In roaming path, while processing roam synch indication info/err
prints at the driver adds up latency to the total roaming
transition time and the KPI for maximum transition time exceeds
the expected 100ms. The printk buffer is protected by a global
raw spinlock for readers and writers. This restricts the contexts that
are allowed to access the buffer. So large latencies exists when
printing to kmsg done with QDF trace levels WARN, INFO, ERROR.
Change the redundant/less significant info, error, warn level
prints in roaming path to debug level.
Change-Id: I8e2a03ddef8f3cd680263939f6e0275b8703e681
CRs-Fixed: 2597624
Scenario:-
1. Turn on SAP and STA on 2.4ghz and 5ghz
2. Turn off SAP
3. Turn off STA
4. Turn on SAP on 2.4ghz
Issue:-
In the start ap function, the driver calls
the stop opportunistic timer and calls the handler
to goto SMM mode.
After this, the SAP checks whether it requires the
DBS or not and then requests for DBS also, but since
the driver is already in DBS mode this command gets
rejected, so there would be 2 commands in the serialization
queue which would be SMM and start AP, which would lead to
a crash as SMM is sent before a connection on 2.4ghz as
Hastings is not capable to start a vdev in 2.4ghz without
DBS mode.
Fix:-
1.Not allow SMM if the current connection requires DBS
2. Check the HW capabilty in the active command only and
not before that to protect the reliability of hw mode.
Change-Id: I1c0c05ea05ba14d1556af2612daa3de2ffcba367
CRs-Fixed: 2587508
During mdm SAP+SAP+SAP case, if 5G band is disabled for modem
N79 band, need all 5G SAP switch to 2G to force scc.
when 5G band is re-enabled, all 5G SAP can switch back to 5G.
Change-Id: Ief7d7c85a7881885bd95c8af6be8d4e428d07041
CRs-Fixed: 2597602
6Ghz SAP needs to send either a probe response or fils
discovery at every 20ms.
Add a new ini to configure the probe response or
fils discovery frame.
enable_6g_sap_fils_discovery=1 sends fils discovery frame
at every 20ms.
enable_6g_sap_fils_discovery=0 sends probe response frame
at every 20ms
Change-Id: I6c5fb339135cf11be071d73970ea3704441380eb
CRs-Fixed: 2586524
When roaming is complete, firmware sends WMI_ROAM_STATS_EVENTID
to host driver. This event has details regarding the roam
trigger reason, roam scan and candidate details, roaming result
and 11kv info sent after roaming to AP. Parse this event and
fill the below diag log report to print this in logcat:
LOG_WLAN_AUTH_ASSOC_TX_RX_INFO
LOG_WLAN_ROAM_TRIGGER_INFO
LOG_WLAN_ROAM_SCAN_INFO
LOG_WLAN_ROAM_RESULT_INFO
LOG_WLAN_RRM_TX_RX_INFO
Change-Id: Ie09dc8ad5b236d0925327dba73a3f2e73a80109a
CRs-Fixed: 2597057
If g_enable_go_force_scc isn't enabled, P2P Go failed to switch
to 2G band when 5G disabled.
Fix: Check whether need switch channel for band restriction
first, check go force scc later.
Change-Id: Icf8de51321debea2806585d47d2bd4fc6486075e
CRs-Fixed: 2594279
Currently the BLM does not check the BSSID of
the entry for 0 or broadcast BSSID, and thus
can lead to addition of many entries with such
property.
This would also result in removal of old valid BSSID
entry data, which is essentially required.
Fix is to check the BSSID of the entry for 0
or broadcast, and reject them if not valid.
Change-Id: I2939673a1c4efb1a22e03ffe82121513c071fa4b
CRs-Fixed: 2595331
Firmware sends vdev id allocated for NAN discovery in NAN enable
response. Validate the same and add corresponding entry to
policy manager.
Change-Id: I5e7426c6739620e05480fb90cecdb8ff156fd4cd
CRs-Fixed: 2592021
Framework might not disable NAN discovery explicitly in some
cases like driver unload. So disable NAN from stop_adapter to
terminate NDPs and NAN discovery properly.
Cleanup the API os_if_process_nan_disable_req() by using the
new API ucfg_disable_nan_discovery().
Change-Id: Ic2c834db44c42a44db902c93f67a887de1b6c2fb
CRs-Fixed: 2594318
Currently, framework issues NAN commands on station interface.
But when connection happens, framework does interface down and
up on the station interface due to MAC randomization. This
terminates all of the NAN operations.
So NAN discovery needs a separate interface to avoid dependency
on the station interface. Create an interface "wifi-aware0"
of type NL80211_IFTYPE_NAN based on the firmware capability
and register to kernel.
Framework issues "IF UP" on the new NAN discovery interface when
it enables NAN. Driver shall create vdev and send VDEV_CREATE
command to firmware for the same. Framework shall issue all
NAN discovery commands on this new interface. Driver shall use
NAN vdev for these NAN operations.
Framework shall do "IF DOWN" once the NAN operations
are done(Ex: up on NAN disable).
Change-Id: Ifd1e1ab5ed64cd97edb00e793214edd2a2365274
CRs-Fixed: 2592020
Firmware advertises service capability bit NAN_VDEV_SUPPORT for
separate NAN vdev creation. This capability can be used to create
separate interface for NAN discovery and process corresponding
commands from userspace.
Change-Id: I45573c94ee2d966afc1e207c9eefc146ff43320f
CRs-Fixed: 2592019
Add g_prefer_5g_scc_to_dbs to give higher priority for 5g scc than dbs.
It is bitmap per enum policy_mgr_con_mode.
For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system
preference option, If 5G SCC needs higher priority than dbs, set it as
0x8.
This can make GO have higher TPUT given that STA and ref AP mostly have
low speed at this time. This can improve user experience.
Change-Id: Ib8b4bfeef55d97277843df92d3b82aa7f3b9835d
CRs-Fixed: 2587068
DSRC feature is enabled by SDIO card profile. But when debug SDIO
interface feautre, there are many DSRC module compile issue.
Change-Id: I4429f2a6e68b67140a72ad9634031f459ccda397
CRs-Fixed: 2590115
When SAP is on 5G and STA connects to 6Ghz AP, the "force
SCC" logic will move SAP to STA home channel if SAP is 6Ghz capable.
If SAP is not 6Ghz capable, SAP will be moved to 2G (DBS) to
avoid MCC(5G+6G) for DBS HW and SAP will stay on 5G for non-DBS HW.
SAP is 6Ghz capable only when all of below statements are true:
a. SAP config includes WPA3 security - SAE,OWE,SuiteB.
b. SAP is configured by ACS range which includes any 6G channel or
configured by 6G Fixed channel.
c. SAP has no legacy clients (client doesn't support 6G band).
legacy client (non 6ghz capable): association request frame has no
6G band global operating Class.
Change-Id: I7e9723fd1b679326a3df61932850589e6e503f3d
CRs-Fixed: 2593569
Currently cdp ops are given pdev/vdev/peer
handle as its arguments which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- txrx_data_tx_cb_set
- txrx_mgmt_tx_cb_set
- txrx_mgmt_send_ext
- txrx_pdev_attach_target
- txrx_pdev_detach
- txrx_vdev_attach
- txrx_vdev_register
- txrx_vdev_detach
- txrx_peer_create
- txrx_peer_delete
- txrx_peer_delete_sync
- txrx_fw_stats_get
- txrx_get_vdev_from_vdev_id
- txrx_pdev_set_ctrl_pdev
- txrx_pdev_attach
- txrx_get_vdev_mac_addr
- txrx_pdev_post_attach
- txrx_pdev_pre_detach
- txrx_get_ctrl_pdev_from_vdev
- txrx_get_mon_vdev_from_pdev
Change-Id: Ib8b0b1edd63e7c3f8813b11ca26b50ec121fe255
CRs-Fixed: 2541459
Fix potential race condition issue when the sap_context
of adapter is null and it is accessed in work queue -
__policy_mgr_check_sta_ap_concurrent_ch_intf.
To acquire/release the "sap_context" by get/put API.
Change-Id: I91dacc6d45c377840f7d30f2f9ff902f53ccd8e8
CRs-Fixed: 2592524
Currently, There is no support to disable ring buffer. Each Ring
buffers is using 2MB and overall 10MB is consumed by 5 ring buffers.
Fix is to add ini support to enable/disable ring buffer.
Boolean ini CFG_ENABLE_RING_BUFFER is added. Default value of
gEnableRingBuffer is 1 which indicates that ring buffers are enabled
by default.
CRs-Fixed: 2592476
Change-Id: I30f95668de6df96e5c388e92e202f8c236132dc2
g_pcl_band_priority - Set 5G/6G Channel order
This ini is used to set preference between 5G and 6G channels
during population of PCL.
0 - Prefer 5G channels, 5G channels will be placed before
the 6G channels in PCL.
1 - Prefer 6G channels, 6G channels will be placed before
the 5G chennels in PCL.
The change will only add 6Ghz channel to PCL for SAP or STA
mode.
Change-Id: I51b3073d6f4fb01af72ccb0a50d10822ac115bca
CRs-Fixed: 2590007
When 5G band is disabled by set band, need SAP switch channel
to 2G. When 5G band is enabled again, need SAP switch back to
original 5G channel. When sta connecting, SAP can't switch
channel.
Merge logic of SAP channel switch for band change and for force
scc with sta, both are implemented in:
policy_mgr_check_concurrent_intf_and_restart_sap now.
After sta associate succeed or fail,
policy_mgr_check_concurrent_intf_and_restart_sap is called again
to check and try SAP CSA for band capability change.
Change-Id: I8574209aac3cabb748a8ec05050244f480e1a0e9
CRs-Fixed: 2589021
Reinitialize pcl_weight index in policy_mgr_get_channel_list
for correct connection count.
Change-Id: I96d38f1cb29014517f2c22e360db5d942eb66519
CRs-Fixed: 2589478
Currently, after FINAL_BMISS detection, FW does channel map
based partial scan followed by one full scan if no candidate
found in partial scan to ROAM to another available AP without
disconnection. This results in additional delay by HOST in
issuing disconnection after a heartbeat failure.
Add INI support (bmiss_skip_full_scan) to allow FW to decide
whether firmware does channel map based partial scan or partial
scan followed by full scan in case no candidate is found in
partial scan after final BMISS.
Change-Id: I48f9bb43bb7933e9ff173f618586ea5986530dcd
CRs-Fixed: 2578848
Change max value of tx_bf_cap to 4294967295 from -1
which is misconfigured. 4294967295 corresponds to
0xFFFFFFFF which is max value for 32 bit unsigned
int since this CFG item is getting used as part of
4 byte dot11f HT capability population.
Change-Id: Ifd0fea080dd9eb1f6995af0df20c68e3f73b891a
CRs-Fixed: 2581060
Issue happen when:
thread1:
rmmod driver, wlan_hdd_pld_remove which will get psoc trans.
then try to get rntl_lock in hdd_unregister_wext;
thread2:
trigger iw del interface, cfgops in kernel will get get rtnl_lock,
in wlan_hdd_del_virtual_intf, vdev trans will be blocked by psoc
trans in thread1. as thread1 it is also waiting for rtnl_lock, so
both thread will be stuck.
Fix is:
In psoc trans, vdev trans and vdev ops is not allowed, which should
return directly.
Change-Id: I9cbd04bac438bb9483b4e89e73801fe71859e139
CRs-Fixed: 2583675
In 11D scan procedure if WMI_11D_NEW_COUNTRY_EVENTID event is
received, host processes 11d new country code event.
Host driver as a response sends WMI_SCAN_CHAN_LIST_CMDID
new channel list cmd to firmware.
As a result the ongoing scan procedure is aborted by firmware,
and if the scan was a first scan for connection, then it would
lead to connection latency as the supplicant then have to
scan again.
Fix is to check if any scan is in progress, then delay
WMI_SCAN_CHAN_LIST_CMDID channel list command to FW till
the current scan is complete.
Change-Id: I4e747bb747c32430b5d8024823aa0df4928a8c71
CRs-Fixed: 2569741
Currently, default MGMT retry limit is 4 which means 4
transmissions are supported for any management frame.
In noisy environment, Chances to get connection failure
are higher with 4 retransmissions.
Fix is to add INI support mgmt_retry_max to make
CFG_MGMT_RETRY_MAX configurable. Default value for
CFG_MGMT_RETRY_MAX is 15 to reduce the chances of connection
failure in noisy environment.
Change-Id: Id50cb68813fba517a8a1580a3d6662c73b0a381e
CRs-Fixed: 2575385
Currently in case of STA+NDI+NDI concurrency, the below scenario
can occur,
1) If NDI(NDP) + NDI(NDP) exists and sta tries to connect,
then all NDPs on 1st NDI is tear down.
2) If STA+NDI(NDPs) exist and then another NDI tries to establish
the NDP, then it is allowed in the current driver.
Fix is to reject the 2nd NDI(NDP) if STA+NDI(NDPs) concurrency
already exist.
Change-Id: Iadf6c9e10b9cdd59ca7beaace578a52b5e5dbb0f
CRs-Fixed: 2568552
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the roam trigger reason,
values associated with the trigger, roam scan candidate info,
roam status, roam failure reason.
This helps in debugging/understanding the scenario when roam
failure happens.
WMI_ROAM_STATS_EVENTID Format:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_stats_event_fixed_param |-> Contains vdev id and number of
| roams detail.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_trigger data TLV |-> Has details on the roam trigger
| reason. Number of roam triggers
| TLV detail is present in the
| fixed param. Maximum 5 roam
| per event is supported
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_info TLV |-> Has details on the roam scan -
| scan type, rssi threshold,
| reason.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_channel_info |-> Has details on the roam scan
TLV | channels. Number of channels
| per trigger is found on the
| wmi_roam_scan_info TLV.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_ap_info TLV |-> Has details on Roam candidate
| APs found during scan. Number
| of roam candidate APs per
| trigger is found on the
| on the wmi_roam_scan_info tlv.
| Max 8 candidates are allowed
| per roam scan.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_result TLV |-> Info on roam success or failure.
| Fail reason, if roaming failed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_report_info|->After roaming, firmware sends
TLV | neighbor/btm report to roamed AP
| to get list of roam candidates.
| This tlv provides info on this.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_channel_info|-> This has the info on the
| channel list received as part
| of BTM/Neighbor report.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Print the info received as part of this event into kmsg.
Featurize all the function defines for this roam logging under
WLAN_FEATURE_ROAM_OFFLOAD flag.
Change-Id: Iddc70b572f2e3dc47f08fd1c3c3597cb44981a17
CRs-Fixed: 2576222
In IPA uC ready handler, metering feature and perf level are not
initialized. Therefore properly initialize them after IPA pipes
are connected.
Change-Id: I99621bb2c2831d66e11b0ca903ecb324ef898836
CRs-Fixed: 2582409
Change the default value of normalize weight ini to
disable all non-PSC 6ghz channels for the SAP ACS
operation, and give weightage only to the PSC
frequencies.
Change-Id: I4c8f349a396ffe4a2f378a59f5a67036b9d573eb
CRs-Fixed: 2578824
In multiple NDP peer case NDP indication might come for these
peers before first NDI confirm is sent for first peer. This
results in not updating policy manager session for NDI and
not creating datapath TX pool. Fix this issue by using one
time init flag for NDI instead of relying on peer count.
Change-Id: I812ff9be46580f3fb2da03ae7e1c1a36d205c38f
CRs-fixed: 2573935
If STA is on LTE-coex channel, start SAP on same band, to force
scc, it need select the LTE-coex channel too, or SAP failed to
start.
CRs-Fixed: 2580240
Change-Id: Ib05524711cb2475c3ca5ec7cf61a2b29c05658b6
For SAP/P2P GO on 5G, when receive cmd to disable 5G band when
modem n79 band used, will move to 2G band via CSA.
1. If no active connection on 2G, select ch by safe list, or
channel 6.
2. If there is STA on 2G, force scc with it.
3. If there is SAP/GO on 2G, force scc with it.
4. Handle one race condition that if candidate is already
selected & FW has gone ahead with roaming or about to go ahead
when set_band comes, it will be complicated for FW to stop the
current roaming. Instead, host will check roam sync to make sure
the new AP is on 2G, or disconnect the AP.
5. If 2 SAP on 5G, move both to 2G and keep scc.
When Set band to enable 5G band again, restored all 5G SAP/Go..
Change-Id: I9b2b1ead3b4502022aeefc08359037457bb051f9
CRs-Fixed: 2580204
As part of the new changes, vdev mlme object will be freed before
the vdev delete response is received from the firmware. Hence do
not use the vdev_mlme object in the vdev delete response handler.
Change-Id: Idec5775f6c7ac767baedd173a7bde0d3a358d0fe
CRs-Fixed: 2563381
For Action frame which are not handled, the resp is sent back to the
source without change, except that MSB of the Category set to 1.
so driver may get action frame with WEP BIT set and category with
MSB set.
Due to the error category, driver is not able to determine if its
a RMF frame and thus doesn't add the MIC header and data length to
the frame.
Now with WEP bit set and MIC header and MIC data length not
added to the frame, the firmware assert due to invalid frame length.
Thus reset the WEP bit in the frames sent by mgmt tx path and add
WEP only if keys are set and frame is RMF. Also ignore MSB to get
the actual action category of the action frame.
Change-Id: I2a2918dbb15979e4184dbf8489e5c3ade15d0e6f
CRs-Fixed: 2580233
Currently, RSNE if given from userspace is overrided if the Ini
force_rsne_override is disabled as a security. But there
are sufficient checks already in kernel to validatethe RSNE
given by userspace. Hence this INI is no longer required.
Change-Id: Ifcc9298dcfa035d05e9ee4fb78a4fa2c9f249461
CRs-Fixed: 2573540
With this change,in concurrent mode
(SAP on 5g and peer connected + STA Scan ongoing),
active dwell time 2g is not reset to 0.
Change-Id: I20ace5561137a0dd8def497e3bbbbcbeede80ea5
CRs-Fixed: 2572918
At present, IPA sys pipes setup done before wlan_ipa_wdi_init,
so chances for IPA uC is not yet up and running. As wdi init
succeeds only if uC is up and running, setting up IPA sys pipes
after wlan_ipa_wdi_init succeeds.
Change-Id: I7dcae49db0b0a2114908284379096f39e6f16a50
CRs-Fixed: 2573929
Based on the ini gfine_time_meas_cap, send enable/disable value to the
firmware for STA INITIATOR/RESPONDER mode using VDEV set param.
Change-Id: Idd4142e13061cd1af992bda88d0a0b81edc42fef
CRs-Fixed: 2574050
Currently dual STA is not supported in WLAN IPA component,
where first STA interface info will be overridden by second
STA including iface_ctx and interface registration to IPA
driver.
When second STA is switched to SAP and a ref-client is
connected to SAP, IPA datapath will be enabled for Wifi
sharing feature. But wlan0 interface is not registered
to IPA driver and this will lead to packet drops for
STA on the RX IPA exception path. IPA driver relies
on information such as vdev_id wlan driver registered
to correctly set skb->cb[0] and wlan driver uses
skb->cb[0] to find the correct vdev to pass packets up
to stack. Since STA interface info is not in IPA,
vdev_id for RX exception packets are thus wrong.
Fix is to store multiple STA interfaces in iface_ctx
and all of them are registered to IPA driver.
Change-Id: I745618c22e24b6c56719f8ae5faf653f55b99bca
CRs-Fixed: 2573567
There is a race condition while handling the below scenario,
1. NAN enable request is received from framework.
2. Policy mgr opportunistic timer expired and set hw mode
initiated to Single MAC mode in scheduler thread at
the same time
As the opportunistic timer handler doesn't have any info if
NAN enable initiated in DBS mode, it's configuring the hw
mode to Single Mac Mode just before NAN enable request is sent
to firmware. So the NAN enable request is sent to firmware in
Single Mac Mode which is not allowed by firmware.
NAN enable/disable is also similar to connection in progress
status in case of STA. So provide NAN enable/disable status
through hdd_is_connection_in_progress() to the opportunistic
timer handler. Opportunistic timer handler restarts the timer as
connection(NAN enable/disable) is in progress.
Also set hw_mode_change_in_progress before checking the
connection progress status. This is to avoid a possible race in
the below scenario,
1. NAN-enable sets the state but scheduler thread had read the
state just before that
2. NAN-enable read the hw_mode_change_in_progress just
before it gets set by scheduler thread.
Change-Id: I1a184c84520deb3f6ad1ec010a0fdefda96a5364
CRs-Fixed: 2566841
At present policy_mgr_check_concurrent_intf_and_restart_sap
will allocate memory for sta_ap_intf_check_work_info for each
work scheduling of sta_ap_intf_check_work. Potential race condition
would be the pm_ctx->sta_ap_intf_check_work_info is overwritten
in other thread context which is calling same function.
It is not necessary to maintain the memory
sta_ap_intf_check_work_info dynamically since only one work
sta_ap_intf_check_work is expected to run at same time.
Move the sta_ap_intf_check_work_info memory allocation to
psoc open handler and free it when psoc close.
Change-Id: I29b2f2528a6d537cb853968153340a75fd5fe88b
CRs-Fixed: 2571624
The current function doesn't handle "hw_mode" parameter.
And if band is specified the function needs to find the
correct "phy cap" in mac_phy_cap list.
The "supported_bands" can be a bit mask of
(WLAN_2G_CAPABILITY | WLAN_5G_CAPABILITY), use "&" to find
the phy cap of requested band.
Remove unused API wma_get_phyid_for_given_band.
Change-Id: I4b120d681b820e2a6e2b82f33d67fbcf6136af09
CRs-Fixed: 2571400
Currently the 3 port concurrency combinations
which are not PORed should not be allowed to
connect or beacon as it could lead to functional
issues.
Fix is to bloack the 3 port concurrency which are
not PORed.
Change-Id: I792d0484da96fc0ae994fafa2c6b3ac787016815
CRs-Fixed: 2567322
Currently the offloading of the NS and ARP to firmware is inefficient;
redundant caching is performed even if offload is not sent. This causes
wastage of resources and increases code complexity.
Introduce checks before caching and offload to ensure that the mentioned
inefficiencies are taken care of.
Change-Id: I6013810e1e08adb15c801f4fc21e1b50371bacda
CRs-Fixed: 2569763
Roaming to new AP is depends on the periodic scan which occurs every
10sec in fw. Due to the default value of sticky time (btm_sticky_time)
to BTM AP is 5 min, periodic roaming scan gets disabled in fw till
sticky timer expiry. So FW won’t trigger a periodic scan for 5 min,
in case of roaming to new AP by BTM.
In case if STA roams to new AP by BTM and Disassociation Timer
expires before Stick time, DUT is not able to roam to a candidate
AP till Stick time expiry.
In order to allow roaming just after disassociation timer expiry,
Make Stick time value to zero by default.
Change-Id: I0de09ec7134d543a9c934a03941bcdb57b983dc9
CRs-Fixed: 2566842
Currently the driver uses STR_EDCA_ANI_ACBK_LOCAL as the length
for all the EDCA_LOCAL string cfg items.
Use the corresponding string length for EDCA_LOCAL string.
Change-Id: Ia6fd19b90c3d6c2c6e7a12e9f44389db2bf160f8
CRs-Fixed: 2569514
The max values of the ini's CFG_SET_TSF_GPIO_PIN and
CFG_SET_TSF_IRQ_HOST_GPIO_PIN are set wrong. The default value for those
is higher than the max value.
Increase the max value to accommodate the correct range.
Change-Id: I7d5528801c3b0fc2480e00b28ab4eb8f0385930a
CRs-Fixed: 2570044
Send vdev create to firmware when the mlme vdev create handler
is invoked as part of the vdev object create.
Change-Id: Ibba02f6b5885d7b3a62529ef51768f520395513e
CRs-Fixed: 2555943
