Remove Tx flow control parameters from being
printed in multiple dumpStats statistics.
Change-Id: I2704c2b0a53bb08c16bdd8d61fb4dac21cfcfc31
CRs-Fixed: 2097229
Provide an API to accept the config parameters
from the upper layer and store them in wlan_cfg_ctx.
Enable/Disable the datapath features based on these
parameters.
Change-Id: I9336cac686bfb875cea242685a122ec98acdf8c2
CRs-Fixed: 2097229
Add feature to obtain position of head and tail pointer of all rings.
Change code to include 'iwpriv athx txrx_stats 263' that gives the entries
pointed to by head and tail pointer.
Change-Id: Ib125db8982362c50a415058fd29f07f326991a50
CRs-fixed: 2098806
ARP packets will not get chance to be transmitted if
netif queues are paused due to low tx descriptor availability.
Send ARP packets from HI PRIO queue so that it can be transmitted
in noisy environment.
Add netif action type for HI PRIO queue.
Change-Id: If3fea405bed07823f11b505f9a6627a3f14c343a
CRs-Fixed: 2083277
Add CDP API to set ptp rx opt. This rx opt is
needed for determining whether to time stamp
the received MSDUs or not.
Change-Id: Ia7cfbe838ff62ef0775164f542a160bf93e44a74
CRs-Fixed: 2095956
Remove the NAPI quota check on processing monitor destination
ring. The quota is applied to monitor status ring process.
change Dummy TLV in status ring handling. The Dummy TLV
is not an indication of PPDU done.
Remove the mpdu err check in MPDU pop function.
Increase Monitor buffer ring, monitor destination ring
and monitor descriptor ring size.
Push destination ring buffer to stack when ppdu id from
status ring is bigger than ppdu id from destination ring.
Change-Id: If592a89ad132d405ab215024c8198a020153a9ff
Add a new dumpStats parameter (25) to dump disconnect stats.
The following command will dump disconnect Stats into QXDM.
>iwpriv wlan0 dumpStats 25
Related qcacld-3.0 change I0908c947b5c829f51b087871ad11d5674908dca2
Change-Id: I359ef19c268123848fe6195f6453a6c246fba3a1
CRs-Fixed: 2058958
The WLAN driver should compile against kernels that do not include the
IPA driver. Move an ipa.h header file include under an IPA_OFFLOAD
feature guard to allow the driver to compile when IPA is not supported.
Change-Id: I4d8ca77bace273d16453b123daa0363de16bf5ea
CRs-Fixed: 2111891
Add support to include per msdu header info for each msdu in monitor mode.
Set HTT_RX_RING_SELECTION_CFG_TLV_FILTER_IN_FLAG_RX_RESERVED in htt msg
from host. Enable per msdu bit and set it in the dp_htt to be used for
filtering.
Change-Id: I36217e893c40570c86b758f586c581d88633b557
CRs-fixed: 2101013
Add a check for update_dp_stats before calling it.
This is registered only for WIN & causes a crash on MCL.
Change-Id: I584b7dba73bcc2426deb97641c30b4d704ce0d8b
CRs-Fixed: 2111735
earlier we configured only REO_R0_DESTINATION_RING_CTRL_IX_2
and REO_R0_DESTINATION_RING_CTRL_IX_3, but we now configure
REO_R0_DESTINATION_RING_CTRL_IX_0 and
REO_R0_DESTINATION_RING_CTRL_IX_1. Also added module param for
rx hash steering.
Change-Id: I690aa395bc19e49df3687be2e70eaaad4994003e
Add support to process HTT PPDU per-user TLVs that are sent to host from
FW on PPDU Tx completions.
Change-Id: Ia05d5d0e045bfeb4143886ef3a1b075d927645fa
CRs-Fixed: 2098696
Add support for processing rssi, mcs etc fields from
PPDU status ring and delivering to CDP interface
Change-Id: I312bef20605594645bae6ec748f0b59e4d427075
CRs-Fixed: 2098696
Add support to process HTT PPDU statistics for transmit
datapath and deliver PPDU indication to CDP interface.
Change-Id: I22e757497e13ce86fb7b42112fd56555c58e97bc
CRs-Fixed: 2098696
During soc detach, free the memory allocated for
link desc pool. This will return the 2 MB regions to
buddy allocator.
Change-Id: I1f1929525cf1d5de32321d56ec947969bebfeb93
The cdp_peer_ops register_ocb_peer() method currently takes a cds_ctx
parameter. Converged datapath APIs should not require the MCL-specific
CDS context, and in fact it is not required by the MCL implementation,
so remove it from all OCB peer registration APIs.
Change-Id: I8ebb49713b26ef5bbf25cc7e4b09b1b29e579844
CRs-Fixed: 2103450
[PATCH 0/1][CR:2093711]
The client isolation feature parameters were
pass and stored but were not used for enabling/disabling.
Added the changes to enable disable the feature.
iwpriv ath0 ap_bridge 1
iwpriv ath0 get_ap_bridge
By default feature is enabled so the STA-STA packet does not
go through the bridge interface and incase the feature is disabled
packets are given to the kernel stack.
Change-Id: I76e8683a0a7e8791cf8cf743e39b7201fee39d30
Add module parameter to pass napi budget for dp interrupts. Default value is
set to 128.
Change-Id: I6b3761c6908ed9cec4e40118a657b39da6ac2532
CRs-Fixed: 2095242
Addded stats and filtering support in delivering of unencrypted frames
in mesh mode.
Change-Id: I2fd72f766660e500affeccda9aad03a0313d0659
CRs-Fixed: 2004658
Add support for hash based steering in RX path, also
considered cases where a particular radio or both radios
are handled by NSS offload.
CRs-Fixed: 2092357
Change-Id: Ib0e88c28eecd7bfdb52c7337d4485ac41371be68
Add a division factor for number of tx completions to be accounted for in NAPI
budget. Fix the data type of budget to int to account for negative values.
Change-Id: I620af5537c5c1cdf3161da3a3c053a2c8bf777e8
CRs-Fixed: 2092526
Add required WMI commands to communicate support of
EXT NSS Signaling between host and FW. Also, if
EXT NSS Signaling is supported the use new WMI to
communicate the required information between host and FW.
Change-Id: If3e1ef11a55f8fbdffddb3b10963878a6a2ca415
CRs-Fixed: 2089043
Th tail fragment nbuf->next is not set to NULL which is causing
host crash in RAW mode RX path for bigger size pkts (AMSDU)
Change-Id: Id0a16419988f72e5d8dfb8e942063f9d797abfab
Add a check to ensure MEC happens only for multicast
and broadcast pkts only. Also added additional check to
drop the mcbc pkt whose src MAC addr matches to the rx vdev.
This is in addition to the other MEC checks already in place.
CRs-Fixed: 2097918
Change-Id: Ie41fce0368cd6147c2a3678f8f4b31eb400f933c
Add CDP API for HK to get security type for ucast and mcast from
peer handler. Add additional peer handler argument for raw mode
rx decap functions. The peer handler is needed in the raw mode
functions for getting the security type of the frame and process
it accordingly.
Change-Id: I3c2688f33ca36a5bd2a747699d5acaab3ba14cfe
When hdd_get_tx_resource is called, if free Tx desc is lower than low water
mark, vdev->os_q_paused will be set as 1 and WLAN_STOP_ALL_NETIF_QUEUE will
be triggered after a while. Before WLAN_STOP_ALL_NETIF_QUEUE is triggered,
if ol_tx_flow_ct_unpause_os_q is called, WLAN_WAKE_ALL_NETIF_QUEUE will be
triggered and vdev->os_q_paused will be set as 0. In such case there will
be no flow control unpaused forever.
Tx should be paused by flow control when Tx desc is lower than low water
mark, and unpaused when Tx desc is bigger than high water mark or Tx is
already paused by flow control.
Change-Id: Ib60139fd94a4fb88c92a7f8aaf886ae9d3ca4c75
CRs-Fixed: 2090475
Fixed key index extraction in hal api to get correct key index from
key id octet.
Change-Id: I342c05260b17c5baba868223e1b6e75d995823aa
CRs-Fixed: 2073737
