Set the number of layer mixer for each wb mode based on the
current mode hdisplay width. If the hdisplay width of current
mode is greater than the maximum layer mixer width of HW supported,
set dual layer mixers for this mode and check if the split
hdisplay width is an even number.
Change-Id: I0190830ed559f008f9e2c0752858ddc5e7cb83cd
Signed-off-by: Lei Chen <quic_chenlei@quicinc.com>
This change adds the include for <drm/drm_edid.h> required
for the display driver in kernel 6.0.
Change-Id: Ie4c765900a1ae13e1fbb56e458109b725b36748d
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
This change adds support for new dynamic QoS mode for WB rotation
which is required to achieve rotation output available at required
rate to meet real time use case. Though traffic shaper can be
disabled in dynamic QoS mode, part of traffic shaper algo to track
WB operating speed is enabled and WB generates creq priority
based on current ouput rate compared to targetted ouput to help
meeting real time use case requirement.
Change-Id: I98c2dcae53f1b175dc49b40238b9da33e95717a6
Signed-off-by: Prabhanjan Kandula <quic_pkandula@quicinc.com>
MDSS 10.0.0 HW supports rotation of input image with
writeback HW but output color formats are restricted to
32 bit uncompressed A5X tile formats. This change exposes
the supported WB output color formats to client for WB
rotation usecase.
Change-Id: Ic52e6ee4ab882b7dad6edd0daa91b593afbcae01
Signed-off-by: Prabhanjan Kandula <quic_pkandula@quicinc.com>
This change installs required drm properties for writeback
connector to implement rotation with writeback hw in mdss.
Change-Id: I85ed359d06ff4bafee85a4bfa5b8a99774311e60
Signed-off-by: Prabhanjan Kandula <quic_pkandula@quicinc.com>
Expose the number of cdm blocks available through the connector
capabilities. Add CDM to the topology_control table, so usermode
can use the property to reserve the CDM block during modeset.
Additionally, fix a error code return during CDM block reservation
failure in sde resource manager.
Change-Id: Ib42ca4e8614076a8e5df77d8abc77a9e73674390
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Currently a boolean variable is used to track if the system
cache feature is enable for a particular SCID.
This change converts it to use a feature bit instead.
Change-Id: I8461fd9fb837b871c4ac5c67a9ab7613aadea7bb
Signed-off-by: Amine Najahi <quic_anajahi@quicinc.com>
Static display usecase uses concurrent writeback path to compose the
layers and updates the primary display in the next cycle with cwb
output. Use LLCC_DISP scid for system cache in cwb path, to keep it
in sync with the legacy static display path. Use LLCC_DISP_WB for
the offline-wb path. Expose the writeback connector cache property
only when either or both the cache types are enabled.
Change-Id: I8ca4b14828a14ce0bde829136fb4baef272166aa
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Add support to parse and configure QoS values for offline writeback.
Expose a writeback connector property to allow user-mode to set
the usage type of the writeback block - WFD, CWB, offline-WB.
Change-Id: I864f79c4896ec757ac2d8b0f57a6a5775d164f21
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Add changes to configure the downscale blur hardware block based on
the conifgs set by user-mode. Program the ctl's writeback flush and
active bits when dnsc_blur is enabled. Bind the pingpong block that
feeds pixels to dnsc_blur hw block. Disable the active bits and unbind
the pp block binding during wb disable.
Change-Id: I1961ab437e344b13d0c186c1675a5bf79b84ea74
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add downscale blur connector properties to expose the hw block count,
downscaling filters used and the ratios supported. Add a custom dnsc_blur
property to allow usermode to send the required configuration to program
the hardware. Expose only for the virtual connector as the dnsc_blur is
only supported with writeback block.
Change-Id: I35dd263d9d5aafdb59bacbb3a0528ffd2bcaf6a3
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add a custom cache_enable property in writeback connector to allow
user-mode to control the cache setting on a frame basis. Configure
the hw and activate/deactivate the llcc based on the property. The
custom property is added based on the availability of the system
cache for writeback.
Change-Id: I812b31955eb36c75c33ac279b56502a13f7cdcbf
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add a writeback connector property EARLY-FENCE-LINE to give usermode
the control on when to trigger the retire fence. This option is useful
in 2-pass composition, where the writeback triggers the retire-fence
early based on the prog-line which allows primary to start the fetch
before wb transaction is fully completed. This helps to keep the clks
and bw low. WB hardware generates the line-ptr-irq when wb output reaches
the configured prog-line. Retire fence is triggered based on the irq by
default and wb-done handles for cases where line-ptr-irq is missed.
Change-Id: I20867979693dc3447f77da24cd7e88305947fb6d
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This change enables support for wb1 in ctl path and
adds irq support.
Change-Id: Iebbe35725aa279b8e02217ea93ba1b481f5e869f
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Move all the individual boolean flags from HW catalog into a
"features" bitmap. These flags are used to specify support of
various target specific features.
Change-Id: I2334b3b873f3737f91bbae4ef576408247710156
Signed-off-by: Steve Cohen <quic_cohens@quicinc.com>
This change adds logic to determine dsc switch based on
the connector property "CONNECTOR_PROP_DSC_MODE" and
performs seamless DSC switch if there is any change in
DSC configuration. The connector property is populated
in msm_sub_mode based on which suitable mode is selected.
Change-Id: Ifc4931f16dfb814781bc1d72b103e09103e6bfee
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Writeback connector gets the available modes from the default
DRM Display Monitor Timing (DMT) modes. However, wb connector
now supports 5k mode. This change adds support for adding this
mode to the connector mode list by creating a custom wb mode
table. This table can be used to add new modes in the future.
Change-Id: I4b164e44b817b904aa7d6b5cff22c006a071c057
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Add cwb dither support.
Catalog: Read dtsi value of cwb dither in pp parse part.
Wb: Install blob property for cwb dither.
Wb hw: Adds a new wb ops function to program cwb dither hardware.
CRTC: To ensure that userspace can check whether cwb dither is supported,
added "has_cwb_dither" to sde kms info.
PingPong: In order to reuse dither's map array, move dither_depth_map array
to pp header file.
Change-Id: I77e6a052a00b7c649452103145e5d7b4c8deb3a2
Signed-off-by: Yuchao Ma <yuchaom@codeaurora.org>
This change adds support to enable maximum output line width of
5120 for wb connector.
Change-Id: I25d34e804cbf16af9eb9f78cd4146fa2023ff935
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Allow caller to specify the default value of the enum
property while installing with msm prop layer. It is
not always the case that the default value to be the
first entry.
Change-Id: Ie0bb1ad7479e3e07810b3d817fdf618b1935858c
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
This change adds support for enabling WB maximum linewidth
based on color format is linear or UWBC.
Change-Id: Icc71eb14b3156e06036a4a82029d9d7a5c89e909
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Make msm_drm into single module and all child driver
registers and unregisters are handled from parent's
register and unregister respectively.
Change-Id: I017513d1de3b6b25dd5543d7fa7741c0bac1740d
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
This change enables display drivers code compilation
for lahaina target and current location of header files
is replacing the header files in usr/include/drm directory
before installing display specific header files. This change
ensures both the drm and msm_drv header files are exported
to user mode clients.
Change-Id: If6fc347598b902e670b7206dbcb82fe0740b3984
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This snapshot change adds downstream support
for drm 5.x+(msm_lahaina branch) linux kernel.
Change-Id: Ia691c95da155a00e449c91a2f1a5b20a8e71aed4
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Create a data structure to maintain available hardware resources
and track capabilities. This data structure is used to send
the current available resources and caps information to
connector ops get_mode_info, get_modes and validate_mode to
process the display mode.
Change-Id: If38fc628ee5ab4729821f88c0050ab45375187b8
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Writeback modes are passed from DRM driver client and it may provide
invalid configuration. Add null checks for sde_wb_config provided by
client to avoid null access in subsequent calls.
Change-Id: I0924f8907d98e2ecb891cfc0c09191823d9033e8
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
