Currently host sends WMI_REQUEST_LINK_STATS_CMDID for
SAP over WMI to fw and as fw doesn't support this command
over WMI for moselle it does forced assert.
To address this issue send WMI_REQUEST_LINK_STATS_CMDID
command over QMI to fw for moselle.
Change-Id: I03c9daee1d561d69bb5caf195f8e06ce5e4a72fc
CRs-Fixed: 3394792
Added change,
1. Define new DBR module DBR_MODULE_CBF to handle TxBF
standalone sounding CV data and corresponding ring
initialization.
2. API to extract new meta data TLV added for CV data.
3. API to handle standalone sounding complete.
Change-Id: Id28c5561bb8b3bf08de7ddd9aa2365e2ae99f1c2
CRs-Fixed: 3415627
1. Make changes to selectively send the Link control WMI to the
FW with out including the T2LM TLV.
2. Modify the TLV definitions for Link preference to use the newer
Link control TLV.
Change-Id: Id8beae8376ee5d2fb3434367530a0a6bb976597d
CRs-Fixed: 3422692
As part of 'SAP PS with TWT enabled' new
requirement add new vdev set param
wmi_vdev_param_set_sap_ps_with_twt to map host vdev
param with firmware interface new vdev set param
WMI_VDEV_PARAM_SET_SAP_PS_WITH_TWT.
Change-Id: Ia8b45ddb35657e0293cda5821b8ddc92bf68bccc
CRs-Fixed: 3421621
Add peer type for MLO bridge peer. This is a special peer
created on 4-link MLO AP to allow association of some 2-link
MLO STAs.
Change-Id: Id2073ea82582ae67cae03b813d8f7bf44fde9aff
CRs-Fixed: 3412299
Seeing kernel panic when max limit is reached for
pending WMI cmds, self-recovery is triggered that
sends a WMI cmd to crash the FW. This will not go
through and call recovery again
Change-Id: I55d025ac4fbf8b18ac441a135d10d558b2ec4d1e
CRs-Fixed: 3397524
When handling WMI_ROAM_SCAN_STATS_EVENTID,
the number of channels scanned for each roam trigger is fetched from
wmi_roam_scan_info TLV (wmi_roam_scan_info->roam_scan_channel_count),
The total number of channels for all the roam triggers is fetched from
param_buf->num_roam_scan_chan_info.
chan_idx is the index used to fetch the current channel info TLV to be
read. So if wmi_roam_scan_info->roam_scan_channel_count provided by
firmware exceeds the total param_buf->num_roam_scan_chan_info starting
from given chan_idx then OOB access of event buffer can happen.
To avoid this, validate the sum of the current chan_idx and
src_data->roam_scan_channel_count against
evt_buf->num_roam_scan_chan_info.
Change-Id: Ied94464d1f12690cf8832962b94595c2e00c33f8
CRs-Fixed: 3357714
Add API extract_tgtr2p_table_event_tlv to extract TLVs from the response
event of rate2power table update cmd. Add a wrapper function
wmi_extract_tgtr2p_table_event and call extract_tgtr2p_table_event_tlv
from it.
Add the host event id wmi_pdev_set_tgtr2p_table_eventid corresponding to
the target id WMI_PDEV_SET_TGTR2P_TABLE_EVENTID. Also add this mapping
to populate_tlv_events_id function.
Change-Id: I0a870125120f1f92ee50002953e114b27d597ae6
CRs-Fixed: 3405417
Extract the scan blanking feature support from WMI service ready
event and store it in target if data structures. Add API to check
whether scan blanking feature is supported for a given pdev.
Change-Id: I65fefbb879b8433a68338bfcd3e4f729eff3ddd8
CRs-Fixed: 3413922
Host and FW have agreement about using fixed pdev id for CFR on HMT,
which required changes on both sides. In case only picked host
change with old FW, which will case device broken during booting up,
add this change to set pdev id base on FW capability for CFR request.
Change-Id: Iac82074228d42c6f51ea2024defdb0272e5cb396
CRs-Fixed: 3409616
The FW needs mlo_flags of partner links as well during Assoc,
to handle more than 2-link MLO Association.
Extend the peer_assoc_ml_partner_links struct to pass them.
CRs-Fixed: 3403848
Change-Id: I543442ded6b5bc55c278b32f3d449eabacc49919
Add support for vdev_param_set_profile to indicate
AP profile to FW. VDEV_PARAM_XPAN_PROFILE can be used
as bit map to support other AP profiles. So, rename vdev
param VDEV_PARAM_XPAN_PROFILE to VDEV_PARAM_SET_PROFILE
to support multiple ap profiles. Bit 0 indicates XR SAP
profile is enabled or disabled and BIT 1 indicates XPAN
profile is enabled or disabled.
Change-Id: I61c434c7a4bbba013690011c0a777af199207630
CRs-Fixed: 3401468
Add changes to read R-TWT svc bit from FW and update capabilities on
host accordingly. Update add twt session command to include new
params required for R-TWT.
Change-Id: I91cea65ef737b6fa445cb3680dac15e0f1063446
CRs-Fixed: 3399205
Extend WMI_ROAM_STATS_EVENTID event information for
requirement of:
1.Roam trigger related information, include timestamp,
trigger reason, trigger condition, abort reason,
scan type, roam status and fail reason.
2.Roam scan related information, include scan channel
number, dwell type, max dwell time of each channel
and total scan time.
3.all types of roam related frame information, include
timestamp and successful or failed status for Preauth,
Reassoc, EAPOL-M1/M2/M3/M4.
Change-Id: I1f54bc04d7cb8b083f1394989746c57c66fa29f6
CRs-Fixed: 3381545
The misspelling "vaidate" was found during code review, so replace it
with the correct spelling: "validate".
Change-Id: Ifa25e118e71381c5eaace4429ce5f80cd8873f32
CRs-Fixed: 3398094
Add code to handle new set link state command -
MLO_LINK_FORCE_MODE_ACTIVE_INACTIVE.
Change-Id: I4fad93e9e09309f7e8ac07f2e3c43a0aa6472a3a
CRs-Fixed: 3352970
WMA MGT RX process extraction are logged in err level.
Rate limit the logs to avoid excessive logs to kernel
logging.
Change-Id: I5ee92941f83b456b092efff2d3d7509959474c07
CRs-Fixed: 3391352
Moving Rx mgmt extended params parsing error prints to wmi_info.
This is needed to avoid flood of prints in some cases.
Note that this is temporary and the original cause of the error
needs to be root-caused.
CRs-Fixed: 3386728
Change-Id: I0119ff51199424bfcf1f8db284db364fcc5817d5
Current code does not use the SSR host log collection API.
Fix this by adding SSR host log collection API usage.
Change-Id: I9dfb0bd7054986760a711d0752f37f4327c706b2
CRs-Fixed: 3339933
Current code defines wmi_event members of wmi_handle and soc as uint32
when it should be defined as WMI_EVT_ID because it should only hold
wmi events.
Fix this by changing type to WMI_EVT_ID.
Change-Id: Ifa8ab19ac7633457e1160e951026036aa9ebdb04
CRs-Fixed: 3355825
Due to 11KV feature version update, add new enum
"WMI_HOST_VENDOR1_REQ1_VERSION_3_40" in WMI_HOST_VENDOR1_REQ1_VERSION
and convert the host enum to target.
Change-Id: Ibcd52b93b9caf3a8bbfc7fa9028664a2d3666197
CRs-Fixed: 3381254
Currently, firmware sends WMI_WLAN_FREQ_AVOID_EVENTID with set
of frequency ranges to be avoided when it finds LTE operating
around those frequencies. Host driver marks these frequencies
as unsafe and doesn't operate in SAP/P2P-GO mode.
There is a new requirement where SAP can be allowed to operate
in unsafe channels when below conditions are met,
1. Firmware advertises the capability fix_channel_priority in
WMI_COEX_FIX_CHANNEL_CAPABILITIES through ext2 event.
2. SAP is started in a fixed channel.
Fetch the capability fix_channel_priority sent by firmware and
cache it in wlan_psoc_host_service_ext2_param to support
this feature. Add APIs to cache value received from firmware in
psoc_info->info.service_ext2_param.sap_coex_fixed_chan_support
and to fetch the same.
Change-Id: I8ceb501240bc86d6b004446f9927f4402c487203
CRs-Fixed: 3381399
In api extract_roam_11kv_stats_tlv(), request token,
response token and report number are not extracted
for neighbor report.
Add support for request token, response token and
report number for neighbor report.
Change-Id: Iefe384fe760f25d6ce1870e52817c72577f0d5a9
CRs-Fixed: 3370856
The kernel-doc script identified many documentation issues in
the wmi folder, so fix them.
Note that in quite a few cases there is duplicate documentation in .h
and .c files, and in those cases remove the documentation from the .c
files since the interface should be documented, not the
implementation.
Change-Id: I097d5b8e8f0ba09046b7b8abe338d05a00f8cc7e
CRs-Fixed: 3372831
Currently there is no mapping for
wmi_pdev_param_default_6ghz_rate host param
with target param when TARGET_TO_HOST_CONVERSION
is enabled.This change will map the same.
Change-Id: I91a0af726ab787c93b3ed86bf975878a1919c7ed
CRs-Fixed: 3363930
Realloc memory for wmi_service_ext_bitmap when
WMI_SERVICE_AVAILABLE_EVENTID event come, and
the num of wmi_service_ext_bitmap large then
previous num.
Change-Id: I2800fe3274e5516369486ef065ce03ba121bd5b3
CRs-Fixed: 3346739
Update MVR handlers and init to setup/use MVR bitmap
depending on bitmap MVR support by FW.
Change-Id: I3a73ddefeae85d8f6b4fc31f9c1f1164fa5346c7
CRs-Fixed: 3355001
Add debug prints in the event handler of WMI_REG_CHAN_LIST_CC_EXT_EVENT
to enhance debuggability. Also print the AP power type in the
function "send_set_tpc_power_cmd_tlv" in string format.
Change-Id: I4df5b72a5b07c530241985ef5a91cf402dc60b80
CRs-Fixed: 3322198
Add ucfg and wmi changes to support for green ap low latency
power mode enable/disable command.
Change-Id: Ib9112e384c8354f1eff0f15610301225d51ef3ac
CRs-Fixed: 3265649
