Fix bug in calculation of number of link descriptor entries per bank,
which was causing memory corruptions.
Change-Id: I68a86b8c644a4ef48a45ad5c98b739dced68d81d
CRs-Fixed: 2057893
when we issue cat /proc/interrupts we see wlan_ahb for all
wlan interrupts, now replaced it with proper names to make
it easy to debug
Change-Id: Ib447cce7ffc2844b9f21f579aa50b6a1cfc2e001
Restart SAP with CSA/ECSA when ini variable gWlanMccToSccSwitchMod=3.
Currently ini variable setting gWlanMccToSccSwitchMod=2 was
causing SAP to restart with CSA.
Change-Id: I9a4b68cd154fa63325d146510832c2410f2dc244
CRs-Fixed: 2058567
Bitwise operation on different operands size may lead
to unexpected results, Typecast the constant to
the size of the variable while performing the bitwise
operation.
Change-Id: Ifd9939905cc9df22bb249fa9b1a6a9670cf5f113
CRs-fixed: 2047880
Add prints for all the references held by the components,
for an object, when the object is logically deleted.
The prints will be enabled only when the log
level is set to Debug.
Change-Id: If0a5b97a5e250fe1e5058611026c3c7ae8500359
CRs-Fixed: 2059750
Presently log level of DPTRACE prints is INFO due to
which they are coming in kmsg and causing watchdog bite.
Reduce log level of DPTRACE prints from INFO to DEBUG.
Change-Id: I0124dcc461d3e05541267c8310a43ea3ce0de9af
CRs-Fixed: 2043719
In populate_mac_phy_capability, bounds on an array are checked after
writing to the array. This leads to writing to one past the end of the
array under error conditions. Check the bounds of the array before,
rather than after, writing to it in populate_mac_phy_capability.
Change-Id: I34c7415b8fb925bea5a715214e3aa3ac8a4bacc8
CRs-Fixed: 2059155
Added support for wmi_service_chan_load_info which is newly
added in wmi service bitmap.
Change-Id: I95905ac95c5305f8f84ec512ecf1859955704193
CRs-Fixed: 2057719
Components are required to provide flush callback to scheduler which
gets invoked for all pending commands in scheduler queue when scheduler
thread is going down.
Added flush callback for scan so that command cleanup can be done.
Change-Id: I990a5e14db1498e13a2eeeaa605b44593b8442f1
CRs-Fixed: 2056542
Assert when there is a second registration for any of the psoc
pdev vdev & peer create/destroy handlers.
As seen in IR-224607, where there was a second registration
for psoc create handler which failed,
and the first one was already stored in psoc object,
and when psoc was trying to
call the first handler we see crash.
Change-Id: I7534c7cf2fb9d86329938dcf080362bc719ab582
CRs-Fixed: 2053892
In DFS component the prefix "ic_ " was being used to represent ieee80211
channel related variables. Now use prefix "dfs_ch_" instead of "ic_".
Change-Id: I2f739dc22ad89b7e410c06462876a22c2a615883
CRs-Fixed: 2056957
For Network Listen Offload and Perfered Network Offload, the fast scan
period is multiplied by scan_backoff_multiplier after max cycles have
occurred. Expose scan_backoff_multiplier to consumers of the WMI API,
so this parameter can be configured.
Change-Id: I478fb61cd096d3496205f4ff556e180dabf99b77
CRs-Fixed: 2035201
To fix the following compilation error:
warning: assignment discards ‘const’
qualifier from pointer target type, at:
reg_table->section = ar6320v2_reg_table
in ol_fw.c.
It's because the register table is a
const array, while reg_table->section does
not point to a const.
So add 'const' for 'section'.
Change-Id: Idfef358817241e73d660d2730b74c2ca88e23af1
CRs-Fixed: 2017786
Fix to update same enum wmi_scan_event_type types in switch statement
of extract_vdev_scan_ev_param_tlv()
Change-Id: I4817e57f2a9f309581392faadc1640c05d7fcf2b
CRs-Fixed: 2049514
Read the TAG type from the buffer and call the corresponding
TLV display function
CRs-Fixed: 1114641
Change-Id: Ifec04b87af84229754f598fffa689979ff253f12
The hif_napi_info structure has a dummy netdev included.
The dummy netdev is large. Avoiding unneeded allocation
save 30kb of memory. Dynamically allocating the
hif_napi_info structures also reduces the size of
the contiguous memory needed for the parent structure.
Change-Id: I58044e5b1d0a834b3b6d17f66d6f4b2462873f2a
CRs-Fixed: 2016355
Unlock the tso segment and tso common segment descriptor
pool if there are no descriptors available in the freelist.
Change-Id: I5c09e381769cdaa914e03ced24dccae8aea90897
CRs-Fixed: 2042950
Converged datapath currently uses a polling timer to check for pending
traffic. As part of suspend, pause the polling timer to avoid any
invalid accesses.
Change-Id: I6b4654c6737c08475443d021c04ba9385d084d74
CRs-Fixed: 2047505
Regulatory component needs to listen to vdev messages in order to track
whether a master mode vdev is getting created or destroyed. It is also
used to kick-start the state machine. Also re-run the state machine when
user-space country code is set.
Change-Id: I5112396314a936f84dad2f0e07329f9cb237aa78
CRs-Fixed: 2048784
Add support to send 11d scan start and stop commands to FW and
process the 11d new country update event from FW.
Change-Id: I5c1588cfb5af672cdb5738784de1bd0b83bdbe77
CRs-Fixed: 2048784
Currently Rx LDPC is disabled for STA(2G) connection due to
PHY-B hardware limitation. PHY-A can still support RxLDPC, so
make changes such a way that when ever STA is on 2G band and
current hardware mode is non-dbs then enable the Rx LDPC and if
STA is on 2G band and current hardware mode is dbs then disable the
RX LDPC.
Change-Id: Ib0183fea06619056c61e297d3fcfd82d91775dcd
CRs-Fixed: 2046542
Add a new target_psoc_info structure in the target if layer with the
following members
wmi_handle
target_type
target_version
target_revision
Also update the psoc data member tgt_if_handle to point to target_psoc_info
instead of pointing to WMI handle directly.
Updated all calls to psoc_get_tgt_if_handle to target_if_get_wmi_handle
which inturn calls psoc_get_tgt_if_handle and getting the tgt_if_handle
returns the WMI handle
CRs-Fixed: 2048277
Change-Id: Icb02d5f3c09f7f9bb7eff4d814ef3ce90ddb84bd
Scan command timeout value is 30secs and scan
cancel sync waiting time is 5sec due to this
in failure scenario scan timeout callback is
getting triggered very late and causing crash
in HDD.
Increase scan cancel sync timeout value equal to
scan command timeout value.
Change-Id: I7b98d26ac5d97039714a431030e47c463d3a670e
CRs-Fixed: 2048167
Replace all object manager qdf_prints with obj_mgr_err/obj_mgr_info
based on QDF_TRACE with the right log levels.
Added additional debug information like
Pdev_id
Vdev id
Peer MAC address
Change-Id: I96d96182176d332b9fbdb202305d29c08ddc0d18
CRs-Fixed: 2026537
Initial changes for adding dp trace in common framework. Modified dp_trace
record sturcture to include pdev_id as a member to take per_pdev stats.
Dump command has been modified to dump stats per pdev.
Change-Id: I8aede0bd8ab6f381c7fa0542d077bdd8bf66b3d2
CRs-fixed: 2038944
pdev_id is required to get the pdev object from utf event. Extract
pdev_id from the seg info within utf event's data stream.
Change-Id: Id8d3263a7f33d234c7cb43c99a0a44f28df5724d
CRs-Fixed: 2055128
Out of the list of scan channels passed by the application,
if the driver skips some channels, then the frequency list sent to
firmware was not correctly filled.
For example if supplicant passes channels 1, 6, 11 and we want to skip
1 and 6, then "req->scan_req.chan_list[0] = 0,
req->scan_req.chan_list[1] = 0 and req->scan_req.chan_list[2] = 11".
It should have been "req->scan_req.chan_list[0] = 11"
Fixes the same.
Change-Id: Idcef090169b8848c2576e620aa0fbe93918c219c
CRs-fixed: 2053866
Adds new vdev-mlme caps mask WLAN_VDEV_C_RESTRICT_OFFCHAN for
tracking restrict offchannel setting.
When this bit is set any operations which can cause the AP/GO
to leave the operating channel are avoided.
Also reads vdev-mlme caps:WLAN_VDEV_C_RESTRICT_OFFCHAN in function
policy_mgr_is_dnsc_set() to determine if Do_Not_Switch_Channel
is enabled.
Moves declaration of policy_mgr_is_dnsc_set() to
wlan_policy_mgr_api.h so that it can be used outside of policy manager.
Change-Id: I53013af5f4c72917f862630e63333951ec75ce8c
CRs-Fixed: 2050999
This commit defines an attribute to
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION -
QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL which can be used to
restrict offchannel operations on the AP/GO interface.
The goal is to restrict any operations which would cause the AP/GO to
leave its operating channel.
Change-Id: I88c2edb9456105068d0907b47dcd78cc09dc2428
CRs-Fixed: 2050999
There can be a race condition if the pktlog_buf inside pktlog APIs,
is accessed simultanously from two threads.
To prevent this use mutex in the caller functions of pktlog APIs.
Change-Id: Iea6e3cd28a7a347c1753fe71d0646fb43ee184fa
CRs-Fixed: 2047150
Recently, FW changes were implemented to support WMI resource config for
multi-radio. As part of this, the TBTT offset and SWBA events were modified
to support increase in the number of vdevs per SOC.
Brief description of the changes with respect to TBTT offset
------------------------------------------------------------
Converged FW will send extended TBTT offset event when the number of vdevs
configured is greater than 32 and will continue to send normal TBTT offset
event when the number of vdevs configured is less than 32. Legacy FW will
continue to send vdev map and tbttoffset list array as part of the TBTT
event.
Extraction API is added to extract the number of vdevs configured for both
legacy and converged FW. Number of vdevs is sent directly by the FW for
extended TBTT offset event but sent as vdev map for the normal TBTT offset
event. In order to handle normal TBTT offset event, extraction API for
normal TBTT event adds logic to convert vdev map into the number of vdevs
configured.
Extraction APIs are added to extract vdev id and tbttoffset information per
vdev that are configured. The vdev id information is sent as vdev map and
tbttoffset list as an array for normal TBTT event and as an array of
structures containing vdev id and tbttoffset in the case of extended TBTT
event. In order to support normal TBTT event based on num vdevs, extraction
API for normal TBTT eventadds logic to determine the vdev id from vdev map
based on the index(running through 1 to total number of vdevs) passed from
the driver.
Brief description of the changes with respect to SWBA
-----------------------------------------------------
Converged FW will send additional information num vdevs and vdev id
embedded in tim info and p2p noa TLVs for SWBA event. Legacy FW will
continue to send vdev map and array of tim info and p2p noa desciptors.
Extraction APIs is added to extract the number of vdevs configured for both
legacy and converged FW. Number of vdevs is sent directly by the FW for
SWBA event in the case of converged FW and as a vdev map in the legacy FW.
In order to handle legacy FW, extraction API for non-TLV adds logic
to convert vdev map into number of vdevs configured.
Extraction APIs are modified to extract newly embedded vdev id information
in tim info and p2p noa descriptors. The vdev id information is sent as
vdev map for legacy. In order to handle legacy FW, extraction API for
non-TLV adds logic to determing the vdev id from vdev map based on the
index (running through 1 to total number of vdevs) passed from the driver.
Change-Id: Ibf84adbb1c526321ec031d5539aff66dcbd1315b
CRs-Fixed: 2053628
Program the DMA ring configuration to firmware using
WMI_OEM_DMA_RING_CFG_REQ_CMDID.
Change-Id: I99e5b3a369d7eeee1d1fe41782285ed54cdb82cf
CRs-Fixed: 2053958
Add handling of indirect data in WMI_OEM_RESPONSE_EVENTID.
This data then needs to be sent to userspace app.
Change-Id: Id1661f23ff000b33da9640cc44ea7be25e9f8dc0
CRs-Fixed: 2053958
Remove action frame type of presence response since parse incorrect,
Support category vendor specific action frame.
Change-Id: I7c75ed91dc14496d682cd9ce2065589271a1b71b
CRs-Fixed: 2039615
A previous change included a workaround for HDD sending an invalid
vdev_id to PMO during NS/ARP configuration. Since the original HDD
issue has been resolved, remove the workaround in PMO.
Change-Id: I9507fd40e25943cfb855419687a1857bdda7331f
CRs-Fixed: 2051314
