Add new frontend Multimedia31 and Multimedia32 for haptics.
Change-Id: Ibf36090f2aef8ec76bbc554587a8acf2ff8051de
Signed-off-by: Meng Wang <mengw@codeaurora.org>
During SSR/PDR, bring down wsa at down
event and restore after SSR up event.
Change-Id: I9a8d3c109144cb0a911cd7597bffc220b0ce95b7
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add routing_lock mutex to protect global variables in _get() & _put()
callback of Listen App Type Config mixer control.
Change-Id: I6857a6e72dcb7f21633919b716910577af4906d2
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
In WSA analog driver, disable MCLK only if clock enabled.
Change-Id: I3a6aa42dc258e3c6ad1ceccdf74f0136338d79b2
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
For bolero 2.x, update dmic clk_div to use 1.2M
instead of 600k if non-island usecase.
Change-Id: Ia057283c164de576cfd05f4c64f6db24db589ead
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Glitch is coming sometimes during amic record.
Correct sequence to resolve the glitch.
Change-Id: I3c062632229826f6fe32e2f1ea9e07381c21d902
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
When multiple LSM sessions are running, lsm port index might
be overwritten with index of different sessions during
concurrent LPI and Non LPI session switches. Maintain
lsm port index on a per session basis to avoid this issue.
Change-Id: I943ea7899b977e06f467a140a9d1c9feb31c58bd
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Remove soundwire driver ops to avoid deadlock during audio
sub system restart.
Handle SWR DMICs enable/disable during usecase.
CRs-Fixed: 2648763
Change-Id: I73cc95ae389da9dee742544f29ceca9d9b7ac9c6
Add SENARY_MI2S_TX to ec_ref_rx and ext_ec_ref_rx so
it can be used for Audio EC reference and Voice
external EC reference.
CRs-Fixed: 2576685
Change-Id: I08253e705f26293255eea41140fd3461ee300b6b
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Doa tracking params are applicable only for LE platforms.
Add respective check for the same. Also add config to
enable doa params for LE.
Change-Id: Ia8c2fd095deb44a3dd0b958da0b73c94dbc7d819
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
There is higher noise during headset btn press on some
headsets. Change hold time after button release to 600ms
to resolve the noise.
Change-Id: I87e5e13ce39849090da3d3e50ec53e7fd5fdc0e7
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add DOA_PARAMS_ENABLED flag to enable tracking params for LE.
Change-Id: I54f40a72338ab09e43d002d19c74f845c5afcd49
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add mixer control support to send ffecns freeze
event.
Change-Id: I86bfd27aac312f85ebbde1f35ff4f65f589c6fec
Signed-off-by: Ramu Gottipati <ramug@codeaurora.org>
Currently, the length of timeout in adm_open for waiting response
from ADSP is 1 second. To prevent unnecessary timeout that results
adm_open failure, increase the length of timeout to 2 seconds.
Change-Id: I670f44964538c3176130c4bb5f8b7a3b3eaf8d8b
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Handset record does not resume if pdr is performed
during record. Make VA DMIC_CTL registers as volatile
to write proper value of register to hw.
Change-Id: I2cc10d2eab18e3e8126c56caffa126195c02b4e3
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Remove common mutex lock before invoking unmap physical
memory command to avoid deadlock issue between voice lock
and common lock in concurrency use cases.
Change-Id: Iaca089f4ff1b6da16e0e59939088fb59516362aa
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Check for soundwire clock source before clock switch to avoid
redundant clock switch for the same clock source.
Change-Id: I8a7a116cc956f427af677b413928dace5a39a23d
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Micbias2 internal pull-up remains enabled even after headphone is detected.
This results in power issues. Disable pull up after insertion detection.
Change-Id: I335dbb498192738fc282421d92510400a661cf0c
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Check soundwire clock source before clock switch to avoid
redundant soundwire device suspend for the same clock source.
Change-Id: I613789b23c171959a60c9a059a30b3f1494f3dfa
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Headset is corrected as lineout during SSR/PDR. This is
because adc voltage is not measured correctly due to SSR state.
Enable flag deinit_in_progress during SSR down to check if
device is not reported and disable it after device up.
Change-Id: I6fc4fff4149c36ba16aa668a960505504a5d811f
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
