Found potential issues relating to uninitialized or out-of-bounds variables
present in codec drivers. Place checks to ensure proper ranges are used.
Change-Id: Ib68cba2413788a57237f1f18fc5ce5fb5c6bfb0a
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update function to correctly read array from device tree.
Previously not reading values and returning -EINVAL.
WSA bat_cfg/rload/sys_gain are now correctly configured.
Also add softclip clock enable during pbr config.
Change-Id: Ia1b93acfde3e799b3b72e05966d0fa955c3f49ac
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Add idle detect source select based on NG mode,
if NG2 then source is PRE-LA else LEGACY
Change-Id: I4e0cb3825960e6b795038fb5e85cfaa7a2fbfe62
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Add idle detect enable for mixed control path,
and update copyright markings
Change-Id: Idf2932cd1813082f60ee96010788cdb1ef36afbf
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Lpass-side enablement of new WSA feature.
Configure PBR registers based on WSA bat_cfg/rload/sys_gain.
Some registers updated during init, others during enable_interpolator.
Change-Id: Iac42672182827a9da47700319c61b9d0a17d0936
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update WSA rload, system gain, bat_cfg to get from wsa_macro device tree.
WSA Bat_cfg change to read from VPHX_SYS_EN_STATUS reg.
Add device tree parsing for these params in WSA macro
and WSA driver.
Remove machine driver method of sending the parameters.
Add default_dev_mode (spkr vs rcv) from device tree for WSA.
Move code from spkr event to userspace controls or probe.
Change system_gain and affected params when switching between
dev_modes.
These changes simplify configuration data and code and allow
more registers to be written during bootup or before playback.
Change-Id: I79966c704adfac1bf2d85aa6519ea574764c7a8b
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Sometimes after SSR/DPR is triggered, RX_TX_CORE_CLK, WSA_TX_CORE_CLK
and WSA2_TX_CORE_CLK are not reset which causes WSA or WCD not
detected. Make this change to add reset during SSR.
Change-Id: I343f2f92244de3eee844e220a6201b389dc647b4
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add support to use 4p8MHz DAC rate for receiver over WSA.
Change-Id: Ia0811670326be8131687fbdff70464da063902b2
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add changes to use wsa883x for receiver with
low_noise mode settings.
Change-Id: Icfa43ebbdb1e366f365053535f541bee03751ca3
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Thermal framework is expected an error to be returned if the requested
cur_state exceed the max_state.
Change-Id: I1e0d8124a1aa6c0d755b35225207638aefdcb464
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
Update central broadcast register control to enable bcl path.
Change-Id: Ibc05289d9cdd41e81369c6ef2547eceffa36d73a
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
When multi wsas are connected to wsa-macro and some registers
are written to wsa, swr broadcast mode is used. When closing
one wsa, it will also send the register write to the other wsa
and it should not get updated. The other wsa will be in bad
state.
Remove broadcast for wsa-macro to resolve this issue.
Change-Id: I4c788a213fdcd217861703a13d44c096fd9b632d
Signed-off-by: Meng Wang <mengw@codeaurora.org>
cooling of WSA/WSA2 is to reduce the digital gain.
the cooling callback should only be called when the WSA pointer
has not been initialized.
Also the adjusted volume of RX0 and RX1 need to be set separately.
Change-Id: I6aac0e7a3a3219e8b5c24d711a6c7773824827e9
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
the dapm_mclk_enable flag has not been set back to false
when the actual mclk is disabled.
Change-Id: Ic04756b3dcd074887dd1e93f23cf31873abc1428
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
The digital gain will be adjusted lower than what userspace set
during playback if the device temperature reach the threshold.
Whenever digital gain is changed from userspace, codec will check the cooling
state and adjust the gain.
Change-Id: I52df0f96cf20b90a9bdad70b9c117eed82145fb2
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
During sound card register init call, if swr pdev
is not initialized yet respective soundwire port
config is not updated to soundwire controller device.
In macro drivers, update swr pdev into macro private
data prior to platform device add.
Change-Id: Ifa67471cfc7a10b102b573df6285e598bb0b5e5e
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
In va, rx and wsa macros, move schedule_work call to
add the child devices to the point later to where the parent
initialization gets completed.
Change-Id: I2095f1007beae253534b2ed44f988ce55fad6b75
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Auto suspend timer for core vote is triggering before read write complete.
Move the auto suspend of core vote to post read write operation.
Change-Id: I619da358c7c42af45ef480ed0dba2c2cc26e9cc1
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
RX4/5 are added on bolero 2.5 and can be used for wsa1 macro.
Make this change to add RX4/5.
Change-Id: I4fa77fec3cbcb4d01718026cf648e5e7a171ddb2
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Remove bcl decode registers and add new central broadcast
decode registers.
Enable the new central broadcast (CB) block registers during usecase
start and request for bcl data inorder to receive current bcl events.
Change-Id: I4c626e5083328b4cfdb5c956695078985b5c54a5
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Update codec driver dai link names for proper enumeration of
dai links during sound card enumeration.
Change-Id: I91630f60647c83095bc979b09aad1b273b44f71c
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update compander settings table to calculate based on
upper gain and lower gain.
Change-Id: Ib423f3c14c900c0df03bc8fcab2df0f62fb614f1
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support for thermal cooling device in wsa macro to
set and reset the codec attenuation in 0C use cases.
Change-Id: Id00a3cd5666da906588a75961552ea07e24e1434
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
On lpass-cdc 2.5 support unified compander. Update macros
to align to this feature.
Change-Id: Id444116511db48e8f20948ed7fc4af4fca87b8e4
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Update lpass-cdc version 2p5 registers update and remove old
version tables.
Change-Id: I14e0efe09e3ff5ded49b91e2e226558ae444bc0f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add driver support to enable lpass digital codec for
audio playback and capture usecases.
Change-Id: I3d31d31f340db79334700e8fd495f40479e0ec6c
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
