Add cfg to configure the max number of links supported for mlo sta
connection.
Add cfg to configure the band bitmap that mlo sta connection supports.
Change-Id: I6b27a7eb13eff026c5123e4bd24ba2424dba781d
CRs-Fixed: 3202029
With this change add support for new ini ConDTIMSkipping_MaxTime
to set max modulated DTIM in ms.
Change-Id: I89ce2b5074ce75a1701365b5d09d8ed0244aeeef
CRs-Fixed: 3038346
Currently, wakelock is only taken during initial connection if
pairwise key installation is pending and not during roaming. This
may lead to EAPOL delay/timeout during roaming as runtime pm and
suspend is allowed during roaming. To fix this issue, acquire
wakelock if key installation is pending during roaming.
This change also refactors the code and release the wakelock in
wma_remove_peer if EAPOL fails during initial connection or roaming.
Change-Id: Id4cac30b3c383ca3d3e963571846f8a30eaa1006
CRs-Fixed: 3189799
When verifying WNM BSS transition function, it's possible to
ask peer STA to transition across multiple band. Some vendor
BTM implementation is needed to check country IE to get all
supported band channel info. Without full channel list in
country IE, it cannot make a transition across multiple band.
To solve the interop issue, let country IE take all supported
band channel info when the specific vendor OUI is detected in
association request.
Change-Id: I78dd4b88937277b54a7da4d72d8a94706965e9a6
CRs-Fixed: 3196957
Call enable/disable link APIs from connect/disconnect/roam etc.
Cleanup policy_mgr_handle_sap_mlo_sta_concurrency and
policy_mgr_handle_sap_plus_ml_sta_connect API as
policy_mgr_handle_sap_cli_go_ml_sta_up_csa and
policy_mgr_re_enable_ml_sta_on_p2p_sap_down will take care of
ML STA + SAP/P2P cases.
Also optimize policy_mgr_handle_ml_sta_link_concurrency to consider
only ML STA+STA cases and called from connect/disconnect/roam etc.
Change-Id: Ib8b9b2a490832ea5cbe1d86e58009e1437b331b9
CRs-Fixed: 3189685
Add logic to enable and disable number of STA ML link, on vdev UP
and DOWN, if any link is causing MCC with exiting
SAP/P2P and SAP/P2P with traffic type as low latency or high tput.
Change-Id: Id599acf5a07042328917b5e15f077d2decc0ad5f
CRs-Fixed: 3189304
Add support for new ini param RoamCommon_MinRoamDelta. This param
is similar to the existing min_roam_score_delta param but units
change
Change-Id: If04ff2344a2651e7d8d71c92f05dfebc229f9fe1
CRs-Fixed: 3015930
Add support for new ini param RoamIdle_InactiveTime. This param
is similar to the existing idle_roam_inactive_time but unit
change
Change-Id: I857107a6d0e39f373e39d4fb9b762e7cf4c4a9e4
CRs-Fixed: 3015993
Move wlan_mlme_get_wlm_multi_client_ll_caps API to dispatcher
folder so that other components would use this API to get
the multi-client feature capability flag.
Change-Id: Ib247401b9411c40a838b338a60d44cb187884480
CRs-Fixed: 3181381
Currently req->ctx.cb_arg is assigned req memory
in wlan_mlo_sta_mlo_concurency_set_link. and passed to
mlo_ser_set_link_req, where req is again alocated
and req pointer of req->ctx.cb_arg is freed, thus
making req->ctx.cb_arg invalid.
Fix is to avoid allocation of req again and use the
requester memory of mlo_ser_set_link_req as umac_cmd.
Change-Id: Ic96efa204662269fe812c195a3bc8a1da5b215ad
CRs-Fixed: 3188737
Currently mlme_set_twt_peer_capabilities() api is use to
update twt capabilities using he caps and he ops. But now
onwards partial TWT(requestor and responder) can be
supported from 11n mode also.
Make this api as generic so that it can be use for both
11ax and 11n.
Change-Id: Id89e056927a914938efad7116796cbf64b5764db
CRs-Fixed: 3185133
Currently driver does not caches peer nss and it needs this info
for big data stats. When driver receives big data stats command
it always returns nss as 0 which is not correct.
To address above issue, add support to cache peer nss in SAP
mode.
Change-Id: I5152581d7d66b5bf20f6102dcb9edaa4e23b35bc
CRs-Fixed: 3174420
SAE authentication logging events are sent from host
driver during connection as well as during roaming.
But the other roaming frame related stats are printed
as part of the WMI_ROAM_STATS_EVENTID handling.
Since this roam stats event is received after preauth
frame related logs are queued to userspace, the order
of the logs are not correct.
Cache the SAE preauth logs in mlme and print them
upon receiving ROAM stats event. Read the firmware
service capability to decide if new caching needs
to be used or legacy behavior needs to be followed
Change-Id: I76381b9deef222f1481325974e2b5d9730eb2b67
CRs-Fixed: 3154147
Add multi-client latency level service bit capability support,
WLAN_SOC_WLM_MULTI_CLIENT_LL_SUPPORT, to check whether the FW
supports multi-client latency level event or not.
Add INI "wlm_multi_client_ll feature" to enable/disable multi
client latency level feature from the host side.
* @min: 0
* @max: 1
* @default: 0
If firmware sends multi-client latency level service
bit capability to host and host enables multi-client latency
level feature via INI, the host waits for an event
WMI_VDEV_LATENCY_LEVEL_EVENTID as a response to a request
command WMI_WLM_CONFIG_CMDID.
Change-Id: I5cbea89e67caabac5db70b7f0a91c18bdd512e9b
CRs-Fixed: 3180928
Add a new field max_mcs_index in mlme_legacy_priv to save max mcs
index of current vdev.
Add a new field max_real_mcs_idx in hdd_station_info to save max
mcs index of the connected station.
Change-Id: I28908515cbe5c18c79f14f8645defd5c82e3a6f0
CRs-Fixed: 3065838
Since HB failed logic change to send deauth, we don't
need probe logic after HB failed. Clean up timer and
unnecessary code.
Change-Id: I26d9235c157065a21469b01abf31751825a1f277
CRs-Fixed: 3158364
Reduce the log level for the frequent acceptable errors
to reduce the roam latencies.
Change-Id: I9f5405025948d160e6fcd65ecca05dce7670ea84
CRs-Fixed: 3150439
Move MLO STA-SAP concurreny handling to Policy Mgr which
is present in CSR currently.
Also, Move MLO STA-STA concurreny handling to Policy Mgr
which was part of If Mgr currently.
Change-Id: I2b8de17c3d31b43ff1f6b81a7de07b88888d7fb5
CRs-Fixed: 3153393
Peer MAC address is not specified when get_peer_by_mac fails.
We should print the peer MAC address with debug message.
Change-Id: I9d75098784879ddecd447f8dbbcd61e6cdc1bf76
CRs-Fixed: 3153776
Add new config to ease scan and connection restriction
in 6GHz band when bss is advertising different country.
Change-Id: I13bd0dbd52fad297b995add8fc8a71d7a058c25b
CRs-Fixed: 3135152
Update LFR2 self reassoc failure processing:
1. remove lim_send_switch_chnl_params() from
lim_restore_pre_reassoc_state() when self reassoc failure
to avoid this race condition: one one hand host let FW do
restart, and on the other hand VDEV sm transition to stop
state. Otherwise VDEV sm cannot handle EV_START_RESP event
correcly.
2. register .mlme_vdev_sta_disconn_start callback with
cleanupTrigger eLIM_HOST_DISASSOC.
3. when self reassoc fail, notify reassoc failure reason
to CM SM so that CM SM can trigger CM_DISCONNECT_REQ, then
invoke .mlme_vdev_sta_disconn_start doing cleanup action.
Change-Id: Icb68202e9f72fcbe3e0e4d3e9006a65a73123692
CRs-Fixed: 3109987
Firmware doesn't expect any vdev commands from host while RSO stop
is happening. It sends a response to the RSO_STOP command once
it's done with cleanup. Host needs to run a timer after sending
RSO stop command to firmware and wait for a maximum of 6 seconds
for the response. Host can stop the timer and allow the commands
to firmware in the below cases,
1. RSO_STOP response with success status
2. RSO_STOP response with HO_FAIL status followed by
HO_FAIL event: Host needs to wait till HO_FAIL event is received
If firmware doesn't send any response in the 6 seconds wait, issue
a recovery to help to check the firmware state.
Also, set WMI_ROAM_SCAN_MODE_FLAG_REPORT_STATUS always when MLO is
supported while sending RSO_STOP to firmware. It's sent only
in case of wpa_supplicant disabled roaming currently.
Change-Id: I8182e60beb9288dba23cc72e978dc781c8ab1707
CRs-Fixed: 3106023
Currently moderate latency level is not used. Rename moderate
latency level to XR latency level to be used in XR applications.
Change-Id: Ia7f65c3565f6704b9571161aabefb3a8b47cce1e
CRs-Fixed: 3116839
Currently regulatory channels are disabled for
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT vendor command
event if ini coex_unsafe_chan_nb_user_prefer is not set and if
STA operates on disabled channels which results in crash for
STA interface in STA + SAP SCC case.
Hence coex_unsafe_chan_reg_disable ini is controlled based
on coex_unsafe_chan_nb_user_prefer.
Ini behavior summary:
|----------------|----------------------|-------------|--------------------------------|
|User prefer ini | Reg chan disable ini | PLs | Expectation |
| | | | |
|----------------|----------------------|-------------|--------------------------------|
| 1 | 1 | LE | accept freq ext command and |
| | | | disable the regulatory channel|
|----------------|----------------------|-------------|--------------------------------|
| 0 | 0 | Non-Pixel SP| reject freq ext cmd driver and |
| | | | returns NOT SUPP |
|----------------|----------------------|-------------|--------------------------------|
| 1 | 0 | Pixel SP | accept freq ext command and |
| | | | Don't disable the reg channels|
|----------------|----------------------|-------------|--------------------------------|
Change-Id: Ia3acbc133cab4865d8ad69992e893be91439f856
CRs-Fixed: 3128908
Before MLO sta partner link is up, FW can't indicate CSA event to host.
For this case, host need save csa parameters and process it when MLO
sta partner link is up.
Change-Id: I543c5e1069af5b1e88c6619364a7a44330134d2c
CRs-Fixed: 3082437
Update latency flags inis to 64-bit configuration and use
lower 32-bit for firmware configuration and upper 32-bit
as host configuration. Also remove separate inis for host
latency flags.
Change-Id: Iff62b847f40ae7fa5f82948ec37d756144860474
CRs-Fixed: 3115853
TWT initialisation will fail for each non 11ax connection
so an error log is not needed if peer object for TWT is not found.
Also, RIC data is not mandatory in FT session, so if its not
present, log a debug level print instead of error level.
Change-Id: I7fec9f88aa68b2ae947e34a1aede311e9fed2d05
CRs-Fixed: 3117535
Intersecting EHT beamforming configuration from ini and FW
indication, then save it to eht caps of mlme.
For sta, update mlme EHT beamforming configuration to FW
through WMI_VDEV_PARAM_SET_EHT_MU_MODE directly.
For ap, intersecting mlme EHT beamforming configuration and user
configuration, then send result to FW.
Change-Id: I3d6185896af9fc58eb1fb6db913d4a425f72c696
CRs-Fixed: 3113235
Currently coex unsafe freq event is honored from firmware using
"wmi_wlan_freq_avoid_event_id".
As per requirement, add ini to don't honor coex unsafe freq
event from firmware and use the coex unsafe freq list from
vendor QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT.
Change-Id: Ia3acbc133cab4865d8ad69992e893be91439f705
CRs-Fixed: 3114742
For MLO Roaming,
- RSO offload commands will be sent
to FW only on assoc vdev.
- Add new state for link vdev, will be
used only during roam sync.
Link vdev RSO state change : DEINIT -> MLO_ROAM_SYNCH -> DEINIT.
Change-Id: Ifb89e23fc48356ec8f0bc6a045f2dd4d81038076
CRs-Fixed: 3098570
Currently in SAP mode, when host driver receives disconnect for
station, first it gets disconnect stats with serialization command
and then it sends delete peer command to fw. There is an issue with
this approach, if there are maximum number of clients are connected
to a SAP and all of these clients gets disconnected at the same
time, in that case there will be a disconnect stats command and
peer delete command in serialization, because of which serialization
queue gets full.
To address this issue, remove disconnect stats command from
serialization and send this command just before sending peer
delete command once peer delete command gets serialized.
Change-Id: I2fa1a5a393939eebbce796e11348fa7c040b40e8
CRs-Fixed: 3100914
Currently, MAC address update is supported only when interface is down.
Because of this framework needs to issue interface down and interface
up to update the MAC address. Interface down and up will lead to VDEV
delete and VDEV create commands to the FW.
To optimize Host-FW interactions during set MAC address, add support
to update the MAC address without bringing the interface to down state.
Change-Id: I76afa8f8c2504e8271bf689392d526f994afff0a
CRs-Fixed: 3063201
Besides MLO, legacy mode 6G SAP + 5G(2G) SAP are going to support RNR
IE. Move RNR related flag from MLO to private mlme component.
Remove mlo_rnr_updated in struct mlo_link_ie_info.
Add notify_co_located_ap_upt_rnr and related API in mlme_legacy_priv.
Change-Id: Ife86d1ed2fe8b633f6167750053b2aff37911299
CRs-Fixed: 3092483
Handle SAP and MLO STA concurrency such as:
1) If MLO STA is present with both links
in 5/6 Ghz then SAP comes up on 2.4 Ghz,
then Disable one of the links.
2) If there is channel switch for sap from
2.4 ghz to 5 ghz, then enable both the
links as they were disabled by previous
operations when sap was on 2.4 ghz.
3) If MLO STA is present with both links in
5/6 Ghz and SAP, which was present on
2.4 ghz, stops then renable both the as
one of the links were disabled because
of sap on 2.4 ghz.
Also, in case where MLO STA roamed from
5 + 6 link to 2.4 + 5/6 link force scc
will happen and the disabled link has
to be enabled.
Both links should only be enabled if mlo
sta has more than one links.
Change-Id: I0fd0093b20336ae32325981589c399b44a44b64e
CRs-Fixed: 3092202
Add INI - mgmt_frame_hw_tx_retry_count to configure MGMT
frame HW tx retry count for certain frame types.
The INI String format:
frame_hw_tx_retry_count="<frame type>,<retry count>,..."
The supported frame types are defined by enum mlme_cfg_frame_type.
Retry count max value is 127.
For example:
mgmt_frame_hw_tx_retry_count="0,64,2,32"
The above input string means:
For p2p go negotiation request fame, hw retry count 64
For p2p provision discovery request, hw retry count 32
Change-Id: I32f6c7d83ede9b28484c7a0b29824bde32e06422
CRs-Fixed: 3082532
Add ini support for tx_retry_multiplier and send
tx_retry_multiplier to fw as PDEV_STATS_TX_XRETRY_EXT
pdev param, so that fw can multiply the counter by the
percentage provided by user.
Change-Id: Ie2f06dc3aaa4a161a451b68abd085cc1537eb468
CRs-Fixed: 3066799
Add new vendor command to enable the roam events stats from the
driver/FW in both resume and suspend mode.
New roam param is introduced to indicate the FW to enable/disable
the roam stats using the new roam set command.
Change-Id: I6d04f0946e6735613a4cf3d4361bf31052314fa0
CRs-Fixed: 3036518
When a sta is being steered, sending a deauth may interrupt the
association/EAPOL handshake on the new BSS.
Do not kickout sta if it is being steered.
Change-Id: I15dd26bca27699087cdb790de8cb95281dade385
CRs-Fixed: 3042990
Host sends the EXT CAP IE based on the capability
coming from the supplicant in join request. But, after
roaming the cached join request will be freed. Therefore,
after roaming few capabilities sent by the userspace are
not saved and therefore lost in reassoc request.
Save the EXT CAP IE from the join request in the VDEV
and use the cached capability for sending Ext cap IE.
Change-Id: I71947388b4c6e9e56a5832557416d9b462de70e2
CRs-Fixed: 3038496
Currently WMI_DBGLOG_TIME_STAMP_SYNC_CMDID command sent
every 1 sec causes RTPM collapse and inturn has power
impact. So to avoid this enable time of the day synchronization
only after connection/roaming.
Send WMI_DBGLOG_TIME_STAMP_SYNC_CMDID as part of RSO
start command.
Change-Id: Iee3cefe1318a6e5507a43cefb9666cc2a439fe06
CRs-Fixed: 3060762
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: I6973d9c366ec6a9c6164dd19f6f4775dd3ebf5f0
CRs-Fixed: 3049942
After mac randomization, the change interface causes
the WTC mode to be reset as part of the hdd_init_station_mode()
Initialize the WTC mode during start modules as part
of the mlme component cfg values population.
Change-Id: I4a57c29053f0100c14cef067952d49cecbdc8ea5
CRs-Fixed: 3047594
There are duplicate macros for the same purpose, hence
replace WLAN_ALL_SESSIONS_DIALOG_ID with TWT_ALL_SESSIONS_DIALOG_ID.
Change-Id: I63130869eed8dffcce85fe6a04586592ab3eaca2
CRs-Fixed: 3047686
Update operational rates set, extended operational rates set
and MCS based rates set in VDEV MLME legacy priv object on
connect success.
Refine the APIs for fetching these rates.
Change-Id: I7697b3d2e26e2fc565a2e672afe19f255af89d7e
CRs-Fixed: 3044036
Add ini configuration to limit supported TX/RX HE MCS rates.
In case of XR use-case, higher throughput is not needed but
higher reliability is expected. So, this ini provide option to
limit HE MCS rate capability to MCS0-7 to achieve higher reliability.
Change-Id: Id6343f5b28d341e5ee377d11ad8420e3b8ded6ef
CRs-Fixed: 3033342
Restrict the dequeue logic to send only 20 logs per second
to userspace. Add check to see if queue is empty before
trying to dequeue.
Change-Id: I778556c649d123718cf76c943c5b2ed7f6c6e8e5
CRs-Fixed: 3014554
