Add config to enable go ignore non-p2p probe req feature. If set,
don't need to send probe rsp to STA, hence save power.
Change-Id: I8b4776e4ffd1315bf30e210797b22a673cf2a6c2
CRs-Fixed: 3812361
Currently while processing roam synch legacy case
is not handled properly for self-roaming case and
host is sending roam as it finds peer is
already attached to a vdev.
To address this issue don't send roam stop if peer
is attached to same vdev.
Change-Id: I75bbeb23e2b94458e0709b8b27178549c7104ea1
CRs-Fixed: 3690348
Host driver opens adapter with ML-support having 2 vdevs and
1 MLD self peer. Now, during runtime, the country changes to
a non-11be supported region. This is followed by a set mac
address request from userspace, but since the EHT support
is disabled due to country change, the driver tries to
lookup the self peer using link mac address. But, since the
peer is created using MLD mac, the set mac address fails
leading to issues with DP-peer creation during connection.
To fix this, remove the EHT capability check from the adapter
routine and look up the peers and mac address only based on
the ML adapter configuration.
Change-Id: Iaabdf6c6b59d3b168c719b6dc0afd272a5725912
CRs-Fixed: 3800291
Currently, get_channel call doesn't consider the secondary
channel to compute the ccfs1. Therefore, in 2.4 GHz
HT40+/HT40- cases, get_channel returns wrong ccfs1.
To fix this, if STA connection is in HE/HT/EHT40 in 2.4 GHz,
then use secondary channel frequency for channel parameter
computation.
Change-Id: I44310192f8dcb5e02003f60b22fdae95d76a1870
CRs-Fixed: 3815126
os_if_cstats_log_nan_disc_enable_req_evt is defined but not
called when there is a NAN discovery enable event, this resulted
in missing of NAN discovery enable stats in the chipset stats
Fix this by calling os_if_cstats_log_nan_disc_enable_req_evt
when there is a NAN discovery enable event
Change-Id: Ic9610e01fb0449c5233d6e651c42d395cb1f21c5
CRs-Fixed: 3804972
Add chipset stats for deauth event when roam
is trgiggered due to deauth frame from AP
Change-Id: I21125d1fde5805a3893ff8d0f9ec2be49082f994
CRs-Fixed: 3804975
Currently nack status is read using the pmo lock with bottom half
disabled, but if the wow wakeup irq is triggered at the sametime
it is waiting for the same psoc lock resulting in the dead lock.
Hence get the hif handle directly rather than with spinlock api.
CRs-Fixed: 3798619
Change-Id: Ic2d5cd07c2dafb525003ec7e9e02bc17d0876dd0
Scenario here is:
1. AP configured in 320 MHz
2. Set country code = KR in DUT, It means DUT does not
support connection in 320 MHz.
3. Trigger connection with AP, while processing driver
founds, country code is KR, so downgraded connected
channel with to next max supported channel width as
per regulatory rule (which is 160 MHz here) and
successfully associated with AP in 160 MHz.
4. After connection Host receives “get_channel” request
from kernel.
5. Host gets currently connected BSSID and fetch
corresponding channel information from scan cache.
6. As scan cache gets updated via beacon/probe response
from AP and here advertise beacon/probe response in
320 MHz. This results value of channel width for
connected BSSID is 320 MHz and same host fill in
get_channel response.
7. By this time driver connected in 160 MHz and
connected channel width indicated to kernel is 320 MHz.
Due to mismatch in channel width, kernel triggered
disconnection.
Fix is to update connected channel width in response to
“get_channel” request.
Change-Id: I7c4a262d337f9deb8cb4436cae537d0069a98de1
CRs-Fixed: 3810073
Pointer returned from tdls_process_mlo_choice_tdls_vdev can be
NULL. Add NULL check to avoid dereference.
Change-Id: Ibd7f8914a721517d7b959b864c033686b1160648
CRs-Fixed: 3757772
This change is to check for station count with maximum
number of concurrent connections.
Change-Id: I539ae0b78deadf5e514f00d57542b4dd871e0e4e
CRs-Fixed: 3776536
Currently, driver check peer mac address to filter out duplicate
command in serialization queue. This peer mac address will be
peer MLD address from North bound and link address from the south
bound. For multi-link SAP, if disassociation or deauthentication
request received for two links of same STA (MLD address is same but
link address is different), then driver queue disassociation or
deauthentication command in the serialization for both links.
This will lead to duplicate disassociation or DE authentication commands
in the serialization for same STA.
So, to fix this, add check for MLD address and link address in the
serialization filter.
Change-Id: I2619e3009b28ceba6af4383e36ae40af82020b5f
CRs-Fixed: 3790148
For 11ax SAP, when received radar, sap_is_chan_change_needed for 11BE
return false sometimes, target freq and bw is same as current, after
CSA, vdev restart failed in lim_process_sme_channel_change_request,
vdev becomes hung in SUSPEND-SP-CSA_RESTART. After 1 min, Kernel trigger
disconnect.
To fix it, if SAP isn't 11BE mode, sap_is_chan_change_needed return
true directly as legacy code.
Change-Id: I6db94c3117890d0ee924975af8b3c9efd9fb08ba
CRs-Fixed: 3789066
Add support to handle GET_KEEP_ALIVE_INETRVAL command.
If received command in connected state return keep alive
period configured to firmware but if command received in
disconnected state, if user space has set keep alive
period then return the user space configured value or
else return INI configured value.
Change-Id: I5d386ecd141531795b471198bd70afa20210bdc5
CRs-Fixed: 3818096
When connect 2 + 6 GHz MLO AP, 2 GHz is assoc link, when populate per
sta profile of 6 GHz in assoc req, use BW of current 2 GHz session
wrongly, so 320M is disabled wrongly in EHT cap.
To fix it, when populate per sta profile for assoc req, pass
pe_session as NULL since partner link pe session isn't created at that
time, don't clear 320M cap for 6 GHz link.
When config EPCS, update eht cap at same time.
Change-Id: I7422f0353cc087a24575f9be1d5b30a032cc7b8e
CRs-Fixed: 3821390
Below is the sequence of events causing RSO init command to
be sent to firmware while disconnect is happening:
1. Roam Start received from firmware in scheduler thread.
2. Connect request for reassoc received in supplicant thread.
3. This connect request triggers disconnect, but before RSO stop
& deinit is sent to firmware, roam synch event is received. This
roam synch is getting processed in the scheduler thread. But RSO
stop & deinit are sent in wpa_supplicant thread.
4. As part of roam synch host is posting RSO_ENABLE to RSO state
machine which triggers roam init to firmware.
5. Since disconnect sequence is already in progress, the RSO is
in init state before vdev stop. Disconnect sequence got executed
cleanly except for the RSO sequence.
This results in abnormal firmware behavior.
Check if the vdev is in connected state before sending roam init
to firmware.
CRs-Fixed: 3769766
Change-Id: I709c165bd9b11b323666e0e27cece76e6a4641dd
Currently, there is a rcu stall when dp vdev obtained from
dp_soc does not match vdev present in fisa flow which has
same vdev_id.
To fix this, if vdev id matches for both the vdev, drop the
skb.
Change-Id: I8be4ea77bd0bdd3096ebbad627674f7b8a9801cf
CRs-Fixed: 3817471
When dp_link is allocated, the member variable is
not initialized correctly. Change is to give initial
value to avoid of crash.
Change-Id: I0d032b4a25f31768f2aa5e7161cc625abe867df5
CRs-Fixed: 3797243
P2P GO negotiation request is supposed to come only on
DUT listen channel.
But there may be chance of leakage on 2.4 GHz because
the ADC sampling rate is 60 MHz, DUT would receive the
attenuated (Rx BBF filter) signal 60 MHz away. So, the
req may get received in non-social channel.
fix is, add new logic to drop the P2P Go Negotiation
request if it is received on non-social channel.
Change-Id: I12ddddd47cd9b494f618b1ba9b383118221ff9d2
CRs-Fixed: 3808813
Currently, when Rx monitor mode interface is coming up, STA is
not disconnected causing RXDMA ring to be used as both error ring
and destination ring. This is causing backpressure in RXDMA ring.
To fix this, issue disconnect for STA when Rx monitor mode is
being added.
Change-Id: I95e73edd80472a8aae9092ebdbce5e514b1cd531
CRs-Fixed: 3799325
During roaming tests, if an AP gets kicked out due to move away,
the driver adds the BSSID to an avoid list.
However, this approach has a drawback. If the AP later moves nearby
again, it won’t be picked up because it’s still on the avoid list.
To address this, the driver checks the RSSI value before adding the
BSSID to the avoid list for kickout roam reasons.
If the RSSI value is above -70 dBm (from INI good_rssi_threshold)
and get kickout, which means AP may have functionality issue, then
the BSSID can be added to the avoid list. Otherwise, if the signal
strength is bad below -70 dBm, the BSSID should not be avoid list
because the AP may move away, let roam logic to pick up or not based
on score value of the BSS.
Change-Id: I4ace2733cfe270667d14095f1d4dc2c5abb9f0d5
CRs-Fixed: 3788290
If pre-cac channel from userspace is Non DFS channel but
the pre-cac bandwidth is set to 160 MHz which cover DFS channel
range, we still allow the request instead of reject it.
Change-Id: I9a0778855bf6659fab20ae0cc82a17d652b0d282
CRs-Fixed: 3748905
If CSR roam synch callback fails then the status is not updated
with error status code and this causes the caller to consider
roam synch indication is successful and RSO stop is not sent
to firmware leading to roam synch completion timeout at firmware
Send correct status to the caller of the api:
cm_roam_sync_event_handler_cb() if CSR roam synch processing
fails
CRs-Fixed: 3800617
Change-Id: I29214c04976498fd81cb5266738e341928af3af7
If dyn_modulated_dtim enabled and activated, vdev WLAN_LEGACY_WMA_ID ref
leak may happen in wma_add_sta_req_sta_mode.
To fix it, release vdev ref in all cases in wma_add_sta_req_sta_mode.
Change-Id: Ib1d8262760fdc644a382c1405cdfda8498703440
CRs-Fixed: 3716752
For mlo inactive links, F/W always set RSSI as -128, but report good old
link speed to host which doesn't match RSSI.
To fix it, when RSSI is -128, keep rate and links speed as 0, don't fill
old link speed from F/W.
Change-Id: I38562e724aa751ffaaad05a753fd479339468c62
CRs-Fixed: 3804884
