If SAR version 2 is not supported by firmware, then fallback to
default SAR version 1
Change-Id: Ibfbcfd7cf3f438f7cb46250c70221956ea54c7ca
CRs-Fixed: 2274447
When disconnect happens, TDLS_NOTIFY_STA_DISCONNECTION will be
send to scheduler_thread, in bad case, it is processed after
3s later, and the vdev passed in notify msg has been freed in
the period, invalid vdev causes invalid memory access.
change as below:
1.1 Get vdev ref before send msg
1.2 register callback for release ref
1.3 send msg to scheduler_thread
1.4 process tdls notify msg and call callback function.
Change-Id: I2b03db8b30db623796f2e8299f14ee31e28efb91
CRs-Fixed: 2275019
Removed qdf exports on functions defined in target specific
header files and defined those functions as static. Revert
changes on hal_rx_msdu_end_sa_idx_get and make
hal_rx_msdu_end_da_idx_get target specific
Change-Id: I2858b1d77118f0a26b54bf983bd342c7a4fe757d
implement qca6390 target specific hal_rx_msdu_end_sa_idx_get,
hal_rx_dump_msdu_end_tlv as these routines differs a bit from
rest of the lithium chipsets. this target specific function
will be called through callbacks
Change-Id: I4b71da2d39217c2920597fb36c936218359e6c3a
make hal_rx_msdu_end_sa_idx_get and hal_rx_dump_msdu_end_tlv
routines target specific as qca6390 implementation differs
a bit. add target specific functions for qca6290 and qca8074
Change-Id: Ie05b91d965bae3642e3264620c6d8427ad368044
hal_hw_srng table and register offsets array, some target specific
functions are defined separately for each new target.
define the same for qca6290.
Change-Id: I08c1243bc50460fac776e28186acfa192fb1ff66
macros and fw cmn headers included in hal_internal.h is moved
to a new hal_hw_headers.h to avoid these getting included in hif
layer. Include the new hal_hw_headers.h file
Change-Id: I3390ae9e71ca561d94a265e1fdf4d9354e7b2474
This change will help to have pld and non-based based chipset
to work on the same WIN AP platform.
Change-Id: I778cf0d548f5a8575cd6a4fcc76afd0043e5942b
Create separate individual hal_srng_table and hal register
offset in target specific source files. Create separate
functions for qca6290 and qca8074 for few hal rx tx
functions as the macro value differs between the chipsets.
Assign target specific hal tx, rx ops as part of hal_attach
and call respective hal tx, rx ops through callbacks.
Change-Id: Ibbf490c678c39fdd9d54191aad7aaec786db30ec
The extscan unified data structures were duplicated from legacy
qcacld-3.0 data structures. As part of the duplication process some
things were inherited that are not appropriate in the unified WMI
including camelCase identifiers and the use of "session id" as an
instance identifier. Due to the fact that multiple repos are affected
a multi-phase cleanup is proposed in order to avoid cross-repo
inter-dependent commits.
For phase 1 (this change):
For each inappropriate identifier introduce an anonymous union which
will contain both the badly named identifier and a properly named
substitute.
Subsequent changes will address the following phases:
For phase 2:
Replace all references of the badly named identifiers with references
to the properly named substitutes. Note that this phase may touch
multiple repos and may involve a number of separate changes.
For phase 3:
Once phase 2 completes, remove the unions introduced in phase 1,
leaving just the properly named replacement identifiers.
For phase 4:
Update the legacy code to exclusively use the converged data
structures, abandoning the legacy data structures.
Change-Id: I11800361b572331cfada00fb7d518c314df20b43
CRs-Fixed: 2280645
Drop the timeout to 5 sec on hastings as it is a 2x2 DBS solution,
as IOT issues due to frequent 2x2 to 1x1 or 1x1 to 2x2 transition
can be avoided.
Change-Id: I67f9c97a7190baeadba79d709a8773b154932e76
CRs-Fixed: 2281954
Repeater AP failed to associate to Root AP with
hidden ssid in DFS channel.
Normally probe request is sent in passive channels if beacon
from AP is found. With strict passive scan, probe request is
not sent in passive channels even after beacon is found in that
channel.
If AP is configured in hidden ssid, Client/STA does not get the
Probe Response and thus, no SSID information is present in the
scan table to start authentication.
To overcome this, user needs to set the desired {BSSID, SSID} pair,
Example: Desired pair = {00:03:7F:AA:BB:CC, MOON1},
so that when driver receives a beacon it compares the
BSSID and updates the SSID field to update the scan table.
In general, we already set the ssid in sta configuration
But in this case, we also need to configure BSSID of the hidden AP.
This can be configured through iwpriv cmd.
Example: iwpriv athx conf_bssid 11:03:7F:46:03:17
Change-Id: I03e1efed1168c911fc8f6358d6ad8a8c0b40ba61
CRs-Fixed: 2274105
The command eSmeCommandDelStaSession issues vdev delete to
firmware. As this command eSmeCommandDelStaSession is not
serialized, this may issue delete vdev before the peers for the
vdev are deleted, resulting in fw assert. Serialization
should be brought in for this command, so that first
eSmeCommandRoam command will do
vdev_stop-->remove_peer-->vdev_down and eSmeCommandDelStaSession
will be processed which will send vdev delete.
Post the command eSmeCommandDelStaSession to the serialization
module and WMA_DEL_STA_SELF_REQ will be posted from the sme
eSmeCommandDelStaSession handler.
Change-Id: I08f5db2d5034a29cd65929d218bf97b464447077
CRs-Fixed: 2280865
In current implementation, wait_queue is used for waiting on WMI ready
event, it is now changed to event mechanism
Change-Id: I08b4f088874b7c63e20b129f14dbac01851496e5
CRs-Fixed: 2276900
As part of the effort to reduce overly verbose and excessive logging
driver wide, reduce or remove logs in scheduler as much as possible.
Change-Id: I1e45c439315e81d9ff05e1688fe690d0ca30e097
CRs-Fixed: 2280337
Add cfg API's to parse different global
and psoc INI files, but store to the same
global or psoc store as required.
Change-Id: I588f47bc61094640ddfe4b29712ca978908f2844
CRs-Fixed: 2278934
Pass offset value to the Firmware to support split scanning
of total dwell time in smaller chunks. Offset passed is
calculated from TBTT.
Change-Id: I8114acd1147d468aa6471f672307d8ea0ec8611d
CRs-Fixed: 2134748
OL_ATH_PARAM_CBS - Command to enable/disable CBS
OL_ATH_PARAM_DCS_SIM - Command to simulate DCS interferences
OL_ATH_PARAM_CBS_DWELL_SPLIT_TIME - Command to configure
Dwell Split time
OL_ATH_PARAM_CBS_DWELL_REST_TIME - Command to configure
Dwell Rest time
OL_ATH_PARAM_CBS_WAIT_TIME - Command to configure CBS wait time.
OL_ATH_PARAM_CBS_CSA - Command to enable channel switch with CBS.
Change-Id: If1c45c7caa53da7f05e56f23c74cf1b982ea8f48
CRs-Fixed: 2134748
The driver includes the DFS channel in case of force SCC,
on 5GHz band, and rejects all 2.4Ghz band channels in the
ACS scan list in case of band_width > 40. The DFS SCC not
allowed till date prevents the SAP vdev up on that DFS channel,
hence the SAP turns on with default channel of 2.4 Ghz i.e
channel 1, because the ACS scan channel list didn't contain
any 2.4Ghz channel.
Fix is to include the 2.4Ghz channel list, and remove that DFS
channel in case the force SCC is enabled, and STA is already up
on that channel.
Change-Id: I1dc14d3890d8128e83910c2bed1cb95d7f70ea1c
CRs-Fixed: 2261802
Account for tx.success and tx.comp_pkt stats counters
at peer level and propagate them to pdev level.
NSS stats need to be updated for all packets.
Change-Id: I18de95217690c9234060253671e0d5e1ef295e2a
CRs-Fixed: 2270816
Add cdp ops for timestamp setter/getter function for peer based on
mac address.
Change-Id: I7025fdd7540f47bb4d3f95ef6d9f2ef92af5f1f1
CRs-Fixed: 2275985
Add following scan CFG items to common scan component
1.CFG_ACTIVE_MAX_CHANNEL_TIME:Max active dwell time
2.CFG_PASSIVE_MAX_CHANNEL_TIME:Max passive dwell time
Change-Id: I3aeed28a404984812ebbc56f2a8d28e7e9ab7de2
CRs-Fixed: 2277105
Currently, the macro type and the "is an ini" value information are
clubbed to together in the cfg component. This lead to not being able to
use the macro type with non-ini configuration values. Split macro type
and "is an ini" value information in the cfg component so that
cfg_in_range can be used with non-ini configuration values.
Change-Id: If63f222cf21a45f0d7d3809f1be845ecc2b2cd65
CRs-Fixed: 2278656
Currently the host sends the fixed gtk offload params
and the FILS TLV params, even when the FILS feature is disabled
in the host, which force firmware to pick the KEK from the
FILS TLV structure rather than from the fixed param structure,
which further leads to GTK re-keying feature fail.
Fix is to send only the fixed params in case when host doesnt
supports FILS.
Change-Id: I53a77257e716bf290a6f4bd62927020f073e2df6
CRs-Fixed: 2275938
AST entry has been allocated at the time of peer creation at DP.
But during peer delete it is not deleted. This leads to memory leak
in the wlan driver. To fix this delete ast entry at the time of
peer deletion.
Change-Id: I8d16b575bd44bf06415c3b1cc44c1c7833c88137
CRs-Fixed: 2273601
As per the updated spec, 11AX PPDU's HE SIG_A data-5 field has added
LTF symbol field which is 3bits in size.
Add logic to parse the TLV coming from hardware and update the
LTF symbol value.
Change-Id: I05e2ff8ece7e14dc22ce747e9a9b906bf130462f
CRs-Fixed: 2235233
For logic that builds on top of QDF_DEBUG_PANIC(), it would be useful to
be able to specify function and line number explicitly. Add
QDF_DEBUG_PANIC_FL(), which is QDF_DEBUG_PANIC with explicit function
and line number parameters.
Change-Id: Idc79f2fb0e769930167766f21a54a82c4b7ff40a
CRs-Fixed: 2276964
Assign DMA address correctly to all scatterlist elements of scatter
gather table in qdf_mem_shared_mem_alloc() func.
Change-Id: I07988d0bc35e3e0fcf7b9f6df02a9e56a0e8b083
CRS-Fixed: 2110715
Add WLAN_MLME_OBJ_DEL_ID for tracking obj delete requests
sent to target and responses received from target.
Change-Id: I7d7de4b168f1e7174f1cbb213bfe0f75aaa63db9
CRs-Fixed: 2271367
Due to some inconsistency in defining definition of cfg_##mtype##_in_range
and the mtype of the CFG_INI_xxx definitions, usage of cfg_in_range
was causing compilation issues.
Fix the cfg_in_range related macros with correct mtypes
Change-Id: I239a5f8735e5f2d7807b4947e36a655f58f26210
CRs-Fixed: 2278335
Map all module level log APIs to per-level log APIs
to compile out specific log level if required.
Change-Id: I4072b6740cb43200fd95c40943b66e1d5f8f1847
CRs-Fixed: 2266719
Reverting the change where mgmt ctrl frame buffer was assinged NULL for
NONTLV payload case as this check is handled later in the same path.
Change-Id: Icccfb401fe34da593198bac27650139654021636
CRs-Fixed: 2276923
Firmware needs HW MODE ID not list index.
Use HW mode ID to set HW MODE WMI command.
Change-Id: I12f9d83daee1c99706c345d85f03781257b492bf
CRs-Fixed: 2256175
TX comletion for WMI_FORCE_FW_HANG_CMDID would come after
TARGET_STATUS_RESET is set. In such a senario, there would
be memory leak.
Flush TxLookupQueue for WMI_CONTROL_SVC during htc_stop.
Since netbuf is freed in ISR, just free HTC frame here.
Change-Id: I5fab3effda1db70fa9b1208c854231a88b48309b
CRs-Fixed: 2242862
Such log will show once has the spectral scan result message
need to send to application, which is boring and delete it
Change-Id: I4e7fd8877b354d94022b65a8e43cc4ca3e285943
CRs-Fixed: 2274032
