Add a new vendor command to trigger computation of connected channel
statistics such as channel utilization in STA mode.
Change-Id: I868a85bbbee9f9b050636789c3d7217b71164852
CRs-Fixed: 3460890
Add a new vendor command QCA_NL80211_VENDOR_SUBCMD_GET_MONITOR_MODE to
get the local packet capture status in the monitor mode. Add required
attributes to respond with status of the monitor mode. The monitor mode
can be started/configured by using the
QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE subcommand.
Change-Id: I72edd46f85b545d7aecb3c704441e810db9ca711
CRs-Fixed: 3415711
Add a new vendor command and attributes to control and fetch the state
information of the MLO links affiliated with a specific interface.
This will enable user space to dynamically control the MLO links states
based on the latency, throughput and power save requirements.
Change-Id: I1ef710a6f3a1f8723bb3d1c564c0c803bfa0b587
CRs-Fixed: 3416250
Add QCA_WLAN_VENDOR_MCC_QUOTA_TYPE_LOW_LATENCY attribute
to enable/disable Multi-Channel concurrency low latency mode.
The firmware will do optimization of channel time quota for
low latency in Multi-Channel concurrency state if enabled.
Change-Id: Ibcf1ac82b2650899043ea9b61be5e1501e2d85a1
CRs-Fixed: 3409648
Add new QCA vendor attributes to configure the driver for EHT
capabilities and multi-link configuration.
Change-Id: I322a6fe112b83b3636c9383db152bfaa5dd34c14
CRs-Fixed: 3395113
Add new QCA vendor attributes to configure the driver for EHT
capabilities. These attributes are used for testing purposes.
Change-Id: Ic4ea6f5be212da423181d108c8dcae559a08a47e
CRs-Fixed: 3271502
During implementation of commit 257b119c2d87 ("QCA vendor attribute of
update roaming cached statistics info") some deficiencies were noted as
listed below, so fix them. Since these are pre-implementation changes,
no ABI breakage is introduced.
1) Change all RSSI values to be signed values.
2) Add enums for scan type and dwell type instead of documenting
their values with comments
3) Add missing QCA_ROAM_REASON_STA_KICKOUT to enum qca_roam_reason
Change-Id: I270dc1a009e36e37c83cb6298a096ed91b511df1
CRs-Fixed: 3402978
Add new AP concurrency policy QCA_WLAN_CONCURRENT_AP_POLICY_XR to
configure interface for eXtended Reality (XR) requirements.
Change-Id: I514979a9d950de9e0181dbf6d285812ef8a05126
CRs-Fixed: 3401504
Add vendor subcmd QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS and attribute id
in enum qca_wlan_vendor_attr_roam_cached_stats for collecting roaming
statistics information when diagnosing roaming behavior.
Change-Id: I38fa39c2524e453335cf8281afe403a7c64c8bb4
CRs-Fixed: 3381257
Add more hang reason codes for the hang reason in the
qca_wlan_vendor_hang_reason enum.
Change-Id: Ia7f21c45d58c980219690cda390127f5d4004391
CRs-Fixed: 3380849
Add new attributes for the destination MAC address and netdev index in
SCS rule config subcommand.
Change-Id: I8298d9e0080440fce7401fb931e1af42672711cf
CRs-Fixed: 3359591
Wi-Fi Alliance specification for Automated Frequency Coordination (AFC)
system ensures that the Standard Power Wi-Fi devices can operate in 6
GHz spectrum under favorable conditions, without any interference with
the incumbent devices.
Add support for vendor command/events and corresponding
attributes to define the interface for exchanging AFC requests and
responses between the driver and a userspace application.
Change-Id: I8c894236cdb3a33f6eae5dd43879fc84f29a80dd
CRs-Fixed: 3337619
Add a new subcommand QCA_NL80211_VENDOR_SUBCMD_DOZED_AP to configure
doze mode state on an AP interface. This is also used as an event to
indicate the updated configuration. In doze mode, AP transmits
beacons at higher beacon intervals and RX is disabled.
Uses attributes defined in enum qca_wlan_vendor_attr_dozed_ap.
Change-Id: I183140f0466eb7400cc161afb8c2e295ec587f93
CRs-Fixed: 3267855
During the roam scan, if there are no desired APs found in the partial
frequency list, an immediate full scan on all the supported frequencies
is initiated as a fallback. This would include the 6 GHz PSC
frequencies. Define an attribute to allow that behavior to be modified
to include PSCs only if 6 GHz use has been detected.
Change-Id: I81eb9b20c2953e6b0dbf4138b31547db82d7397f
CRs-Fixed: 3351706
Add QCA_WLAN_VENDOR_ATTR_CONFIG_WFC_STATE vendor attribute,
Userspace uses this attribute to configure wfc state to
Driver/Firmware. Driver/Firmware uses this information to
optimize power savings, rate adaption, roaming, etc.
Change-Id: If58bd1e64216de81af6cf82eaabd740b85729eac
CRs-Fixed: 3343034
During the roam scan, if there are no desired APs found in the partial
frequency list, an immediate full scan on all the supported frequencies
is initiated as a fallback. This flag controls the frequency list
creation for full scan on the following lines.
1 - Full scan to exclude the frequencies that were already scanned by
the previous partial scan.
0 - Full scan to include all the supported frequencies irrespective of
the ones already scanned by partial scan.
Change-Id: Id48ae28e6d0e719b9db9b2e73bd76f9be1ea0b3e
CRs-Fixed: 3343567
Introduce a new attribute to configure access category
override for UDP frames of BE/BK category. Unlike, the
earlier attribute QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE
which will override for all UDP frames, this attribute is
for overriding only for BE/BK based UDP frames.
CRs-Fixed: 3332609
Change-Id: Ife6104b97bca83653fdcac31f2c91007d1aa6f2a
Introduce a run time roam configuration for "hand off delay for RX".
This value, in milliseconds, will delay the hand off for the specified
time to receive pending RX frames from the current BSS.
Change-Id: I961109a2f9287a611ae8f4b38e2ea824ecf9c559
CRs-Fixed: 3329952
Add a new vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_MLO_PEER_PRIM_NETDEV_EVENT to send notification
to application layer about primary netdev of an MLO peer association.
Also define the attributes present in this subcommand.
Change-Id: I84ba177c5d7155f627d4d3fa86c64c4f9b24951c
CRs-Fixed: 3280634
Add a new QCA vendor attribute to configure the periodic sounding for Tx
beamformer functionality.
Change-Id: I2f36f98b6665d448c07d676ff9a5fa907a980c5c
CRs-Fixed: 3328364
Add support for new vendor sub-command attributes for 320 MHz
channel width and puncturing information as part of the
external ACS.
Change-Id: Ic8181619949061794775bfe55f4afd0f408a7316
CRs-Fixed: 3323216
Add a new QCA vendor attribute
QCA_WLAN_VENDOR_ATTR_CONCURRENT_POLICY_AP_CONFIG to
QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_POLICY sub command to set
the concurrency policy for AP interface.
QCA_WLAN_VENDOR_ATTR_CONCURRENT_POLICY_AP_CONFIG uses the values
defined in enum qca_wlan_concurrent_ap_policy_config to specify
concurrency policy.
Change-Id: I73931e41e469b3696f80fe8897428d4fc796ec95
CRs-Fixed: 3302865
Rename QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_MULTI_STA_POLICY to
QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_POLICY to allow extension
for other interface type(s). A subsequent commit will extend the
renamed definitions in a manner that is inconsistent with the
current naming.
This is a precursor for AP/P2P concurrency policy configuration
support via updated vendor command
QCA_NL80211_VENDOR_SUBCMD_CONCURRENT_POLICY.
Change-Id: I1df8e7b289a8d7f1982f5daab732a36ad013d9ca
CRs-Fixed: 3302835
Add service class id attribute
QCA_WLAN_VENDOR_ATTR_SCS_RULE_CONFIG_SERVICE_CLASS_ID in SCS rule
configuration vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_SCS_RULE_CONFIG.
Change-Id: I1a1be0a1a5c65be488e36c0d078dbc6aef47838a
CRs-Fixed: 3314058
Add a new vendor sub-command to implement Spatial Reuse feature.
Userspace enables SR feature with specific configuration parameters. The
driver/firmware upon receiving the command, enables the SR feature if it
is supported by the currently connected AP. The driver may reject the
command if it cannot enable the SR with the configured parameters. The
driver sends events to userspace to indicate when SR feature is enabled
or disabled internally. Userspace can also query SR feature related
parameters and statistics from the driver/firmware as needed.
Change-Id: Ie203576d4ace691e37a1c5eea379f562bf416835
CRs-Fixed: 3298975
Add a new attribute QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_SP_START_OFFSET to
configure offset to shift start of the service period. This attribute
will be used when device supports flexible TWT. If provided, this
attribute will override QCA_WLAN_VENDOR_ATTR_TWT_NUDGE_WAKE_TIME.
Change-Id: I1f066f328c6d0f3ca4d4bf4a94e63647d639f49d
CRs-Fixed: 3299714
Fx the following compiler error:
qca-vendor.h:5892:54: error: result of ‘1 << 31’ requires 33 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]
5892 | QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HE40INTOL = 1 << 31,
This "1" needs to be marked unsigned for this case of MSB=1.
Change-Id: I27daebd07d0cbf314459254cfc5906f5e56dd4be
CRs-Fixed: 3299457
Add a new QCA vendor attribute to configure the periodic sounding for Tx
beamformer functionality.
Change-Id: Id4b75e992e22facdc58b467aaed29d9b00901fad
CRs-Fixed: 3290371
Based on the new requirement process tx and rx rate counts
from peer stats response and send these stats to user space
as part of big data stats.
Change-Id: I988f0d6cf6a3537f31433d4f57280336ab58bc38
CRs-Fixed: 3289789
Add QCA_NL80211_VENDOR_SUBCMD_GET_SAR_CAPABILITY to get various SAR
capabilities supported by the WLAN firmware to userspace. These
capabilities are usually reported by the firmware during the initial
bootup handshake with the driver. Based on these capabilities, user
space can choose proper SAR indexes.
Change-Id: I31be4bd58dc02fe82ae57f703f7db54f5a3c027e
CRs-Fixed: 3274703
Enhance QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH event for the
driver to indicate the information of the associated links of MLO
roaming.
Change-Id: I5cede840ec42bb45ec13e35a1f5caa0c0674047a
CRs-Fixed: 3278009
Previously when chains of BT and WLAN 2.4 GHz are separated,
hybrid mode will be used for BTC. Now adding fixed FDD mode
to fulfill different BTC scenarios.
Change-Id: I8f415ae65160977df478c9bd908e9429d69103c3
CRs-Fixed: 3247146
Add QCA_ATTR_ROAM_CONTROL_RX_LINKSPEED_THRESHOLD value as the RX link
speed threshold to disable roaming. If the current link speed is above
the threshold, there is no need to roam.
Change-Id: Ifeeacfa9d49de76c28fe968c1eb26b5036261c9a
CRs-Fixed: 3200264
Add vendor command QCA_NL80211_VENDOR_SUBCMD_COAP_OFFLOAD to
enable/disable offload processing in firmware for CoAP messages
(RFC7252: The Constrained Application Protocol) or fetch the
CoAP messages cached during offload processing.
Change-Id: I2eaeba58ec6bc44738f68eb00c36ebdce2eae6f8
CRs-Fixed: 3193633
Add the following two vendor attributes to send TIM beacon
statistics to userspace which can be used for power saving:
QCA_WLAN_VENDOR_ATTR_LL_STATS_TIM_BEACON
QCA_WLAN_VENDOR_ATTR_LL_STATS_TIM_BEACON_ERR
Change-Id: I2986d7e573ed7eaf72a620b928daceccc43b9066
CRs-Fixed: 3234924
Add a new vendor subcommand QCA_NL80211_VENDOR_SUBCMD_SCS_RULE_CONFIG
for configuration event of Stream Classification Service (SCS) rule.
Also define the attributes present in this subcommand.
Change-Id: Idab722532f9870a377e5f1c02185bdfe2ccb39eb
CRs-Fixed: 3226253
Add a new QCA attribute QCA_WLAN_VENDOR_ATTR_CONFIG_DBAM
to configure Dedicated Bluetooth Antenna Mode (DBAM) feature.
It is used to switch between dedicated antenna mode for BT and
COEX shared antenna mode for WLAN and BT.
Change-Id: Id1e04e8647a0b4ff6bb83f272c0f891aa88f111c
CRs-Fixed: 3239894
Add feature capability indication for P802.11az security for the drivers
to advertise capabilities such as secure LTF support, secure RTT
measurement exchange support, and protection of range negotiation and
measurement management frames for station and AP interfaces
independently. This allows a more fine-tuned capability indication as an
alternative to the upstream nl80211 mechanism that is not specific to
the operating mode.
Change-Id: I53073fec66abf38986038ab9e4d17531ddd67b5a
CRs-Fixed: 3235149
Define QCA vendor interface for PASN offload to userspace from the driver.
The driver can send this command as an event to a userspace component to
perform PASN authentication with a list of peers with which the driver
needs to do ranging. The userspace component, if capable of performing
PASN handshake, can perform PASN handshake with all the peer devices and
set the relevant keys by sending the
QCA_NL80211_VENDOR_SUBCMD_SECURE_RANGING_CONTEXT command for each peer
to the driver.
Once PASN handshake is completed with all requested peers, the userspace
component sends consolidated status for all the peers to the driver. The
consolidated report is required for the driver to understand that the
PASN handshake process is complete and whether it succeeded/failed for
each of the peers it was requested for. The secure ranging context is
configured only for the peers with which the PASN handshake succeeded.
When the driver requests PASN keys, the userspace component can set the
keys from its cache if those keys have not already expired and were
derived with the same source MAC address that is requested by the driver
instead of doing the full PASN handshake again.
If the driver detects that current keys of a peer are not valid anymore,
it sends a notification to userspace using the
QCA_NL80211_VENDOR_SUBCMD_PASN command and setting the action to
QCA_WLAN_VENDOR_PASN_ACTION_DELETE_SECURE_RANGING_CONTEXT. The userspace
component should delete the corresponding keys from its cache.
Change-Id: Ib6e2c7baf7728dacf0303513c5a41412dae40b8b
CRs-Fixed: 3224160
Vendor command to get the WLAN radio combinations matrix supported by
the device which provides the device simultaneous radio configurations
such as standalone, dual band simultaneous, and single band
simultaneous.
Change-Id: Ic3fb07ede1b716a08c476292446dae3d6ad73ee5
CRs-Fixed: 3214052
Add a new QCA vendor attribute
QCA_WLAN_VENDOR_ATTR_ACS_LAST_SCAN_AGEOUT_TIME to
QCA_NL80211_VENDOR_SUBCMD_DO_ACS and opportunistically optimize time
taken for ACS scan. Avoid scanning the channels which were scanned
within last QCA_WLAN_VENDOR_ATTR_ACS_LAST_SCAN_AGEOUT_TIME milliseconds
and use scan results from scan results cache for ACS scoring. For other
channels, perform ACS scan and use the received scan results.
Change-Id: I5f57002566870fea7444358711205392e5e84053
CRs-Fixed: 3226134
Add QCA vendor event to indicate user space that the driver
recovery is completed after the internal failure.
Change-Id: Ib65c9773dd64fab36ba10493c27bd670c2bb6d08
CRs-Fixed: 3226415
Add attributes to indicate reassociation request and response events from
driver/firmware.
Introduce new attribute for Association ID.
Add support to listen for BT Coex for SCAN DONE diag event.
Change-Id: Ieedd0d154cd3287aca23c03ca573b87e8127726e
CRs-Fixed: 3221625
Add QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_11BE_EMLSR_MODE
value to allow or disallow eMLSR hardware mode for 802.11be
MLO capable devices. If this attribute is set to 1, and if
the FW supports this capability too, then the STA host
advertises this capability to AP over assoc request frame.
This attribute will not have any effect on legacy devices
with no 802.11be support.
Reference - https://w1.fi/cgit/hostap/commit/
?id=563162a5f521965e582acc32d7ce3034fa8fb32e
Change-Id: I4ae2cbbc6adcfef8fbc225bef60b3597771786f7
CRs-Fixed: 3185027
Extend the peer queue flush command with following attributes
1. Enable to flush per TID peer queue
2. Enable to configure when to flush the peer/TID queue
Change-Id: I1c8a9ca82cdfdd67eaf69b73a8a7076ca9c02dab
CRs-Fixed: 3130761
This change is to vendor attribute for peer TID flush vendor
cmd QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING.
Change-Id: If112ec288a64622b9bf7fe625f7ac9e127d0ecbe
CRs-Fixed: 3170381
Add support to reset eLNA bypass configuration to default behavior.
If value of 2 is configured, the driver can choose either to
disable/enable eLNA bypass control and there is no enforcement
from userspace.
Change-Id: I813abe5beda49e394ff381aae57c78069ca28784
CRs-Fixed: 3172147
Add a QCA_WLAN_VENDOR_FEATURE_USE_ADD_DEL_VIRTUAL_INTF_FOR_NDI
flag to indicate that the driver requires add/del virtual interface
path using the generic nl80211 commands for NDP interface create/delete
and to register/unregister of netdev instead of creating/deleting
the NDP interface using vendor commands.
With the latest Linux kernel (5.12 version onward), interface
creation/deletion is not allowed using vendor commands as it leads to a
deadlock while acquiring the RTNL_LOCK during the register/unregister of
netdev. Create and delete NDP interface using NL80211_CMD_NEW_INTERFACE
and NL80211_CMD_DEL_INTERFACE commands respectively if the driver
advertises this capability.
Change-Id: Icb1782b147cf7ef7fed7bb4ba28ece23d4b0dc21
CRs-Fixed: 3167119
