Clear recovery flag after idle restart such that next time wifi can
turn on properly.
Change-Id: I7063a9edd08334a84068f88c0564dd4f2aabf666
CRs-Fixed: 2507899
Update the mac, phy, mcs, nss caps of bands
2.4ghz, and 5ghz for HE capabilities in the
wiphy structure to inform userspace about
the driver capability.
Change-Id: I9fb1233e5396bf3ea411c057af9cbcd5b358271c
CRs-Fixed: 2486266
Currently if the driver does not find any scan results
in the ACS scan, it selects a best channel as the PCl
channel by filtering the PCl list based upon the start
and end channel, which may not be correct everytime
as start and end channel does not specify the channels
to be selected.
Fix is to select a default operating channel from the
acs list itself, if no scan results are present.
Change-Id: I9a76957087b9349da66545e0fcaede2355f732cd
CRs-Fixed: 2504796
When CONFIG_FEATURE_HL_GROUP_CREDIT_FLOW_CONTROL is enabled each group
has its own credit limit.
It may happen that when the High Latency TX Scheduler selects a category
the txq at the head may belong to a group which has credits less than the
"credit_reserve" of that group. In this case the scheduler will return
without downloading any frames although the other group may have credits
and also frames to be downloaded.
The scheduler will be called again if there is a credit update from FW or a
packet arrives from network stack and the next txq will be picked up which
belongs to the group which has sufficient credits.
It is seen that sometimes there is no credit update from FW (since the
host has sufficient credits) and the network stack also does not
transmits packet since it has already queued packets in driver's queue.
In such case the scheduler is not called and throughput drop to zero is
seen although there are enough credits on host.
To avoid such a situation, in case scheduler is unable to download
packets from a txq since its group does not have enough credits, iterate
over to the next txq in the chosen category and download its packets.
Exit from the schduler is case able to download from any txq OR not able
to download from any txq.
Change-Id: I6143d5c3aa40761d1997846896e5e77435252b26
CRs-Fixed: 2485819
Convert channel to freq in vdev start structure to
avoid duplicate channel numbers in 6ghz, and 2.4ghz
operation.
Change-Id: Ie78d93a34d1d558b9c94fc8a54aa95ee07bda55e
CRs-Fixed: 2508040
Currently the host driver blocks roam scan offload command to
the target if the connected akm is OWE or SAE.
Add changes to read the WMI_SERVICE_WPA3_SAE_ROAM_SUPPORT and
WMI_SERVICE_WPA3_OWE_ROAM_SUPPORT service capability advertised
by the target and set it to the mlme fw_akm_bitmap. Read this
bitmap in csr_roam_offload_scan() to allow RSO command.
Also the connected akm is sent to the target via the
WMI_AP_PROFILE command. Translate the CSR akm type for OWE and
SAE akm also.
Change-Id: I68527722ab099e0c8e1681ed64ea416b9a6e9936
CRs-Fixed: 2491021
hdd_roam_deregister_tdlssta takes sta_id as input and as a
part of clean up of sta_id, replace it by peer mac address.
Change-Id: Ie0d8e16606bd72d77cc5f152cf5bfe530bd3856b
CRs-Fixed: 2503949
Currently, the cdp API cdp_clear_peer takes as input the sta_id. As a
part of cleaning up the usage of sta_id, replace it by peer mac address.
Change-Id: I4f8bee21ae42d8c9929da8fe2fcfa534778647ed
CRs-Fixed: 2503139
Cleanup ol_txrx_clear_peer to be peer mac address based
from local peer id based.
Change-Id: I63154508e6a08f973a4c602de58217e6bf23d683
CRs-Fixed: 2503737
For WPA3 SAE LFR-3.0 roaming, authentication is offloaded to the
wpa_supplicant via the host driver due to the target crypto
inavailability limitations. The target does candidate selection
and sends the WMI_ROAM_PREAUTH_START_CMDID to the driver.
Once the SAE authentication is done, the supplicant sends the
external auth NL command with the authentication status, PMKID
derived. On receiving this event, send the PMKID, bssid, auth
status to the target over WMI_ROAM_PREAUTH_STATUS_CMDID command.
The host driver decides if the external authentication event is
received for preauth candidate or for initial connection by
checking the connected state information of the csr session.
When the authentication fails with the first candidate, the
target triggers the preauth start for the next candidate. This
happens till there are no candidates available to roam.
There could be a situation where the firmware sends preauth
event for candidate1 and before the supplicant could send the
external auth command to the host driver, the candidate1 preauth
timer could have expired and firmware sends the preauth start for
second candidate. After SAE is done with second candidate also,
the supplicant sends external auth event for second candidate. So
in this situation the firmware should decide to choose the
latest candidate. The host driver here is a mere passthrough and
doesn't maintain timer for the preauth event for each BSSID to
drop the expired candidate preauth events.
Change-Id: I799a05e55a59677dfc2ddf5b55ebc888ccfea03e
CRs-Fixed: 2507003
Enable hw filter in runtime pm mode such that target
CPU wake ups can be avoided in order to achieve max
power savings.
Change-Id: I97aa26b063e70db5e3023faf6aa40cc53bfac3af
CRs-Fixed: 2502744
Remove "CMN_VDEV_MGR_TGT_IF_ENABLE" from Kbuild as target_if common
code is used for vdev operations and legacy code is removed.
Change-Id: I15fb2311aa1b6eeec506d9a6bdc720abaf93244e
CRs-Fixed: 2507456
In case Device is P2P GO and SSR is triggered due to any reason,
Stop_adapter is called. Inside stop adapter adapter->session.ap.beacon
is freed. When P2P GO negotiation is initiated after SSR,
__wlan_hdd_cfg80211_stop_ap function tries to access
adapter->session.ap.beacon which freed during SSR.
Failure is returned in case adapter->session.ap.beacon is NULL,
Which causes failure of p2p negotiation.
Fix is to return success to upper layers in case SAP is already
down, So that beacon interval can be cleaned up.
Change-Id: Ie7a30475b2a54860843b1430964585d22f02c110
CRs-Fixed: 2503216
Enable IPA3 in qca6390 for sdxprairie platform. The IPA
over gsi and smmu are also enabled to make IPA workable.
Change-Id: I5ce6b22dcc4a6678deb6a5ac2d712fb82b6c5bf3
CRs-Fixed: 2496838
The Linux Coding Style frowns upon mixed-case names so rename
identifier tpAddBssParams to be compliant.
The Linux Coding Style enumerates a few special cases where typedefs
are useful, but stresses "NEVER EVER use a typedef unless you can
clearly match one of those rules." The tAddBssParams typedef does
not meet any of those criteria, so replace it (and the "tp" variant)
with a properly named struct.
Change-Id: Icf7fe19cfe6eb6fbac5689e3b5474d38c520b311
CRs-Fixed: 2506539
Firmware offloads WPA3 SAE authentication to host due to the
crypto library availability limitation. Once the roam candidate
selection is done in the firmware, firmware sends the
WMI_ROAM_PREAUTH_START_EVENTID. Once this event is received, the
host driver triggers the SAE.
Add support to offload the SAE authentication from firmware to
wpa_supplicant.
Change-Id: Ie3a9e731194e1edfcd9f33ef0d601767b9485d46
CRs-Fixed: 2490201
Create bss peer in lim_process_mlm_post_join_suspend_link
when sta connect, don't need pose message to wma queue.
Change-Id: I23325c9d41b68f67ea9903008521f026e46395c4
CRs-Fixed: 2505558
In case of high latency data path, addba/delba messages
needs to be handled to support partial reorder.
This reverts commit b8919e14c5
and fix below security isses in ol_tx_addba_handler.
1. handle memory allocation failure scenario.
2. Free array memory before assign new memory to avoid
memory leak.
Change-Id: I4f577c9e8bcb40f70ffb1b305659a059eac68d8d
CRs-Fixed: 2488966
Wifi turn-on will timeout and fail if system suspend occurs during idle
restart. To solve this, abort system suspend during idle restart.
Change-Id: I0a4a1fc9525b5fb19f51a289ca0b8a76c73038e6
CRs-Fixed: 2506716
Currently the host driver updates the okc, pmksa flags
only after the set key management command is received from the
wpa supplicant. This is not needed as set_pmksa command is
received for 802.1x/SAE/OWE and key management needs to be
offloaded to firmware always for it to be able to include PMKID
in reassoc request/responses.
Receive the pmkid_modes from ini config parsed to mlme and
update in 11i tlv param of ROAM_SCAN_MODE command.
Change-Id: If169b402731e3713479e90b627060df470e5dab2
CRs-Fixed: 2506580
The host driver drops any authentication frames that doesn't
belong to current pe session. But, for WPA3 SAE roaming
pre-authentication is offloaded to user space, and as part of
that, the host driver should handle the SAE commit/confirm
messages received from the target AP for which there is no
pe_session.
Add changes to check the auth algorithm in the authentication
frames received for which no pe_session exist and if auth algo is
SAE, indicate that frame to wpa_supplicant.
Change-Id: Ie911524475423704246c1b4f694b83abdbf5129a
CRs-Fixed: 2505556
RDDM can be collected during kernel panic and pld_collect_rddm is
a blocking call that will cause WLAN watchdog if the caller is from
scheduler thread. Hence revert this change and collecting FW dump
inside kernel panic handler.
CRs-Fixed: 2506844
Change-Id: I8667896e61b856fc2e03e1c8278a6451b6a04c24
Currently driver passes sta_id through out the call for getting the TSM
stats. Although passed, the sta_id is not used anywhere in the call
stack. As part of removing the sta_id usage, this sta_id can also be
removed safely.
Remove the usage of sta_id in get TSM stats path.
Change-Id: I1efbb1bfdc8df84e9b6a71dcd5bd39ea93ced21a
CRs-Fixed: 2484701
Increase the max number of MSDU in AMSDU limit to 15 and set the
default value to 0 to config the FW in auto mode selection in which
FW picks the maximum number of MSDUs in AMSDU based on connection mode.
Change-Id: I6c1f1292a31fc9ea857e60e7a81d10b6def5cbc1
CRs-Fixed: 2502544
WOW_NLO_SCAN_COMPLETE_EVENT should be always a wakeable event so
there is no need config it again during runtime PM suspend. Same
for WOW_NLO_DETECTED_EVENT which is already configed by default.
Hence it is safe to skip config dynamic wake events for runtime
PM.
Change-Id: Ie99f9f3dbd5e696601c79b826dbc949c0b439dc1
CRs-fixed: 2502738
FW offload has no wow-wakeup-filter for GC vdev because the number of
filters is limited to two but Host tries to add filter from VDEV-0 to
VDEV-2. To address this, change the max wow config in FW to five.
Change-Id: Ie44403ef127cf0160f39aa001deddee2205b4696
CRs-Fixed: 2505367
