This change includes below
1) Changes needed to increase Tx rings to 4
2) Use WBM2SW4 ring for rx error in QCN9224
3) memset srng at alloc to avoid populating RBM_id
in per packet path and enable implicit RBM
Change-Id: Icbd5ac2378273b8f3c6adc41c611e29551fff22f
Currently the IRQ mask for tx completion near full
interrupt is not in sync with the tx completion rings
which are enabled for WCN7850.
Fix the mask for tx completion near full interrupt.
Change-Id: I1432191b260094060873406d48e04fde5b7bc35e
CRs-Fixed: 3052650
Some platforms do not support cached descripts for DP Rings.
Add support to set WLAN_CFG_DST_RING_CACHED_DESC to 0 and make
__qdf_nbuf_dma_inv_range as stub if DP_NO_CACHE_DESC_SUPPORT flag is
enabled during compilation.
Change-Id: Ic6b483be25c32f3f3c79b170fb7d7557a232b4ac
CRs-Fixed: 3027649
Currently, rx packet capture events processing happens even
when feature is disabled by ini. This incurs per packet overhead
in rx path.
The fix is to move all the processing from rx path to packet capture mode
component. Send only wdi event from rx path, when feature is enabled by
ini.
Change-Id: I647256b85117cd3373950c78a5a0ae7d6710e4e2
CRs-Fixed: 2969123
Add support configure ipa tx ring and tx completion ring for
2.4G and/or 5G separately.
Change-Id: Iafb8fa589ff0cce15609a3dfa2209364291d7cef
CRs-Fixed: 2996604
Set default value 7 for INI dp_reo_rings_map, this is just
one WAR to not block HMT before reo_ring_remap and dp thread
issue is fixed.
Change-Id: Ib2c8ebab936951798112759e1ac0baba85996036
CRs-Fixed: 3005555
The following configurations are changed
- Change numer of WBM2SWRELEASE rings from 7 to 8
- Use configurable RBM value when enqueuing packets for TX. This is needed
since WBM release ring numbers do not have an easy mapping to RBM values
for HMT1.0.
Change-Id: Idcf9e48e00b7039331fc1837bb1e900b12f19eb3
CRs-Fixed: 2984362
In dp_service_srngs, the current logic assumes that WBM2SWRELEASE ring
number as obtained from interrupt_ctx->tx_mask matches the index of
soc->tx_comp[] array. However this may not be true, esp for HMT.
Add logic to fix the same.
Use a separate macro to enable use of single TX ring.
Change-Id: I1bee27b800ad4e4ab1a1fe5e2b01b5b43acfe1f7
CRs-Fixed: 2984362
PATCH[7/7]:
This patch consists following changes:
-Conditionally compile all monitor destination ring related code
Macro used QCA_MONITOR_PKT_SUPPORT
-Add QCA_ENHANCED_STATS_SUPPORT macro to conditionally compile
enhanced stats support
-Use QCA_MCOPY_SUPPORT and QCA_TX_CAPTURE_SUPPORT macros
to conditionally compile MCOPY and Tx capture features
respectively
-Use QCN_IE macro to conditionally compile BPR
feature
-Use QCA_ADVANCE_MON_FILTER_SUPPORT macro to conditionally
compile advance monitor filter feature
-Fix vdev attach issue for special and smart monitor vap
-Fix status ring initialization issue.
Change-Id: I0deaa28a9a54bf34b0f41e6dd510fdd8d4992db2
CRs-Fixed: 2983780
WCN7850 has support for near full indication for
the consumer srngs. This interrupt is used to take
preventive actions to avoid ring full watchdog irq
trigger.
Register for the near full irq and add the necessary
ext groups for these near-full irqs.
Change-Id: Ic16381fceabc54e6c52b34dd13abea74cad4d38c
CRs-Fixed: 2965081
Currently IPA tx buffers are fixed at 1007 buffers.
Adding INI support to change number of TX buffers at load time.
Change-Id: Ide0357554f34759198276b9699e0e6f4a3e20051
CRs-Fixed: 2957916
Beryllium targets have more number of HW rings.
Add INI changes to allow increase in number of rings.
Change-Id: I73d779334601d3a1c2aefcade1dcf9dd0f2ef761
CRs-Fixed: 2891021
The current limits of DP RX packet drop thresholds are huge;
In scenarios, where the processing of RX packets is slow, huge
number of packets will be held in the memory and could eventually
lead to out of memory issues. Reducing the thresholds to address
the problem.
Change-Id: I76a2622fb30cda615aeb27fcc9c8e548ffec3e51
CRs-Fixed: 2941885
Provide multiple combinations to configure the msi interrupts
of DP and CE based on the number of MSIs available in the platform.
Number of MSIs used for CE and DP can be changed by modifying the
MSI assignment table in platform driver. Best possible mask for that
MSI is automatically chosen based on predetermined settings.
Change-Id: I02b44fb033631d69d97f2d8d2d3f698541d37aad
As part of WiFi ini clean-up FR, the ini gReorderOffloadSupported,
is identified as an obsolete parameter. Hence it is deprecated.
Change-Id: I7d5ef3b77eb90ccbad1f84ec7d3cce1df761af15
CRs-Fixed: 2896016
SON makes use of smart monitor mode even in case of low memory profile.
Therefore enable rxdma1 in order to support smart monitor mode for
low mem profile.
Change-Id: I9692d55055ba93805475d05c4aff37b67aca1063
CRs-Fixed: 2902650
Update default values of INI items to most commonly used values
in WCNSS_qcom_cfg.ini file on commercial devices.
Change-Id: Ie3a4ce2cbf4bc2352d5ebc5be939a47818a6d594
CRs-Fixed: 2874759
Change the value of WLAN_CFG_RX_SW_DESC_NUM_SIZE_MIN from 4096
to 1024, so that the rx descriptor number can be configured in
the config file of target.
Change-Id: Iedbbf3cbbfd92dc3d955e0e67aac362afbabed45
CRs-Fixed: 2862285
In existing implementation, for monitor mode below allocation
are done at pdev attach and init time.
a. 64 monitor buffer allocation for RxDMA monitor buffer ring
b. Link descriptor memory allocation for monitor link descriptor ring
This memory is waste of memory for customers not using monitor mode and
low memory profile.
To optimize this memory, allocate all buffers and link descriptor memory
at monitor vdev creation time.
Change-Id: I873c76d2f625a782532a101037915b0353928a5b
CRs-Fixed: 2829402
Some AP disables AMSDU in BA256 mode, this has draw back
with KPI in HE mode, so leave a config field to use 64 BA
forcibly to make high KPI with these types of AP
Change-Id: Ia69ffe118fd5bbda78cfb98126a483fcf305294e
CRs-Fixed: 2828304
This reverts commit Change-Id: I98f8f751dc75a3d6f2296f0844529e9c72c4090b.
This INI is moved to HDD_DP.
Change-Id: I451fa50621fdc8b6cbe027bdf1495788914481c9
CRs-Fixed: 2824623
Number of DP rings used in HOST mode and NSS offload mode differ
and in current scenario the rings are allocated unconditionally.
Allocate only required number of rings based on the HOST mode and
NSS Wi-Fi offload mode and based on the number of radios supported
per SOC.
CRs-Fixed: 2790504
Change-Id: I20ce1908da47c197ea3b406f8704b964f3d8f7d1
Add cfg_dp_sg_enable to get ini key dp_sg_support by cdp_cfg_get.
And add some comments for CFG_DP_SG to clarify more.
Change-Id: I34de242eacbdcf55398afe64b91f5534f205fa22
CRs-Fixed: 2822536
As monitor mode is not supported on LM256 profile,
disable rxdma1 functionality on same
Change-Id: I64e5de02d56801bfd46e32a6c64a1286e4d7ecb0
CRs-Fixed: 2819904
Add INI support to enable the feature of sending
ICMP packets to FW at regular intervals.
Change-Id: I888bb2f65e8a497c3e6541f213def905d6dd0727
CRs-Fixed: 2813169
Add a ini control field to control rx frame pending check
logic in WoW case. In some cases, power consumption is more
important than rx frame ping loss, so add a control flag
Change-Id: I8c4d3725edddb82a0f06dc70c22a8dd5243209f2
CRs-Fixed: 2806786
Add support to configure REO ring threshold through ini
for WLAN_DP_PER_RING_TYPE_CONFIG feature.
Change-Id: I02a14adcf243905ab25c2af12cb9499f32ff453f
CRs-Fixed: 2789147
The number of DP data rings are configured through INI
files and the default number of rings are defined by macros.
Default macros for DP data rings are defined twice, hence
remove such duplicate macros
Change-Id: I62927751731b88ce74c4f2651aa74c19b301b89f
In addition to firmware capability, add INI param to decide FST
placement in CMEM.
Change-Id: Icc5fdfa49e35665b59efce3fc1f1855d84c16140
CRs-Fixed: 2778898
