WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID: Add support
for a new roam command to get vendor control parameters
from FW. Host needs to send proper param ID in command
(from enum WMI_ROAM_GET_VENDOR_CONTROL_PARAM_ID)
to get corresponding INI value from FW.
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_EVENTID:
Add support for a new roam event to get param value
from FW. FW sends this event upon receiving
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID command.
Change-Id: I03679bcf359a0f425aab7b9ea1c3cb6d84fbb0ca
CRs-Fixed: 3225160
For STA+TDLS on 6 GHz band, set power mode as VLP
if the country supports it. Once there is no
connected peer then restore the mode which
was there before the TDLS connection.
Change-Id: I551ec77545e33cc70d1ce51a0a92cd7d8a56a8db
CRs-Fixed: 3223647
Add check for allowing TDLS 6 GHz such as TDLS
is only allowed for channels which supports
VLP Power level.
Change-Id: I32ea3fb61deed2ff236849ef22894d5cb791dd84
CRs-Fixed: 3223617
Add new tags for reassociation request and reassociation
response. Parse the association id from roam stats event
and send it over the connectivity logging event
Add support to print AID and BT-COEX field.
Change-Id: I7926b5c69a84404b666acfd5e2db30426d085881
CRs-Fixed: 3221624
Combined dp process mic error support for both SAP
and STA interfaces into one API for DP component
Change-Id: Ic78675d4bfdd5b5cc995505bcbf9862711c5ba24
CRs-Fixed: 3226471
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: Ied21e1f913af7a453a523696a779457e092e69bd
CRs-Fixed: 3217413
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: Ide0bb066b25d5191f3654c29bd9e711d731f16c1
CRs-Fixed: 3217412
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: Ie800ea60a4e12deff2ba2b0462de70e2b252082d
CRs-Fixed: 3217411
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: I498703190e452eb4d263ee44ff1745622577eda1
CRs-Fixed: 3217410
In dynamic SBS if 2.4 GHz is sharing mac with 5 GHz low, it can be
dynamically be moved have mac sharing with 5 GHz high.
So if one of the freq is 2.4 GHz in existing 3 connection, the
4th connection can be brought up on any 5 GHz freq (low/high) and
the 2.4 GHz vdev will be moved with other mac.
Similarly for all 3 connection be on 5 GHz and SBS, in case of the
dynamic SBS along with the low/high 5 GHz freq, 2.4 GHz freq can be
included in PCL, as 2.4 GHz can share mac with any of high/low 5 GHz.
e.g
if current concurrency is:
=> STA (2.4 GHz) + SAP (5 GHz low) on mac 0 and STA (5 GHz high)
on mac 1 (LOW mac share with 2.4 GHz)
currently only 5 GHz high is present in PCL thus making:
=> STA (2.4 GHz) + SAP (5 GHz low) on mac 0 and STA (5 GHz high) +
SAP (5 GHz high) on mac 1 (LOW mac shared with 2.4 GHz)
but 5 GHz low (i.e. all 5 GHz) can be provided in PCL to make it as below:
=> STA (2.4 GHz) + SAP (5 GHz high) on mac 0 and STA (5 GHz low) +
SAP (5 GHz low) on mac 1 (HIGH mac shared with 2.4 GHz)
Also for below 5 GHz high and 2.4 GHz can be provided in PCL
=> STA (5 GHz low) + SAP (5 GHz low) on mac 0 and STA (5 GHz high)
on mac 1
If it select 5GHz high:
=> STA (5 GHz low) + SAP (5 GHz low) on mac 0 and STA (5 GHz high) +
SAP (5 GHz high) on mac 1
if it select 2.4 GHz:
=> STA (5 GHz high) + SAP (2 GHz) on mac 0 and STA (5 GHz low) +
SAP (5 GHz low) on mac 1 (HIGH mac shared with 2.4 GHz)
Thus increasing the range of PCL for dynamic SBS.
Change-Id: I3fc555f137050fd49b5ce5eaf12f57f19ee9d903
CRs-Fixed: 3227280
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: I6ddf98a20bf0d5abb3088f8f231e9be8005f15e6
CRs-Fixed: 3217409
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: I7e38c098c58146dc2c762d86ff3eae97a21aa98b
CRs-Fixed: 3217408
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: I6d12321a649b61b35f9abf4fb977d368fc8a6e4e
CRs-Fixed: 3217402
Add support to parse a new INI named
"bss_load_trigger_6g_rssi_threshold/RoamCU_6GRSSIRange"
and send its value to FW via WMI_ROAM_BSS_LOAD_CONFIG_CMDID.
Min, Max and default value of this INI:
Min: -120
Max: 0
Default: -70
Change-Id: I9aa99d887553de4022fc0a31dc0644601cd340d6
CRs-Fixed: 3225548
In the current driver implementation, the default ini value of
gSoftApMaxPeers is set to 32, but for mobile devices, FW can
only support 10 SAP peers at max. Hence, change the default
value of gSoftApMaxPeers to 10.
Change-Id: I8c5a2a8422f02bb464a11d823f8528ebb88bb34c
CRs-Fixed: 3227078
When STA receives a connect req (C1) and it requires hw mode
change. Now the hw mode change resp will take the SME global
lock and call connection manager API, which will try to
acquire CM lock.
But if before that one more connect req (C2) is received in
another thread which has acquired CM lock before C1 can
acquire it, and this connect req C2 will also flush the C1
from CM queue. Now if C2 also require hw mode change, which
also require to acquire SME global lock.
So both connect will wait for each other to complete, leading
to deadlock.
To fix this, from hw mode change response, break the context
(by posting to scheduler thread) so that sme global lock is
released and C2 is processed.
As C1 is already flushed by C2, on scheduler thread execution
once it get CM lock it will be dropped silently, and C2 will
proceed with connect.
Change-Id: I14efb0f21442edcae90a4abea20cb0b9e06a0758
CRs-Fixed: 3223786
Currently host sends first, final bmiss count to fw
Add support for bmiss timeout(in seconds)
during wakeup as well as sleep state to fw.
Change-Id: Id748fabdff94f5fa3038bcea1b1cac733ac2dbe1
CRs-Fixed: 3224106
Add vendor handoff service bit capability support
WLAN_SOC_VENDOR_HANDOFF_CONTROL to check whether the FW
supports vendor handoff feature or not.
Change-Id: Ifdf541761716df9ca5b764c05714a8b501642354
CRs-Fixed: 3224573
Move change Ic8dfdb09c73a1071678612430fff2f23180ad336
Use skb_orphan instead of skb_unshare in TX to DP component
Change-Id: I0372a5c58f96a40d81a6670f507870dbfac63170
CRs-Fixed: 3226184
The API wlan_get_operation_chan_freq will return 0 if
vdev is starting, which is unexpected.
Fix by remove vdev "active" check for get operation chan API.
Change-Id: I12999a68aa74da931ed847b0b696ef49325daa1d
CRs-Fixed: 3225525
Currently PM_STA_SAP_24_STA_5_DBS is not added in fourth connection
pcl table, due to which pcl is becoming 0 in case of P2P on 2 GHZ doing
MCC/SCC with one STA 2 GHZ link and one STA link on 5 GHZ in DBS.
Fix is to make PM_STA_SAP_24_STA_5_DBS same as PM_24_SCC_MCC_PLUS_5_DBS,
so that next/fourth connection can come up on PM_SCC_ON_5_CH_5G.
Change-Id: I4b4c346a998c24ab090307982f1ef6da90bb507c
CRs-Fixed: 3225380
For FT-FILS AKM, 1st connection to an AP in a realm takes place
with Full EAP. 2nd connection to any AP in the realm does the
FT initial mobility domain association with authentication
algorithm as FILS. Subsequent connection/roam happens with
FT protocol.
fils_ft key is derived during 2nd connection. But driver
copies from fils_ft buffer after 1st connection is complete
to fill the PMK in the 11r TLV. This causes the pmk len = 0
is sent in the 11r TLV.
Fill the initial connection PMK in RSO command after 1st
connection. From 2nd connection onwards fill the fils_ft.
Change-Id: I52399fc7bd3526a11e29c54a3ca13d43bbaf6b80
CRs-Fixed: 3197226
Add support for new ini param RoamScan_InactiveTimer. This param
is similar to the existing roam_scan_period_after_inactivity but
unit change
Change-Id: I0e803decaba30fa3f2dfcd95dc62dc71aa1cb3cd
CRs-Fixed: 3016893
GETROAMSCANCONTROL and SETROAMSCANCONTROL driver commands
will be deprecated from Android 13. So remove all logic
related to these driver commands in the host.
Change-Id: I05fafbec2b3f3b798c8c89d0c33b1dbf5c1b45d4
CRs-Fixed: 3225052
Add cfg item to enable/disable eMLSR mode for ML STA
under 802.11be op mode. The cfg value 0 corresponds
to default MLMR mode, 1 corresponds to eMLSR mode.
Change-Id: Ib02516aac8ac44aee6b40a572a9f7469b10d0ac2
CRs-Fixed: 3184745
Add support for new ini param RoamCU_MonitorTime. This param
is similar to the existing bss_load_sample_time but unit
change
Change-Id: Iae05a9568aa29a5f6a9cfc771e66184e51963ab6
CRs-Fixed: 3015967
With restructuring in hif runtime pm module, modules are
required to register with the hif runtime pm module. Also,
link states are depreciated.
This change registers PM QOS and bus suspend modules which
use runtime PM module and replace link state with resuming
link up state in PMO resume.
Change-Id: I0df48e3d31a1fb0f03faaa0617b48937c9bc224b
CRs-Fixed: 3169425
To support shutdown WLAN when system goes into suspend, add idle shutdown
when got PM_SUSPEND_PREPARE/PM_HIBERNATION_PREPARE.
Before suspend/shutdown, user space should stop adapter. And after resume,
user space should restart adapter. This can ensure user and kernel space
to sync adapter's state.
Change-Id: Id1f5172a7fc1792c83c8c1c20127de815f7e4980
CRs-Fixed: 3208931
When MLO SAP is started with two different bands, the 2.4 GHz
link follows the 5GHz and restarts on the same channel
as 5 GHz link.
The user configured frequency for the SAP is cached on the
psoc, therefore during the concurrency check after bringing
up the second connection, 2.4 GHz link considers the new
user configured frequency of 5GHz link and moves to the same
channel.
Save the user configured frequency per vdev to prevent
cross-utilization.
Change-Id: I62f883bf818332bb7d0c838e6ed629a8f2d2f21b
CRs-Fixed: 3209394
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: If55d68cb76589b39b88d859ea4d9fa6e10246c7e
CRs-Fixed: 3217399
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: I7a04c8727121f58a5d6dcd575446c9acedea164b
CRs-Fixed: 3216248
Currently, vdev in link set active request is added
without any check whether it is ml sta vdev or not
due to which may cause issue of empty event for that
particular vdev when sap/p2p vdev is added instead of
ml sta vdev in request.
Fix is to add ml sta vdev in link set request to avoid
mismatch with fw link down and expected vdev down from
host to avoid empty event failure
Change-Id: If99b305c267f094913b8d9ce96a330eed47d0214
CRs-Fixed: 3221818
set_primary_vdev usecase in STA+STA concurrency is to use that
interface(e.g. wlan0) over the other interface(i.e. wlan1) for
data transfer.
Non-primary vdev use case is to check the quality of that link
and decide if data can be switched to it and make it primary.
It may get disabled if it's not going to become primary STA after
measuring the link quality for sometime or with few APs.
Enable roaming on non-primary vdev also to find better AP.
Change-Id: I3205f1ee1b7da4aa813955308730949ccc70941f
CRs-Fixed: 3219633
Link gets disabled when a secondary STA is connected and if it's
causing MCC with one of the links. Once the secondary STA is
disconnected, this link can be re-enabled.
Change-Id: I5b5f885c103d5fb5611c32422c26112b336c97ec
CRs-Fixed: 3219632
When an ML STA connection exists with more than one link and if
secondary STA connection happened, check if it's causing MCC.
Disable the link that is causing MCC with the new station.
Change-Id: If85da9dd778791c1a5d1a658b97942c5277c5429
CRs-Fixed: 3219631
When an ML STA connection exists with more than one link and if
another STA connection is attempted, allow it. Disable the link
causing MCC with the new station after successful connection.
If there is only one link, reject the second STA connection.
Change-Id: I3cd95e0b425f5e1f96d75f226b058668f030151f
CRs-Fixed: 3218700
Add support for new ini param RoamScan_SecondTimer. This param
is similar to the existing roam_scan_inactivity_time but unit
change
Change-Id: I65c7f88b95d102d9101d8dd59c662650706b247d
CRs-Fixed: 3015947
Add support for new ini param RoamScan_FirstTimer. This param
is similar to the existing gEmptyScanRefreshPeriod but units
change
Change-Id: If250ba41d71ef20c7365af2c90550b3b575d285c
CRs-Fixed: 3016232
Currently, roaming state machine relies on the disconnect
sequence where link vdev gets disconnected first and then
assoc vdev. RSO stop is sent as part of link disconnection
and skipped for assoc vdev disconnection as the roaming
state machine is per ML than per link.
If link vdev connection hasn't happened due to some
reason (e.g. link not available in scan while connect, single link
ML connection), RSO stop command is not sent to firmware due
dependency on above sequence.
Check roam state while processing assoc vdev disconnect and send
RSO stop command to firmware if it's in enabled state to cleanup
the RSO state machine in firmware.
Change-Id: If3e9a579c0f3da27a337fbbffcaf0beb580bd8bd
CRs-Fixed: 3215155
Add handling to disable second vdev of mac if miracast
is set for one vdev. In case high throughput or low latency
is required for particular vdev then another vdev on same
mac should be disabled, if present in MCC.
Change-Id: I36cc19f442130b098c4a02ec0ebcf69b89dd2a3c
CRs-Fixed: 3219512
Add support to handle 2 sap and 1 ml sta link.
Currently, get pcl fails for fourth connection when
2 sap link and 1 ml sta link is present due to which
fourth connection is not allowed as pcl len is becoming 0.
Fix is to add handling for fourth connection when existing
concurrency is P2P/SAP + P2P+SAP + 1 ML STA link.
Change-Id: Ief969018da14096f758fea4bd06d17e7e8d039b7
CRs-Fixed: 3219328
Currently in driver, NAN Data Interface can be created with
only name "aware_data" which creates dependency on interface name.
To remove the dependency, the interface is created now by name
provided by Wifi-HAL.
For this, interface is created in STA mode with name provided by
WiFi-HAl. While processing vendor cmd QCA_NL80211_VENDOR_SUBCMD_NDP,
given ifname is searched in adapter list and mode is changed to NDI.
CRs-Fixed: 3196179
Change-Id: I62dd512f8a7de4c69a53babf3112942d348bf3b6
Puncture bitmap is binding with channel bandwidth. If the STA can't
support bandwidth as AP broadcasts, STA need extract puncture bitmap
based on the negotiated bandwidth.
Generate puncture bitmap for STA based on negotiated bandwidth.
Change-Id: Iad303b220fc2e2c5a1b8c125f06300e414bf1fbd
CRs-Fixed: 3207676
Add support to dump concurrency for four
vdevs with mode, vdev id , hw mode and
mac details on which vdevs are in MCC/SCC.
Change-Id: If4c1622770b0e787f5f3de54a3ca92b35a0e1873
CRs-Fixed: 3218170
New PCL PCL PM_SBS_CH_2G,PM_SCC_ON_5G_LOW_5G_LOW,
PM_SCC_ON_5G_HIGH_5G_HIGH do not allow 3 home channel
scenario. Remove it from API
policy_mgr_is_3rd_conn_on_same_band_allowed.
Add PCL string print support for new type:
PM_SCC_ON_5G_LOW_5G_LOW, PM_SCC_ON_5G_HIGH_5G_HIGH.
Change-Id: Ie6dbb042f5ecb04cb999a7949ced8e7c7ab4ad5a
CRs-Fixed: 3215568
Currently, the driver gets the last vdev's chain rssi stats
if fw reports more than one vdev's chain rssi stats, it causes
the last one stats overwrites the former one and the last stats
may not be expected for the request vdev.
To resolve this issue, compare the vdev id before getting the
stats.
Change-Id: Ib789d148a010460108ed73b92ef603cf78c1493a
CRs-Fixed: 3212917
