Kernel panic is observed during SSR. This is because
ADSP does not get sufficient time to bring up LPASS after SSR.
An increase in ADSP Ready timeout resolves the issue.
CRs-Fixed: 2101404
Change-Id: Ia7d1ecde7a713b4d71b2a4ebb1f85a38b8fa28b5
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add a new mixer ctl to set WSA boost value for
speaker protection v3. Boost value for different
stages are packed together.
Change-Id: Ie80d7bea4d3af00b74935f8b680e72ee967717f6
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Add new mixer ctls to control max boost state level
for speaker protection V3.
Change-Id: If967de46955f6dc8692986503daea68ce105f642
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Switch to DLKM for all audio kernel modules.
Change-Id: I6a96023a21f655f873531af9ace81f2b01eb0f58
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Compander disable sequence does not get called
after headphone playback on FM. This results
in mute at one channel. Compander clock
should be disabled at the end to resolve the mute.
CRs-Fixed: 2102126
Change-Id: Ia47fb1c393db255b52a965173a769896768f245e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Remove any child devices associated with this
codec driver so that rmmod and insmod again will
run without issues.
Clear MBHC setting during tasha_remove.
Change-Id: Icad9b2ad21601525c68c5d151cd664aa6060e911
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Add support for HDMI and DP for S24_3LE bit format.
This allows playback of 24bit audio on the external
device.
Change-Id: Ia6e1148b2e5d13cc0ff6f2372d61c83c3e704255
Signed-off-by: Ben Romberger <bromberg@codeaurora.org>
Pop noise occurs during switch from handset to speaker mode
during voice call. This is because sufficient delay
is not provided for tx to unmute. A delayed workqueue
that will do unmute at the end solves the issue.
CRs-Fixed: 2101423
Change-Id: I1ae7068b23158bb8428d5b96e9f65fb05a67ff7e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Separate compilation of analog and digital codec and add
support to compile them as dynamic module.
Change-Id: I81f01bf60aef71f67e025fa4ff1ba805a960e61d
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
when moisture is in jack, removing of the plug result in
electrical removal interrupt. So, update electrical interrupt
handler to handle mechanical removal based on moisture status.
CRs-Fixed: 2058106
Change-Id: I9cfbfbaf04783f0edcadb14d7828759020745289
Signed-off-by: Meng Wang <mwang@codeaurora.org>
wsa881x speaker damage has been reported due to DC at
wsa output. Add a register setting which will reset
the soundwire when there are any DC or synchronization issues.
CRs-Fixed: 2086505
Change-Id: Id2bfb876a5bace891befa613153a88ee54033d76
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
To config different headset detection parameters for different hardware, add
two new headset detection parameters in device tree and read it in mbhc driver.
Change-Id: I10457b7d5eae54eba8a4cd273885a63ebad3ccb3
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Variable 'status' is used without initialization.
Initialize it to the right value.
Change-Id: I7f43d8905d8192e5f308e9fd00a52eb531f2f698
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Remove MCLK_CONTROL and FS_CNT_CONTROL from
the list of volatile registers so that regmap
sync happens for these registers when coming
out of power collapse. These clock registers
need to be synced otherwise codec state is not
restored correctly after power collapse.
CRs-fixed: 2053506
Change-Id: I9b5385a357f9ad05ad085603410704e916e3985e
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Propagate the changes based on latest snapshot
for audio kernel source tree at below cutoff of
kernel msm-4.9 -
(040750bfa78 -
"Revert "ARM: dts: msm: Add DT node for aop-qmp
clock controller on SDM845 v2"")
CRs-Fixed: 2104096
Change-Id: I0927c40b3a188dbf892e7ec4c1c7810953724929
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
The previous commit fb24ad8485a assigns obj-y with
msm_hdmi_codec_rx.o instead of appending, thus giving
compilation error as previously assigned object files
are removed.
Fix by appending obj-y with msm_hdmi_codec_rx.o instead
of assigning.
Change-Id: I7c5ea5627e2e1888e3fc0b53a6650ab64b9a29a8
Signed-off-by: Shiv Maliyappanahalli <smaliyap@codeaurora.org>
HDMI codec driver is not compiling as the corresponding object
file is not set in the makefile.
Add object file to SND_SOC_MSM_HDMI_CODEC_RX config.
Change-Id: I6068f551db357e5bfa73ff5b51014347f38b925c
Signed-off-by: Shiv Maliyappanahalli <smaliyap@codeaurora.org>
Propagate the changes based on latest snapshot
for audio kernel source tree at below cutoff of
kernel msm-4.9 -
(aed56b2df75 - "drm/msm/sde: update te vsync enable sequence change")
Change-Id: I7ed5102146986b81e5cb9ca55432360b3549b60c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Enable compilation for sdm670 audio. Update
for both internal and external codecs.
Change-Id: I030837a2c0180a5a31d0ab786ad5de607027050f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
(1996ec83a45: "ARM: dts: msm: Reduce CNOC bus voting for
USB slave on SDM845")
This change is to migrate latest snapshot of kernel drivers.
Change-Id: I84669db544773d3ce9d2d5dff0ab6943bd7d8ff9
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>
