Drop frame if it is not for the vap, to which
client is connected.
Enable this check only for ap.
Change-Id: I33d7eb79267490bdb8697e4e45f789e9f6279f0e
CRs-Fixed: 2756304
Maintain the peer object reference while delaying the processing
of peer frames.
Change-Id: Ia3df18f1281403c6ed36bfbc307b6928d3db9040
CRs-Fixed: 2769113
While creating sg frames,if map fails for a fragment,
the previously mapped fragments must be unmapped.
Also, the nbuf mapping should happen for headlength.
Change-Id: I218efa60be7100a661da7bc3783fa25e5203a273
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove logic to pass value of INI gRoamBeaconRssiWeight
to FW.
Change-Id: Ifa1472ef413d20d0e54649bc24dd6c8d6aac4bc7
CRs-Fixed: 2770278
Increase the num of entries in host side from 32 to 64
so FW can post more descriptors to host src ring
without hitting ring full condition. This is to avoid
back pressure issues in FW. The memory increase is
by 32*4K allocations.
This change is applicable to all HSP targets.
Change-Id: Ia973e13b9d9b2b682957ae19fc3f23dd49bef401
CRs-Fixed: 2761953
Currently we use a single timeout value of FORCE_WAKE_DELAY_TIMEOUT_MS
during hif_force_wake_request. A 50ms value is not enough in some cases
to bring MHI to M0 from M2/M3_fast states. This can result in a write
failure.
In certain cases, when not in an interrupt context, it should be okay
to wait slightly longer for MHI to transition into M0.
Hence, pass 0 as the timeout value to pld_force_wake_request_sync.
This API calls CNSS API which uses a blocking call - mhi_device_get_sync,
to transition MHI to M0, when a value of zero is passed.
Change-Id: I738bf9c4a9a83c943186445cba0174df18a45c74
CRs-Fixed: 2766674
Handle the serialization activation callback for connect and
disconnect and hw mode change resp for connect.
Change-Id: I553a650ea04daa5aa22ee43376b9359aed58c59f
CRs-Fixed: 2776022
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: I29fd5e645c7b43c74e28494c83a6f7d460165e2e
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: If77efc6a5b451bf2cf4acb59d5a2126ce486f02f
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: Ia6d1781f2bf1eea85d4af357e37a00b1f78e264e
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: I18c687ad0564ec70e28cf1f33f26501dda6ee5c5
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: I1dc098793e1df658666343d4293fe3f1c02daf34
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: Icfa7946a447f3cfe8c6ce933a618e8dbb67bd6a0
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: I87b1e6ee5e06e4e6af81395d977595335fe0bc5c
Use cm_sm_deliver_event() API to post the event from any
callback/req/resp from external modules. i.e serialization/hw mode
callback OR any resp from SB/other module or req from NB.
And use cm_sm_deliver_event_sync() API to post the event when the
SM lock is already taken i.e. internal posting of the event.
Also to avoid any race add the connect/disconnect req to the
connection manager request list after posting to the SM.
Change-Id: I98fc39be5ef51242553dae54448c3fe2cb9604d2
CRs-Fixed: 2776010
Set "action" field when send WMI_THERMAL_MGMT_CMDID
to firmware. Then driver can configure the target management action
based on different customer requirement.
Change-Id: I3da5eea0d756444ede816be5cb74407863d63781
CRs-Fixed: 2767144
This records all the WMI events and commands, for all
PDEVs. Set WMI_EXT_DBG flag to enable this feature. Refer
Original Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
Change-Id: I4c9bdfe6fdd195656ca0c01ca400eba595be24a3
CRs-Fixed: 2762266
During driver initialization, IPA TX and RX doorbell registers
are provided to wlan as physical addresses. With SMMU S1 enabled,
they're mapped to IOVA of wlan domain.
On driver deinit path, do smmu unmap for the two IOVA addresses.
Change-Id: I85ef1c3e99bef504abf09eebf9ace760b68f35f1
CRs-Fixed: 2768303
- Added data structure for wds ext peer
- Enhanced DP peer structure to maintain
wds ext peer data structure, which inturn
maintain pointer to osif device.
- Enhanced DP vdev structure to maintain feature
configuration, which will be updated during vdev
creation when feature is flag is set at control
psoc.
- Enhanced cdp_vdev_param_type and cdp_config_param_t
to set wds ext configuration into DP vdev
- Enhanced cdp_cmn_ops structure and corresponding
call back definitons to get peer id, which will
be saved in osif private structure and to set
wds ext peer rx.
- Enhanced cdp_ctrl_ops to send event to control
path when 1st 4 address frame is received from
backhaul.
Change-Id: Ide0ea54e7b2d480ad646fb84b6e4e3108930f986
CRs-Fixed: 2773492
If reo_dst_ctrl register writing failed, this is a fatal error for
IPA pipe going to down case as RX frames will still be routed to
IPA rings then hit NOC error. retry register writing to see any
chance to write successfully, if fail always, trigger SSR or panic.
Change-Id: I3c03faa28e6cc93f396944579a360d5405c8138e
CRs-Fixed: 2774789
SAE Public Key (SAE-PK) authentication is an extension of SAE. Host adds
support for SAE-PK APs roam score which host uses to select AP for initial
connection and roaming.
User configures SAE-PK APs weightage using INI "sae_pk_ap_weightage".
Change-Id: I9066c483188bcbf01e3ffbcc4c57f04e1a9129f1
CRs-Fixed: 2769373
Add connection manager connect response handler in osif to
handle and send the connect response to kernel.
Change-Id: If675055cb2133e64b4b32a47271b12a59eac4a66
CRs-Fixed: 2765977
Currently P2P doesn't support 6Ghz, disable P2P interfaces
6Ghz channel list updating to reduce P2P scan time duration.
Change-Id: Idd851dfb52e123215c5a2bd968f896e88a0dfb0e
CRs-Fixed: 2774756
The logging macros implicitly takes care of embedding function name
in the log, hence there is no need to include __func__ again.
Getting rid of redundant __func__ reduces driver memory footprint.
Change-Id: I6b5beea990e78486e1e5aab5a8df5fc2f1e5ab51
CRs-Fixed: 2774457
1. The logging macros implicitly takes care of embedding function name
in the log, hence there is no need to include __func__ again.
Getting rid of redundant __func__ reduces driver memory footprint.
2. Instead of adding __func__ to the qdf_nofl_* macros, its better to use
qdf_* which already takes care of adding __func__.
Change-Id: If5717c811016845b5cffcf3fdc97805f3a1b731b
CRs-Fixed: 2774457
The logging macros implicitly takes care of embedding function name
in the log, hence there is no need to include __func__ again.
Getting rid of redundant __func__ reduces driver memory footprint.
Change-Id: Ife4d1dbb9bfafa4381f1017e331ddef247c649c2
CRs-Fixed: 2774457
The logging macros implicitly takes care of embedding function name
in the log, hence there is no need to include __func__ again.
Getting rid of redundant __func__ reduces driver memory footprint.
Change-Id: I26bfac840ac6732ac83fb008db8e1702996eb21e
CRs-Fixed: 2774457
In P2P GO mode, on system suspend to s2idle state, bus
is suspended and D0-WoW is enabled. Ping requests from
P2P client cause the REO interrupt to fire but since
system is in s2idle state, system is not woken-up. This
results in destination unreachability or large rtt for
ping on P2P client.
Fix is to do explicit system wakeup when group interrupts
fire after system is in suspend state.
Change-Id: Ic6f51c3fc8bad6da29adf58972890677a81f2064
CRs-Fixed: 2765037
Current code it doesn't realize alignment.
Eg: if require 4096Bytes, it will alloc 4099Bytes,
which cause 2 pages here.
Fix is using qdf_align to align memory size.
Change-Id: I8eca9a085c0270f47318e64cefba686eac39a69a
CRs-Fixed: 2773627
Define SOC level feature flag for WDS extended,
which will configured through ini.
Change-Id: I63a6eaeff5946d12cc92f8996c572f025fbc44f2
CRs-Fixed: 2774054
Assign the candidate validation event handler in the interface
manager. Modify the event data structure to carry information
about the candidate that needs validation.
Change-Id: I6091496df72de34177d4bf5cdfa6fe2db1385084
CRs-fixed: 2774548
In qdf_nbuf_queue_free API __qdf_nbuf_free API is
called to free the nbuf which is not clearing the debug
node instead call qdf_nbuf_free API to delete the nbuf
debug node and free nbuf
Change-Id: I34f06a440ce7758d4ea02fbd1d696366460aa871
Add qdf framework apis to clear cpu_mask and loop
through cpus present and excluded in the cpu_mask.
Use the apis to clear the cpu_mask and loop through
cpus included in and excluded from the cpu_mask to
ensure that the latency of the cores is set correctly.
Change-Id: I131ef3df2ec5b1e5a1a78d39cbc5a5dedbaa2903
CRs-Fixed: 2772353
Add new QCA vendor attributes to configure RSNXE Used (FTE), ignore CSA,
ignore SA Query timeout and OCI frequency override with QCA vendor command
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION for STA testbed role.
Change-Id: I8f46361023444661bd522c8731b4edd864c8cff6
CRs-Fixed: 2759772
With new design, peer is deleted from hash table in
cdp_peer_delete. Hash table search in dp_peer_can_reuse
API at cdp_peer_create will always fail
Update the peer reuse logic to search from inactive list.
Insert peer to inactive list from cdp_peer_delete() and
in peer reuse case search in inactive list to get
peer.
Also add a new lock to protect peer state transition
Change-Id: I2e672fc4a9346c95d67716d437538dd0f96b2207
