Add enhanced statistics for management Rx reorder
module. Add key stats about the frames entering
and leaving the reorder module.
CRs-Fixed: 3094874
Change-Id: I8df7a9ac98106ff834c3897a6b495b8a0dd5214d
The operations with stale and pending list should be atomic.
Share a single spin lock for pending and stale list so that
the modifications are atomic.
CRs-Fixed: 3081847
Change-Id: Ia647de01af0172039659c73bdd32de819dae1257
Skip sending triggers for MLO setup if a soc is not mlo capable to avoid
inconsistent MLO setup exchange with target.
Change-Id: Ie17dcd03e2fcf778795d964a55e4a400adacfb33
CRs-Fixed: 3100309
Drop the log level to debug from error for the prints indicating
input or output channel number is invalid.
Change-Id: Ief2f609f1c95c223c97cded6d81460e52a34c729
CRs-Fixed: 3100105
For WCN7850, the first mac (i.e.. MAC0) is capable of
2G/5G and 6G data transfer. Hence initialize and use
only on RXDMA monitor status ring.
Change-Id: Idb6e23a887a9ed32a52dd54765e5ed3c6a12df06
CRs-Fixed: 3094138
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicated the different capabilities of the Spectral HW block.
Add support to extract the fixed parameters from this event.
Change-Id: Ib13108f078de008b6a76a25a010e85a7fdb6f5fe
CRs-Fixed: 3098203
- make monitor ops per soc, so that when ops are
reset it will not impact other soc.
- reset filter setting during pdev deinit.
Change-Id: Ic40582fc1d03343d0bfaf879177212ecb83ae058
CRs-Fixed: 3086841
For KIWI target, 64-bit timestamp is reported
in the PHY TLVs. use the first 32-bits timestamp
value for the radiotap header.
Change-Id: Ia7d7a6913e4cdca3a1432cc5edbb0348ec8a6857
CRs-Fixed: 3096680
For Kiwi, if force device wake mechanism is enabled for register
writing, host will try to wake up UMAC before writing real register,
this also happened for CMEM write. but during soc deinit/detach
period, device might already lose power supply and then UMAC can't
be awake from host view result in panic.
Remove HW CC CMEM cleanup which is not necessary for Kiwi as
CMEM will be re-configured during next boot up.
Change-Id: I515308c065eefbba896cb232773b8d7ffc32d385
CRs-Fixed: 3097991
For Kiwi, if UMAC force wake is enabled, HIF window register
support is needed as well. currently hal_soc->init_phase just be
true for a very short periord, this lead to hif_force_wake_request
is called frequently when configure register during initialization,
this is not necessary as pld and device is not in power collapse
state during this period.
Enable HIF window register and increase init_phase true period
Change-Id: I0b5394bbc1ca73d20b2fcabbf2a261e6f8335626
CRs-Fixed: 3097991
To support 4 SAP concurrency on sdxlemur, it is required to extend IPA
max interface number to 4.
wlan_ipa_iface_2_client is for legacy chip which support MCC, it is not
useful for nowaday chip, just extend it to 4 interface with same
content as other interface to pass ipa setup.
And Fix a static analyze error about session_id.
Change-Id: I5f2a4a0e3ff943e15ab9907e206b64423002eccb
CRs-Fixed: 3092428
Wlan host side doesn't have ways to know whether OBSS scan is
run or not if OBSS scan is offloaded to FW. So should let OBSS
scan disable action called directly to make sure OBSS scan is
disabled during each suspend.
Change-Id: I6134c038bbea2ae4f09662354d60063488696cb5
CRs-Fixed: 3097186
When populating TBTT OFFSET in RNR IE, if TBTT OFFSET is unknown,
set it as WLAN_RNR_TBTT_OFFSET_INVALID.
Change-Id: Ie60d4b66c849b4c9d19cc63f88821b564aeace07
CRs-Fixed: 3097197
Currently, VDEV manager responses are using legacy path instead of
target_if, vdev_mgr and os_if components. As the driver implementation
is planned for converged model, legacy implementation will be moved to
the respective components.
To avoid rework, Use target_if, vdev_mgr and os_if components to process
the FW responses corresponding to the vdev manager.
Change-Id: I778f6de93481fc730383e8f8e1c604f173947d69
CRs-Fixed: 3093776
Currently, Driver is notifying the connect response to the user-space
immediately after first link connection. At this time, partner vdev
information is not available. Hence user space is notified with invalid
partner wdevs.
To avoid this, set link ID's for the partner VDEVs before notifying the
connect completion to is_if.
Change-Id: I6524e9af9359fced471db8f25220d2ac6854fc22
CRs-Fixed: 3097646
Optimize the checks in reg_get_6g_power_type_for_ctry API to
reduce logging. Logs will appear only during initial connection
and not after parsing each beacon.
Change-Id: I4c4904c4825cd822d119e4ee9b2c69e96612be31
CRs-Fixed: 3094366
Populate the number of Spectral detector info TLVs and
add the debug prints for Beryllium Spectral TLV extraction APIs.
Change-Id: I1f449389ba630e30e160b3070bee14d93a45c3be
CRs-Fixed: 3097662
In scenarios where if the VDEV has just sent the start request and a
partner vdev has received start response, will bring up all the MLD
AP vdevs without waiting in MLO_SYNC_WAIT as the existing check only
validates if the VDEV is in INIT or STOP state.
Add change to send MLO_SYNC_COMPLETE only after all the partner VDEVs
have move to either UP or DFS_CAC_WAIT state.
Change-Id: I3175b94e90abf6994fc6922bbe8e62a7986208a6
CRs-Fixed: 3096634
In dual SAP connection, calls only disable_pipes to disable IPA,
whereas during second SAP disconnection, to enable IPA, calls
wlan_ipa_uc_handle_first_con, which sends ipa_set_active MSG
as true to FW, for both Tx/Rx to resume.
So calling wlan_ipa_uc_handle_last_discon in dual SAP mode,
which sends ipa_set_active MSG as false to FW, to suspend.
Change-Id: I224e94a003030f497e15f242634f15d9c71b9ef0
CRs-Fixed: 3094276
As bank registers need to be reconfigured after
soc deinit. Initialize bank profiles in SOC init
instead of SOC attach
Change-Id: I3baaf62e1cb73d2882d03012e9e078523dcfe736
As requirement, concurrent mode, station 5G/2G scan need stop when AP
connected by peer station.
Condition:
STA + AP 5G (connected) + AP 2.4G skip 5G scan
STA + AP 5G (connected) skip 5G scan
STA + AP 2.4G (connected && 2.4G only) skip 2.4G scan
Others concurrency skip none
Add ini ch_list_trim_conc to enable/disable the feature. Default is
disabled.
Before send WMI_SCAN_CMD to firmware, call API
policy_mgr_scan_trim_chnls_for_connected_ap() to check if need
trim scan channel list. Which channel list need be trimmed
Change-Id: If4d1cf7347f757fb013ffcb4016e8e6f16859f42
CRs-Fixed: 3075068
- Add MLO Quiet IE related parameters in ml_bcn_partner_info structure.
- Populate MLO Quiet IE related parameters in the beacon template.
Change-Id: I5a4a069d067bdbc5e7c44c407f51a504e9aba151
CRs-Fixed: 3088019
Parse the per-STA profile IE and save the CSA, eCSA, Max Channel Switch
Time IE pointers in partner_link_info structure.
Change-Id: Icac75e3ad1f45bd5325c9144db7732684ebb4512
CRs-Fixed: 3087692
The two api have different result for country ie empty AP case
at present:
scm_is_bss_allowed_for_country : allow ap with empty country ie
reg_get_6g_power_type_for_ctry: disallow ap with empty count ie
Add check empty country IE in scm_is_bss_allowed_for_country
to align reg_get_6g_power_type_for_ctry.
Change-Id: I8c929bf0befa691f60861ceb8c63827cde400ae9
CRs-Fixed: 3093481
