Add QCA vendor command and attributes for vendor specific command to
set MSDU queue depth threshold in target per peer per tid. This command
contains mac addrees, tid, update mask and threshold value.
Change-Id: Ie119ff5aa333bcffcec0850464982dec59fb6a07
CRs-Fixed: 2162455
Define new vendor sub command for configuring the device with
wifi test configuration. Add new test config attributes for this
sub command that are used to configure the device for testbed
configuration.
Change-Id: Ic866d54ba528525c94bcc7b4a5a8cf9c5c1408d0
CRs-Fixed: 2186214
Adds support for vendor attribute to enable RSNIE test mode. Once test
mode is set the driver will use the RSN IE's as-is from the connect
request. Exclusively used for the scenarios where the device is used as
a cert test bed and not recommended for production.
Change-Id: I5ae9856fe9fb0785a625cadd9a1fed1752bcb08a
CRs-Fixed: 2164530
Add QCA vendor command and attributes for vendor specific
Representative RF Operating Parameter (RROP) information. This
information is intended for optional use by external ACS. It provides
guidance values for some RF parameters that are used by the system
during operation, so that external ACS can utilize these to compare
between channels, bands, etc.
CRs-Fixed: 2152786
Change-Id: I911a96ad860331ab7af718c166806ffc7d1c5052
WLAN Latency module (WLM) is added by fw to gain latency
because of schedule out of service like power saving,
scanning, roaming etc. per the level set by framework.
Change-Id: I6b8775e5f492b6f287d60d39610a544114185a23
CRs-Fixed: 2152290
80211 mode information is not getting filled correctly,
fill correct 802.11 mode information.
Change-Id: I7013db95c5010bdaac1f84209534f63d6c7f5719
CRs-Fixed: 2142110
Add following vendor commands and their vendor attributes for
spectral scan.
1) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG
Get current values of spectral parameters.
2) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS
Get stats for spectral scan debug.
3) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO
Get the spectral hardware capability.
4) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS
Get the current status of spectral scan.
CRs-Fixed: 2126313
Change-Id: Id1e9b030f85de166696835fadd36d7856a89625d
Add vendor attribute for data used by
VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands.
Change-Id: If64da28c040868d5b42af202c647251db1a684c0
CRs-Fixed: 2137081
Add cmn support for the following:
- Update ERP info in RSO Start
- Update HLP info in a new command WMI_PDEV_UPDATE_FILS_HLP_PKT_CMDID
- Set/Delete PMK cache info with WMI_PDEV_UPDATE_PMK_CACHE_CMDID
- Process FILS TLV in Roam Synch Indication and update the FILS info
[seq number,PMK, KEK, realm] to Supplicant.
Change-Id: I239bf5d6c4455d39181e335dbf73bcade16aee8e
CRs-Fixed: 2089128
Event indicating to the user space that the driver has detected an
internal failure. The driver is expected to recover from such a failure
automatically, e.g., by resetting the device.
This event carries the information indicating the reason that triggered
this detection.
Change-Id: Ia13e6f102e5e18ec4864ed258728369d51a77ff4
CRs-fixed: 2120886
Add 11ax channel property flags for use with external ACS. Use the
remaining available bits in qca_wlan_vendor_channel_prop_flags for the
first few 11ax flags. Then add qca_wlan_vendor_channel_prop_flags_2 as
a continuation of qca_wlan_vendor_channel_prop_flags and add the
remaining 11ax flags there. qca_wlan_vendor_channel_prop_flags_ext is
not used since it is currently not intended for holding such
information. Rather it is meant for holding additional control
information related to features such as DFS, CSA, etc.
CRs-Fixed: 2115743
Change-Id: I5294f9a8649f79f7012cd790119be773b40f049d
To support the CLD implementation to change BmissFinalBcnt dynamically
(Change-Id: Ie3c3895d48248d349400e755f07edc807e335b44), add new vendor
sub-command id QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BMISS_CNT as 52.
Change-Id: I8df8faab1b49d8fc30a1b775d5f5fec5139ca25d
CRs-Fixed: 2084255
Add support for handling vendor sub command
QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS and its attributes.
CRs-Fixed: 2100587
Change-Id: I8734deb4eb2e2481329131d47b747d266463350a
This commit defines an attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_LISTEN_INTERVAL which allows the currently
used listen interval to be updated using
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION. This update applies
only during the association and is done without updating the AP about
the change.
Change-Id: Ie7b2016c1d3d06c7fcb5099b53e3fc0a159cc246
CRs-Fixed: 2048443
This request ID was wrongly referred from the REQUEST_ID in
enum qca_wlan_vendor_attr_gscan_config_params which is mapped to
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM in PNO Config.
Hence define a different attribute to represent the request ID
for the PNO Config.
CRs-Fixed: 2095917
Change-Id: I76289468fe926f5bd157c4d37b45bbf5a0ebdfb7
Vendor features are used to indicate OCE support
from driver to user space which are set based on ini
params for STA and SAP.
Change-Id: I7ef572443c8a7ed313917e4dfab5f4fab73fe245
CRs-Fixed: 2031980
qcacld-2.0 to qcacld-3.0 propagation
Add QCA_WLAN_VENDOR_ATTR_GET_STATION_REMOTE sub command for peer
station of SoftAP information stats feature, and add related
attributions of this command.
Change-Id: I516d459be2e6556a7e33d285c3ffeacc1ab0f9a5
CRs-Fixed: 2075888
Add host support for detecting SOC power collapse failures in FW and
communicating the same to framework.
Change-Id: Icee39c896802c4d7136e0b8ef442a33feeb4799c
CRs-Fixed: 2016580
Add changes to correct vendor attribute to support external
ACS as defined in qca-vendor-copy.h
Change-Id: I68d04694004e9b44efed7b816b180648c0b59623
CRs-Fixed: 2049159
This commit defines an attribute to
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION -
QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL which can be used to
restrict offchannel operations on the AP/GO interface.
The goal is to restrict any operations which would cause the AP/GO to
leave its operating channel.
Change-Id: I88c2edb9456105068d0907b47dcd78cc09dc2428
CRs-Fixed: 2050999
Since AVOID_FREQUENCIES vendor subcmd might be needed even when
FEATURE_WLAN_CH_AVOID is disabled, always enable
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_INDEX in the vendor
subcmd list.
Change-Id: I4ac774d16540306fdb1301f9f182eeea8571388b
CRs-Fixed: 2045120
Few vendor commands are missing in qca_vendor.h, compared
to qca-vendor.h file present in hostapd.
Add the missing vendor commands and attributes in
driver qca_vendor.h file.
CRs-Fixed: 2034479
Change-Id: Ib95e6cbbf163b904a22fb4eb65d96e9ff8dddf49
Vendor command QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT(127) and
vendor attributes for ps change and TX failure indication are
introduced by this change.
Change-Id: Iaa1c14e5cdc5a7d04beebbff1149daf871f9ef5a
CRs-fixed: 1048388
qcacld-2.0 to qcacld-3.0 propagation
A new 32-bit NL80211 vendor attribute is added to configure propagation
absolute delay for 2G/5G band (unit in us).
Change-Id: I2aecaa8b007c67fa2843ad3922857f923f9b8294
CRs-Fixed: 2034282
qcacld-2.0 to qcacld-3.0 propagation
Add 4 counts to link layer stats which will be retrieved along with
other link layer stats fields by application to decide if channel
hopping needed.
Change-Id: Ic413b8ad98f1147715cf89c083aa9a77e60a2dc6
CRs-Fixed: 1094958
Due to propagation misses, the enum values are not properly aligned
with the corresponding counterparts in supplicant.
Assign the enum values so as to avoid value mismatch.
Change-Id: I12be6c8a08026797cff507a69d01a4d1df2c44e0
CRs-Fixed: 2015066
-Define OS private memory structure and provide pointer
to store the private data of each umac module's os specific data
-Initialize pdev's os private structure member 'wiphy'.
-Move vendor command definition to common project.
Change-Id: I2033bfbf0fe38e82c3a14942ac9f9bfda45e2c6c
CRs-Fixed: 2002991
