Remove the PRE_SSR blocking notifier call.
This is not required as early down event is not handled.
Change-Id: Ie448fb3af92edd484d282200cf350c6bddc5f99d
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Remove handling for PRE_SSR event.
Move the gpio handling during SSR to SSR UP event.
Change-Id: I2bb1b66db455c6222f1bf12c9e19d7e306a6243a
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Updated the wsa dailink to support 384Khz HS playback.
Picked latest codec fixes to kernel6.0.
Change-Id: Ia570dc3f3ed55415ac374e1ba3bb6f2277dade96
Signed-off-by: Sairam Peri<quic_peri@quicinc.com>
moved compponent inside the #define of WCD_USBSS, to avoid
compilation issue for unsed of WCD_USBSS_I2C in some targets.
Change-Id: Ia2f64182aa8330db10122e70f12066ffebe9d16b
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
While disabling the Decimator, reset the sampling rate to default value.
Change-Id: If07aeb69ddff459d0fdf8dfd4ccb7b3d8ed97743
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Add sysfs parameters to configure xtalk and linearizer
within wcd-usbss for pineapple.
Change-Id: Ie246cb66c1332727b748d648bb7b21a0f4cda377
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
Capture, write, and restore USB-SS registers relating
to the external FETs during zdet to set the proper
configuration for each channel measurement.
Change-Id: I0be46619312b66017993f9ffa5b8eab968e4dda5
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
add check to return from the hs_rem_irq( ) if the headset
removal is already reported.
Change-Id: If9ffc1a471b80f8c9d01875b531748327032926a
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Issue: when we change the UVLO_DEGLITCH_SETTING (0x3460) 6.8ms
and above, we can’t hear any audio playback from the Music app
even at max voltage (4.1V).
HW team suggest to change the UVLO_DEGLITCH_SETTING from 0x1B
to 0x1D and WSA884X_PA_FSM_TIMER0(0x3433) to 0xC0. By these
two settings playback is not getting mute.
Change-Id: I5d2d57c26d7f467ba3d2231f1642f34643f6d716
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Updated FM dailink to btfm_fm_slim_tx to enable FM usecase.
Change-Id: I053f28517dd4a31bdc6e156a6f57de9163a751b8
Signed-off-by: Sairam Peri <quic_peri@quicinc.com>
Use correct Efuse register value for headphone
right-channel impedance calibration.
Change-Id: Ief075b18621dd55d5d636ab5e591b9bf07da5ac8
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
When codec goes into suspend, disable vdd-px which
will cause an unvote in PM.
Change-Id: Ia9f958d67fc57dbf3932733797bce7b0eb742363
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Add impedance detection ramp down timeout after a given interval.
Change-Id: Ia03bc82ec0bb653e6ccd1b6d14c1a9cb996e8ecd
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
Updated the holi machine driver to fetch the max WSA
devices supported from DT and enumarate them.
Added the module init functionality to initialize the
machine_driver during bootup.
Updated the supported dailinks in the holi dailinks
config file.
Change-Id: If7ba9e637818bfdf28cc0786a312592d89a4e17c
Enable wcd939x surge reset routine. Add callback for
the event within mbhc and enable it for wcd939x.
Change-Id: Iabc8c3367ae2eca5982db4526c6860e5eba63b76
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
add support for GND MIC SWAP config for pineapple CDP.
Change-Id: Ia6ecbe2818ac12c7fad5738a78bbdcd4d1611e15
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
For test program < 3, use local default trim values
for harmonium 2.0 version.
Change-Id: I8cdcbe83ddae4626cef1f3dc4bfab3b2c285a0ca
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
Update wcd939x register settings for 2.15V VDD_RX supply
and for 2Vpk and 1.4Vpk modes depending on the headphone
load impedance values.
Change-Id: Iae5e6087fe96d22c9b9f8b755c468d2e6dface4e
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
In lpass_cdc_wsa_macro_config_compander function,
add check for wsa_sys_gain array's index to make sure
it won't go out of bound.
Change-Id: I9d8512726de959e7a0d9e875e966140d70412e25
Signed-off-by: Deepali Jindal <quic_deepjind@quicinc.com>
add mutex for vote_against_sleep_cnt to avoid race conditions
while updating the cnt value at the time of SSR. Add check
while decrementing the cnt.
Change-Id: Ic8e40fa6b4a68c05fb70369ecb764943d5f582fa
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
To implement dummy device based a2dpSuspend/resume, adds support
for dummy device backend in audio kernel.
Change-Id: Iad4a210167ce400232c6d3b84bfca8b84fa358c8
Signed-off-by: Anand Mohan <quic_anamoh@quicinc.com>
Added new wsa2_init api to initialize slaves connected over
wsa2 macro. which will allow us to control them only when
wsa2 backend's are used.
Till now we are enabling all wsa slaves during wsa_init.
which causes concurrency issue, when we use them dedicatedly
for specific usecases, if one slave is disabled,the other
slaves are also getting disabled.
Change-Id: I1ec8c4700a977ad6001c879ad0343a45a1642105
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Program WSA_DATA_FS_CTL reg based on input used(wsa rx/wsa2 rx)
and also update the channelmap based on mixer cntl.
Change-Id: I0cfac1d9b25dd1211824bcea2753bb6c1131f767
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Mix path clk is gated by main path clk, as per current logic we are not
enabling main path clk for mix path use-cases.
Enable main path clk before enabling mix path for UPD dedicated backend
to work.
Change-Id: I209d1eaf25f4ef08bbd534f5ecc858e465ce7e18
Signed-off-by: Faiz Nabi Kuchay <quic_fkuchay@quicinc.com>
