STA concurrency is in DBS then irrespective of
primary interface configuration, DUT should meet below
expectations:
1. Roaming should get enabled on both the STAs interfaces.
2. Host should ensure that roaming bands are restricted to
maintain only DBS
Change-Id: Ib28cb232650893e46da0dd8e7d47d3876546a1a1
CRs-Fixed: 3056820
This change fixed compilation issue when defined macro
WLAN_FEATURE_CONNECTIVITY_LOGGING but no WLAN_FEATURE_ROAM_OFFLOAD.
Change-Id: I78f58c2bcfffb66ddf9390a8d724821faa90563c
CRs-Fixed: 3066954
For the WTC BTM roam trigger, BTM response is not printed.
So print the BTM response logs for WTC BTM frame also.
Change-Id: I679697ec08a42a862c251175261162bc95206d03
CRs-Fixed: 3062727
Along with 11BE feature macro, check for Kernel 11be macro to avoid
compilation issues when kernel doesn't support 11be.
Change-Id: I9fb84b6263cbdca4cde93e3a581acdbfe0fe2b34
CRs-Fixed: 3066175
While logging, scoring info freq param is not updated.
Fix is to add freq info in the log record sent to supplicant.
Change-Id: Id3c0d154e245376f494970c99589db0c3d37f7ac
CRs-Fixed: 3065693
When ADDROAMSCANFREQUENCIES is received, the specific channel
list is not flushed in the driver. This causes the static
channel list to be sent to firmware.
Flush the specific channel list when the ADDROAMSCANFREQUENCIES
command is received.
Change-Id: Id0422f9c5a4b10530fecc309a78cedf9adbc43af
CRs-Fixed: 3063734
Based on the new NCHO requirement, allow ADDROAMSCANFREQUENCIES to add
roam scan frequencies irrespective of the roam scan control value.
Change-Id: I5742f6d590e3ec51bfb294610ede05b1935a4790
CRs-Fixed: 3046763
Host sends the EXT CAP IE based on the capability
coming from the supplicant in join request. But, after
roaming the cached join request will be freed. Therefore,
after roaming few capabilities sent by the userspace are
not saved and therefore lost in reassoc request.
Save the EXT CAP IE from the join request in the VDEV
and use the cached capability for sending Ext cap IE.
Change-Id: I71947388b4c6e9e56a5832557416d9b462de70e2
CRs-Fixed: 3038496
Add support to send beacon miss disconnection logging event.
Fix the diag attribute end marker in the event table.
Change-Id: I11fc8859af383b69bcba42654fb3a2bc597fef83
CRs-Fixed: 3056266
As part of target if convergence, roam stats event handling
is moved to target if from wma. BTM request logs are not
sent in the new path.
Add support for BTM request logs in connection manager.
Change-Id: Icc66c5dc608260f2a0f75c5d1a85c799195f9f3e
CRs-Fixed: 3054987
When connect with assoc_ie has HS20_OUI_TYPE ie, hs_20_ap should
be set to true for using afterwards.
Change-Id: Id3003290473bdfa0adb0fc6471ae052e7944ab3d
CRs-Fixed: 3056979
For deauth/disassassociation RX/TX, the connectivity logging event
is sent. In this event the QCA_WLAN_VENDOR_ATTR_DIAG_STATUS_CODE,
is used to send the frame reason code. But userspace expects
QCA_WLAN_VENDOR_ATTR_DIAG_REASON_CODE attribute.
Fill QCA_WLAN_VENDOR_ATTR_DIAG_REASON_CODE instead of
QCA_WLAN_VENDOR_ATTR_DIAG_STATUS_CODE.
Change-Id: I90d58f251f0e2d4647cbde3c76d4a22779c97290
CRs-Fixed: 3054797
Roam result is printed as failure always since the
is_roam_successful flag is not passed to the
roam successful attribute to userspace. For roam
reason, the wrong attribute is used to convert the roam
sub reason from driver values to userspace values.
In WTC roam, the sub reason & vsie is not filled
from the right roam trigger TLV.
Fix the connectivity logging roam result and roam
subreason and WTC values passed to userspace.
Change-Id: Id276054868d907a801e87c1fd9cd7bb3b7c4e150
CRs-Fixed: 3051447
Currently driver always sets band value as REG_BAND_MASK_ALL
to roam set band which is incorrect.
Set correct band value from regulatory to roam set band.
Change-Id: I2cfb0c92e1eca549175135811d0122162281ba06
CRs-Fixed: 3050318
Currently, failure in csr_roam_synch_cb is not handled, therefore
failure during roam sync indication processing in CSR, leads to
out-of-sync between LIM and CSR sessions.
Handle the failure in csr_roam_synch_cb, by aborting the
roam complete notification to FW, and then process HO failure from
FW to cleanup LIM and CSR which will hold different BSSID profile.
Use vdev id instead of BSSID to retrieve/delete the LIM session.
Change-Id: I5ff2280e7ba1a8cb8e44c0c6b70647bf12b6ef31
CRs-Fixed: 3046370
Currently, southbound MLO disconnects are not handled properly because
the partner link is not being disconnected. To fix this, update
current calls to cm_disconnect to use mlo_disconnect instead, because it
can handle both legacy and MLO disconnections.
Change-Id: If908e2391290fd4a328f3d7d213c5ef6c1f5452c
CRs-fixed: 3029864
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: I6973d9c366ec6a9c6164dd19f6f4775dd3ebf5f0
CRs-Fixed: 3049942
After mac randomization, the change interface causes
the WTC mode to be reset as part of the hdd_init_station_mode()
Initialize the WTC mode during start modules as part
of the mlme component cfg values population.
Change-Id: I4a57c29053f0100c14cef067952d49cecbdc8ea5
CRs-Fixed: 3047594
During different SSID roaming the SSID maybe changed,
save ssid from beacon to roam sync ind struct and update
to mlme.
Change-Id: I83522334a2b86de13584ef4b5f55e6df68ec261a
CRs-Fixed: 3047205
In open mode, driver sends PCL list to firmware as part of STA
connection completes. To send the PCL list, driver checks whether
active session increases or not. But in current scenario, first
STA connection complete happens and then active session increases
which results no PCL list to firmware.
As part of fix, first increase the active session and then do STA
connection completes so that PCL list will be send to firmware
after successful STA connection in open mode.
Change-Id: Ie920aad7d1d693f04e5b4c13806ec09078ffd8c9
CRs-Fixed: 3042257
Fix few missing attribute in below connectivity events:
QCA_WLAN_VENDOR_DIAG_EVENT_TYPE_EAP_RESPONSE
QCA_WLAN_VENDOR_DIAG_EVENT_TYPE_ROAM_SCORE_CURR_AP
Also send the roam candidate info properly to userspace.
Change-Id: Ia9c4f095316adf8f40294f1e119cad648749bb72
CRs-Fixed: 3037650
As per new API changes, util_scan_get_ml_partner_info is modified to
pass the output pointer to ml partner info structure. Update caller
accordingly
Change-Id: I4da4a52a857eb147fe74f783136da71252e04444
CRs-Fixed: 3043820
During wma_pdev_hw_mode_transition_evt_handler()
get the freq range from mac_freq_mapping[] present in
wmi_pdev_hw_mode_transition_event_fixed_param and pass
till policy_mgr_hw_mode_transition_cb() and update
cur_mac_freq_range[MAX_MAC] from it. if no freq range
provided (legacy chipsets) then use
freq_range_caps[MODE_HW_MAX][MAX_MAC] to fill the
range depending on the new HW mode.
Change-Id: I145d48052ce37724b0f697c19a1041f5a908cb54
CRs-Fixed: 3044976
In STA+STA roaming case, when primary interface is changed
and roaming is enabled on other interface rso stop will be sent.
But the roam scan mode is not set to 0.
So add check for primary interface change to reset roam scan mode
before sending RSO stop to FW.
Change-Id: Ia880b58a57b3d9b74f3c4e100d4724aac46b67cd
CRs-Fixed: 3042416
STA connection with OWE transition mode SSID fails due to join
failure timeout. Since, it is OWE transition mode, STA needs probe
response for join success.
The scan table entry of the candidate BSSID is sent in the join request.
This entry is used to create session and to send probe request to AP.
In case of OWE transition mode, the beacon carries wildcard SSID.
Therefore, the scan table entry also has wildcard ssid. Also,
during the candidate selection, scm_ignore_ssid_check_for_owe check
allows even entries with wildcard SSIDs to be selected as candiates
for OWE transition mode.
The join request with Wildcard SSID in the scan entry is used by LIM
to create session, as well as to send probe request.Therefore,
the AP doesn't respond to the probe request with wildcard ssid
leading to join failure timeout.
This change adds ssid from connect request to the cm_vdev_join_req,
which can be used by LIM to create session and to send probe request
whenever the SSID in scan entry is wildcard.
Change-Id: I02e19e16f2620b5568fbff82ff29d394ab9ee00d
CRs-Fixed: 3041073
Add support to parse roam frame info TLV.
Add changes to send the BTM request logging event.
Change-Id: I24fab5fc0ec204fce74cf822742b5a44b0e7774f
CRs-Fixed: 3013489
When band is changed from dual-band to single band
(2G only):
1. host need to remove IDLE & BTC trigger bits from
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
2. Send WMI_ROAM_IDLE_CONFIG_CMDID with enable=0
When band is changed from single band (2G only) to
dual-band:
1. host need to add IDLE & BTC trigger bits from
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
2. Send WMI_ROAM_IDLE_CONFIG_CMDID with enable=1
and with default configurations.
To configure the above value in FW, send an RSO
update to FW whenever host receives set band command
from the upper layer.
Change-Id: I5a78deee713ff8514640d1867098e4045b77a231
CRs-Fixed: 3033081
Currently, reject_ap_info is used at many places and memset is
not done before filling it. memset the buffer to avoid reading
garbage values.
Also, modify the current initialization of ap_info in
cm_add_bssid_to_reject_list to memset.
Change-Id: Ic0fabc1733c4ea63dccb2e45b2a2dc37791e594d
CRs-Fixed: 3040299
Currently, the ROAM event is posted to scheduler thread when it's
received from firmware. This is done to avoid processing the
complete event in IRQ context as the same callback gets called
from IRQ context for WOW events(WOW_REASON_LOW_RSSI and
WOW_REASON_HO_FAIL). Posting the ROAM event to scheduler
thread may introduce some additional delay in processing it back
as there would be a context switch.
If this ROAM event carries ROAM_START which is followed by a
ROAM_SYNC event, there is chance to process the ROAM_SYNC
before ROAM_START as ROAM_SYNC would be processed in the same
context whereas ROAM_START needs a context switch. This results
into an invalid connection manager state after processing
ROAM_START event, which results a connection failure.
Same is applicable for ROAM_PMKID_REQ_EVENT and
ROAM_VDEV_DISCONNECT_EVENT. Avoid reposting the same to scheduler
thread.
Change-Id: Ic4fc1b3baf12e4ceee9a0975ebfee77fb88ab6f0
CRs-Fixed: 3033657
Add new files for connect/roam logging. Add changes to
initialize the logging buffer.
Make changes to support enqueue/dequeue log.
Define enums for MAIN_TAG, Sub TAG, category.
Add structure definitions for logging buffer.
Change-Id: I1d283fcf464da90d4f5533214d480ddda156ec27
CRs-Fixed: 3013486
Fix possible memory leak while updating dual sta connect channel list
in wlan_cm_dual_sta_roam_update_connect_channels.
Change-Id: I39dc05e485a0f00189978a38fa927a6ec4bd0086
CRs-Fixed: 3035192
Print channel list which is allowed for connection for the
second STA when dual sta roaming in is enabled in
wlan_cm_dual_sta_roam_update_connect_channels to enhance
debug log.
Change-Id: I4e16f101b60dc9d34d6193adcfe72ec173c5467a
CRs-Fixed: 3000235
Currently, firmware can roam between owe security SSID's
even though open SSID is different for both of the AP's.
This commit adds support to restrict roaming between the
same OWE profile AP's which means if the device needs to
roam then target AP's open SSID and owe SSID should match
with current AP.
Change-Id: Ib59127a90cab9ee6626b018d581edbf76ad89856
CRs-Fixed: 3025667
Send additional roam trigger TLV for BTC in
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
command, to support a new roaming trigger
"WMI_ROAM_TRIGGER_REASON_BTC".
Change-Id: Ib767bd6bcf005c187b0fb58986ad287fe8753c1b
CRs-Fixed: 3009788
To support BTC roaming, add a definition of BTC roam trigger
reason in ini roam_triggers. It goes to fw via roam_enable
trigger command (WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID)
Change-Id: I231a72ed98a74fb1b5ced12da7c3932af12d485d
CRs-Fixed: 3009787
When the connect request is pending on MLME and NB disconnect comes,
driver will wait for previous connect finish to process the disconnect
request. This delay the disconnect and may cause framework ANR.
Add code to fire the timeout event of active timers in various MLME
state. This will abort the connect request and get disconnect done fast.
Change-Id: I19cc03108c966c8f1efc0a554dfc59123dfe37f1
CRs-Fixed: 3026311
