Changes added to support multiradio feature.
Included pdev_id and/or vdev_id in required ATF specific WMI data
structures. All ATF commands will be sent with pdev_id and/or vdev_id.
Change-Id: I723a9a6e4a67a417d4aa2b392285dc4afa590a21
CRs-Fixed: 2052786
Currently we are dereferencing hw caps without validation which
may cause kernel panic.
Add changes to validate hw caps before dereferencing.
Change-Id: I642dd4c0db872c4cf3bdff7e5fbccbacc82f307d
CRs-Fixed: 2049122
pdev_id in FW starts from one. Zero is reserved for Soc. But host uses
pdev_id starting from zero. Make WMI changes to take care of this
difference and always provide and accept pdev_id starting from zero at
WMI. Use 0xFF for SoC on host.
Change-Id: I49f481e54bbaeea9359753bc7d3da9092fc9559a
CRs-Fixed: 2045125
For dynamic master channel list, compute per pdev current channel
list as well. Provide API for user to register callback to be called
whenever current channel list for a pdev changes.
CRs-Fixed: 2012415
Change-Id: Ie86a719306178a1c3579c2b534a52a12ec3e0b1d
With linux4.4 definition of seq_printf is changed. New definition
updated in driver applies va_start twice which causes incorrect
output hence definition is updated to make sure va_start is applied
only once. For write operations using copy_from_user to avoid
crash due to accessing user space area.
CRs-Fixed: 2042210
IRs-Fixed: 201729
Change-Id: I4043ab027411d42e15adaf53e6e92ae57aa987c7
TLV header is incorrectly set for coex config command due to wrong
TLV length passed to the set TLV header API.
Fix issue by setting TLV header passing correct TLV length.
Change-Id: Ica3e2468d26bdaed26cade048f4d440c067ad929
CRs-Fixed: 2037499
Add Spectral TxOps and RxOps interfaces in
psoc towards converging the Spectral feature.
CRs-Fixed: 2028657
Change-Id: If5b46fb9d71529060df6e5b242fcc8976fce82f8
1. Add multi radio support for thermal throttling
2. Add TLV WMI support for thermal throttling
Change-Id: I2cdbf9a4acdd9346c0fe3dd24c510885cc8fef8e
CRs-Fixed: 2041264
Add support in utils layer to extract pdev id from vdev id using object
manager APIs.
Use the API to extract pdev id from vdev id received through the
chan info event handler for lithium based chipsets.
CRs-Fixed: 2043869
Change-Id: Ibf1f1f91d505d53219ca9a2f5d94beb8553edfe3
Update enums in WMI service enums that got introduced in the latest
FW headers.
Change-Id: I46f70ff5eb41aee15f8cac784cc85201a3362fca
CRs-Fixed: 2045146
When a new master channel list is created, populate master chan list to all
pdevs. Do not make any assumption on availability of pdevs. Make other
stability and initialization fixes. Also add extra fields to data
structures.
Change-Id: I0a59c41e9425435f6069807a3c5de0b389d8fa5e
CRs-Fixed: 2002892
Antenna gain is per regulatory structure. However we need it in
per channel during transmission. Firmware sends antenna gain per
regulatory rule. Host copies it to per channel structure.
Change-Id: Ia163f46facec03ccd450994acbeb28d1e9f2a111
CRs-Fixed: 2002892
ol_defines header inclusion is invalid in WMI layer.
Remove the header inclusion by abstracting the dependency
with in WMI layer.
Change-Id: I5eb8624605cde20b516a1d8d0c823996c363e119
CRs-Fixed: 2023821
WMI_PDEV_SEND_BCN_CMDID WMI is used to send Beacon from host.
Implement this API for TLV target to send beacon from host
when beacon offload is disabled.
Change-Id: I0b01fb4be349d032622a43a43224680946ecfcd3
CRs-Fixed: 2038176
Add support in WMI layer to configure coex config command for
lithium based chipsets
CRs-Fixed: 2037499
Change-Id: Ib83407524bd3b5cdad28f73a6ccc36d4a0271779
WDS peer event is not supported on lithium based targets. Remove the
population of WDS peer event in TLV.
Change-Id: Ie31e543eb7be40787ab19afec7830178807190ac
CRs-Fixed: 2035040
Requirement is to get CCA from frmware when connection fails due to
assoc/auth/probe response timeout. These are common changes to get
CCA from firmware.
Change-Id: I062343ed065d7b0c38b9e3b24ecfa9851b9b1537
CRs-Fixed: 2031843
Host support for Static and Dynamic chain mask selection.
parse new TLVs from ext service ready,copy tables to
wlan_objmgr_soc object.
CRs-Fixed: 2016643.
Change-Id: Ia4735eb4c7774c381df01f56696e8c86fc6c56ab
Enable WMI_ROAM_SCAN_MODE_FLAG_REPORT_STATUS flag so that firmware
sends status for the Roam Scan Offload[RSO] STOP command.
Change-Id: I2758103e8ca3c49c0fecd3323b619542dbbabf0c
CRs-Fixed: 1111809
Create a timestamp conversion helper that returns whole seconds and
remaining micro seconds, for easier consumption by logging methods.
Change-Id: I5bc40075566485f3dc9f7e5fd81a13ec462c5da0
CRs-Fixed: 2031564
Make the following TLV WMI layer changes related to 160/80+80 MHz
functionality:
- While forming the VDEV start/restart command, if the request from
the upper layer indicates the dfs_set_cfreq2 flag, then enable the
WMI_CHAN_FLAG_DFS_CFREQ2 channel flag. This is needed in order to
enable radar event reporting for the secondary 80 MHz segment.
Make this change only in the WIN specific implementation of
copy_channel_info(). If required for MCL, to be handled separately.
- Move the 'peer_bw_rxnss_override' member in
'struct peer_assoc_params' to outside the '#ifndef CONFIG_MCL'
section so that it is available both on MCL and WIN. Since
in MCL code peer_assoc_params is initialized to all zeros and
peer_bw_rxnss_override is not set anywhere later, this should
have no side effects.
- While forming the PEER assoc completion command, populate the
peer_bw_rxnss_override field as per the corresponding parameter
sent by the upper layer. This is required for providing override
values of Rx NSS for bandwidths higher than 80 MHz.
Testing:
- Tested on QCA8074 that the WMI_CHAN_FLAG_DFS_CFREQ2 channel flag
is being set in the VDEV start command if the secondary 80 MHz
lies on DFS channels (tried VHT160 and VHT80_80)
- Tested on QCA8074 AP and STA that the peer_bw_rxnss_override
value is being set in the PEER assoc completion command to
indicate Rx NSS value 2, when NSS value 4 is used for <=80 MHz
(tried VHT160 and VHT80_80). Also tested ping.
Change-Id: Ic45d80567eeed3707f76e513f772ce4da71d6ee0
CRs-Fixed: 2022037
WMI RX event processing is very critical for WLAN driver and today
we are using kernel's shared event work queue. Shared event work
queue is used by many drivers and if any work submitted in shared
work queue takes longer time to finish then it directly impacts WLAN
control path processing.
Define a dedicated work queue for WMI RX event processing and use
it for WMI RX event handling.
Change-Id: I8ee6ca5b4b20c3357d46f8b56943078a0a76977f
CRs-Fixed: 2029775
Create output agnostic log print APIs for WMI and Credit History to
enhance the debugging experience.
Change-Id: Ie89a9cb3b54c373ac2610d62003e940da17696d8
CRs-Fixed: 2028762
Update correct format specifiers in ll_stats_get_req. req_id is an
unsigned integer, use %u instead of %d.
Change-Id: I06a1b571954dcf7392e41901bda51aeea99731de
CRs-Fixed: 2018087
Handle failure scenario for qdf_nbuf_map() API by freeing
allocated memory, returning failure/error etc.
Change-Id: I493fb063c8f57e38525e2dc1701a6e972d2ec0e6
CRs-Fixed: 2028524
Extraction APIs for few WMI events were implemented, for which the
TLV event ids need to be populated.
Populate TLV event ids for the following events -
WMI_PDEV_CHANNEL_HOPPING_EVENTID
WMI_PDEV_TPC_EVENTID
WMI_WDS_PEER_EVENTID
WMI_PEER_STA_PS_STATECHG_EVENTID
WMI_INST_RSSI_STATS_EVENTID
Change-Id: I3defb120b9bd5a2fa3fdad1b84d201727c0b3f30
CRs-Fixed: 1115239
Converged FW has few left-over WIN specfic WMI CMDs that need to be
implemented in TLV method.
WMI CMDs implemented through this change -
WMI_PDEV_SET_QUIET_MODE_CMDID
WMI_PEER_MCAST_GROUP_CMDID
WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID
WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID
WMI_PEER_BWF_REQUEST_CMDID
WMI_PDEV_QVIT_CMDID
WMI_PDEV_SET_WMM_PARAMS_CMDID
Change-Id: Ia2ae3d2e56608fd4c51754ae2c78f2b9912d7172
CRs-Fixed: 1115239
Fix the population of tx power. Also fix the WMI TLV processing
for regulatory channel list event. Also make sure correct
range enums are calculated for pdev range.
Change-Id: Iec9559c0ab4b2b5e52d0b0a3eb4a0e8d038dc791
CRs-Fixed: 2002892
Add pdev_id extraction code for FIPS, TPC and channel hopping WMI
events. pdev_id is used to derive pdev object.
Change-Id: I1ed527cd96cb6f2326202d1a37ab43285f050a72
CRs-Fixed: 2003898
Add new API to unregister event handler to allow
converged components to move to common eventid space.
Change-Id: I97f096ff3e36bc7923718498c535fb6c3c50e7e7
CRs-Fixed: 2023157
Emulation being clocked at lowest rate,
SCAN and serialization timers are modified to handle
these scenarios
Change-Id: Ia937930483dbcd0268fd2fe2d0393e49f09b215f
CRs-Fixed: 2009490
Due to different layers, TLV processing is confined to WMI folder.
Therefore, move the TLV layer processing of WMI_REG_CHAN_LIST_EVENTID
to the wmi folder.
Change-Id: I7e7182997a9506035030f33d2f81a403fbe97a2f
CR-Fixed: 2019750
