On the initiator side, Host needs to send
WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID to firmware before sending the
PASN Auth frame. Hence, move send_set_mac_addr_rx_filter_cmd_tlv() from
wmi_unified_p2p_tlv.c to wmi_unified_tlv.c file.
Change-Id: Ia5517dbdd5ec46f611537b12b7046e3a9d859082
CRs-Fixed: 3304909
Currently host does not update band capability to fw as
part of feature set info.
With this change update band capability as well as part of
feature set info.
Change-Id: I09982f2f1b7b831a62f6f4db97691aeb4a4fb894
CRs-Fixed: 3303427
Based on the new requirement, fw fills the tx rate count and
rx count per mcs index in the peer extd stats event.
Add logic to parse tx rate count and rx rate count from peer
extd stats event.
Change-Id: I13382366f52964b83eb26473fa03267ac7309bb9
CRs-Fixed: 3289779
Currently if ENABLE_HOST_TO_TARGET_CONVERSION is defined, WMI_HOST_PEER_*
can be translated to WMI_PEER_* through API
convert_host_peer_param_id_to_target_id_tlv.
If ENABLE_HOST_TO_TARGET_CONVERSION is not defined, WMI_HOST_PEER_* in
common code is sent to firmware directly, which is incorrect.
Define WMI_HOST_PEER_* to WMI_PEER_* if ENABLE_HOST_TO_TARGET_CONVERSION
is not defined. Then WMI_HOST_PEER_* can be used in common code.
Change-Id: I50aa604d8822a81eed223c8551e542007929424e
CRs-Fixed: 3271470
Adding feature flag for Health Monitor so that it can be disabled
for 16M and 256M profiles
CRs-Fixed: 3277434
Change-Id: Ibbbe582acd15ebff7e189fcbaa36429ea519db37
FW-Host Handshake for BANG_RADAR_320_SUPPORT
1. FW advertises its capability of processing BANG_RADAR_320_SUPPORT
id via wmi service bit 'wmi_service_bang_radar_320_support'.
2. If the host is capable of processing the "BANG_RADAR_320_SUPPORT"
event id, host sends the capability in WMI_INIT_CMDID setting a bit in
host_service_flags
Change-Id: Ia26a7b8e8ee78aceb801d0053770379bd6d5a9cb
CRs-Fixed: 3270525
Update peer_chan_width_switch_info as per latest
fw common header file to include puncture parameter.
Change-Id: I1a68991ed8b9c653d31c4bc0c3ad3660d1104de3
CRs-Fixed: 3278709
Add API to extract MLD AP MSD capabilities from MLO IE
common info field if present. This will be shared with FW
via peer assoc cmd.
Change-Id: I0ebcd5408a40f3314932d4a2a7e586c208af2ee5
CRs-Fixed: 3271118
Remove unused param key_rsc_counter of set_key_param
structure, as key_rsc_ctr is used to send key rx sc
counter to fw and rename key_rsc_ctr to key_rsc_counter
as win is using key_rsc_counter.
Change-Id: Id58aabb30d772f8f620ac9f96890fcac0193777b
CRs-Fixed: 3256574
Currently host sends many vdev or pdev set param commands
separately to firmware.
Combine all vdev or pdev set params together where ever
possible, send to WMI.Based on service capability
WMI_SERVICE_COMBINED_SET_PARAM_SUPPORT, host decides whether
to send all set params to firmware at once to reduce number of
transactions or need to follow legacy way i.e send params
separately one after the other.
Change-Id: I0a36dd66a7ccb27f2ecd437cf7b9d08667e27472
CRs-Fixed: 3151418
Based on new requirement, driver needs to send feature set
information to fw as part of wmi init command.
With this change, fill the feature set info in feature set bitmap
and send this to fw with wmi init command.
Change-Id: Ic405c7e8e5ddd1399deacfaab240e979468c53c2
CRs-Fixed: 3262862
Call UMAC reset initialization API from soc_attach_target().
FW exposes a service bit for this feature, use that to conditionally
enable this feature. Also, add default log levels for this feature.
CRs-Fixed: 3253464
Change-Id: Ia7c9cf07a7ab7b000ebe452ab074a82173b70129
If found rx link speed change from good to poor, or poor to good, need send
to F/W. It may happen frequently. To avoid power side effect, send to F/W
by QMI instead of WMI.
Change-Id: I2e7ddd3ae539257c6b195cb13da221f886debbba
CRs-Fixed: 3255042
Extract EML and MLD Capabilities from Target via
wmi_service_ready_ext2_event. These values can be
used while advertising EML and MLD Capabilities.
Add helper function to get EML related delays in
Micro Secs from values got from EML and MLD advertisments.
Send EML Capabilities received from node to Target
via WMI_PEER_ASSOC.
CRs-Fixed: 3225495
Change-Id: Ibfa2ff8dbf11d4293125331376a7986e611d5f63
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the target SW to
indicate the different capabilities of the Spectral HW.
Add support to process this event and extract the capabilities.
Change-Id: I03b3236b6def98d24e77b2a9ea51ee866e62e6fe
CRs-Fixed: 3238450
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I21688093674ef9b63ee811df9168a31bd71c56b5
CRs-Fixed: 3239895
Rate-limiting will be based on number of beacons received.
When the beacon is not from connected AP, the beacons
are dropped on a percentage of received beacons and
rate limit, which is configured by the user.
CRs-Fixed: 3230508
Change-Id: Iac591c37129fda6923ef254c2950cb0bdbb44ce9
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID: Add support
for a new roam command to get vendor control parameters
from FW. Host needs to send proper param ID in command
(from enum WMI_ROAM_GET_VENDOR_CONTROL_PARAM_ID)
to get corresponding INI value from FW.
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_EVENTID:
Add support for a new roam event to get param value
from FW. FW sends this event upon receiving
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID command.
Change-Id: Ic7b3badb14daff183dd36927b4dae6bbc036e6cd
CRs-Fixed: 3225166
Add bt_coex active field in roam scan done info as
part of roam stats event handler.
Change-Id: Ief31efe491bede5ae4571bf0f5ace284aa6ea0fe
CRs-Fixed: 3226707
Add change to fetch and save the WMI service capability
bit of FW to support vendor handoff control feature
using service bit.
Change-Id: I6bc85f2807032bf84d391f34c814c91de906ab42
CRs-Fixed: 3225147
Enable bits in WMI_INIT command to let the FW know about host's
capability to support notify frame feature. If the feature is enabled,
host can mark certain TX frames as "notify frames" for hardware and they
need not be sent to FW. FW depends on this capability exchange to decide
whether to install HW rules for frames to be sent to HW.
Change-Id: I7158e79ae0fbdc73a2f4096ae1577337e8291246
CRs-Fixed: 3209399
This enables the option to configure when a peer's
TID queue needs to be flushed. This is required to
discard packets that are no longer useful to the application.
Change-Id: I558debff043fc0c8038e5f5f2c815b64c90e1561
CRs-Fixed: 3130422
Add eMLSR support for ML STA. It consists of 2 changes-
1) Since POLICY_MGR_HW_MODE_EMLSR_MODE_BITPOS macro has value of 32, a new
SET BIT function has been implemented to accommodate the 64-bit operation.
2) Add eMLSR related params to peer assoc mlo param struct to update FW
via peer assoc request.
Change-Id: I6e54c632677eacabc57338b0f159d97023b100f2
CRs-Fixed: 3185010
Add WMI command for tx peer filtering. This command is needed to send
the mac address to FW for which tx monitor peer filtering is needed
to be done.
Change-Id: Ia141fba81ba240b7f4ca015eb9251e3485294bb6
CRs-Fixed: 3199493
Send connected links bitmap to FW via a command:
WMI_REQUEST_STATS_EXT_CMDID in case of MLO connection.
Change-Id: I8ea88b0474769a56f5efa0cd006ba515e858accf
CRs-Fixed: 3149043
Critical update is the explicit signaling for STA to notify
any change in BSS param.
There are two categories of critical update params.
Category 1 elements: CSA, ECSA, Quiet, Quiet channel,
Max Ch Switch Time, that are directly included in
the per-STA profile of partner AP.
Category 2 elements: Except category 1 all operational IEs
HT/VHT/HE/EHT and WMM/EDCA/MUEDCA params.
Defined below vdev flags to track change in Category 1 and
Category 2 CU params per ML VDEV
WLAN_VDEV_OP_CU_CAT1: Change in category 1 param
WLAN_VDEV_OP_CU_CAT2: Change in category 2 param
Host notify to FW by updating current link CU param in
wmi_bcn_tmpl_ml_info TLV of BCN TMPL CMD.
Set the corresponding cu_vdev_map category 1 / category 2
based on change in critical update params of ML VDEV.
Change-Id: I8fe71309ab92a459524bdc5739f8b4a4a545562e
CRs-Fixed: 3199331
