Add codec entry for AQT1000 codec to support ADIE calibration.
Add new hwdep node AQT1000_CODEC_HWDEP_NODE to store ANC/MBHC
calibration data.
Change-Id: I8b5ff9a2cfe2a0a8ac593b63b20b28697dc975bf
Signed-off-by: Meng Wang <mwang@codeaurora.org>
AQT1000 codec is a hifi headset that supports audio
playback and recording on headset. It also supports
playback of fractional sampling rates. Audio playback
and recording is transferred through I2S interface.
Add driver for AQT1000 codec
Change-Id: Iba163e9203d67216cdbf87727b06801356a001e3
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add changes to support wcd9360 audio codec driver in
wcd9xxx common files.
Change-Id: I5b9f9d592b6843d7887eb3954d079776ddf15764
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
Re-factor audio clock driver to register one clock at a time
and remove duplicate lpass clocks.
Change-Id: I63ddf4b65ec7e9cda0dcad4e0167cd8636e89e1a
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
In analog codec, EAR PA gain control get
function is updated with input value again
resulting in override. Remove the override
of control value again.
CRs-Fixed: 2161617
Change-Id: I7ddd252adf53666a6c9adc1bc92e840067fa932c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
With AANC enabled, and when the device switches
from speaker path to handset path there is a audible
pop. Add more delay to the aanc enable work function
to resolve the pop issue.
CRs-Fixed: 2137607
Change-Id: Icaf381179b0a81440b21ab4280cb6fc95e6fe6ba
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add interface to trigger WDSP dumps for debug use.
Important register dump and WDSP ramdump are both collected when
DEBUG_DUMP string is sent from userspace via WDSP misc node or
when WDSP boot timeout happens.
CRs-Fixed: 2117755
Change-Id: I8b91a8939201a54512a5e3557ce771b4ff2ff075
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
Release the acquired mutex when there is failure
in enabling the soundwire clock.
Change-Id: I2e10ed7f0bd86524998a67d62e85754f7989eca2
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
High impedance aux cable when inserted causes jack to change to
lineout. This causes removal event to be called which results
in pause during music playback because jack value is not updated.
Do not change current plug while plug is marked as lineout.
CRs-Fixed: 2151012
Change-Id: I99797b58c48be00185a352094e32e8623faee491
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
To reduce time of usb-c analog headset detection, reduce
gnd mic swap threshold if usb-c is enabled. Use
existing threshold value otherwise.
CRs-Fixed: 2137077
Change-Id: Ic1d1f3a00c9034caaac45f2c80f018546a69ce59
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
In SSR init call stop mbhc before initializing mbhc
again, so that usbc analog deregisters the callback
with PMI notifier.
CRs-fixed: 2128532
Change-Id: I329f25172b5cc2d80b93918787f703d89c95062f
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Based on where the code is synced the driver should allow
both static and dynamic linked compilation.
Also remove __exit for modules loaded from another common
init/exit functions.
Change-Id: Ib58f152002aba3af4446f9bbd9b82c279212bd0a
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>
Disable regulator supplies of analog codec during suspend
to reduce power consumption.
CRs-Fixed: 2132296
Change-Id: Ia4b690f01e83e929f8bf4d279454e2ff2e8655a2
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Add support for analog mic TX hybrid mode to allow
audio catpure in high performance at the same time
achieving lower power.
CRs-Fixed: 2136385
Change-Id: I08b90a26d6b6e4761ff17dec84bf58f8d437d908
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Pop sound happens after start playback on HPH when
ultrasound playback on LO4 is enabled.
This is because CnP is sequence dependent and enabling
design blocks in specified order is causing minimum CnP.
CRs-Fixed: 2100346
Change-Id: If10f9013cc1a2aa61fe9c719d3190f2df0b00950
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Set bus_down_in_recovery flag as soon as possible when
BUS down notification reaches codec driver. This is to
avoid any unwanted slimbus transaction while BUS is still
not recovered.
Change-Id: I77917975372bf51e6aa881cbfc63c479478db375
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Reset ASRC after audio playback is completed to clear
the FIFO and avoid any noise being generated.
CRs-Fixed: 2129994
Change-Id: Ie45796e1bd68d5a8bd790490a65520358f26b811
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
This reverts commit 40bc50d768038c04f8c1 ("mfd: wcd9xxx-core:
Synchronize codec down and reset calls from slimbus.").
This is to make sure that the dev_up flag is set right
after device_down is called from Slimbus after ADSP SSR.
This flag helps make sure that all read/write calls over
slimbus are blocked until ADSP and Slimbus are fully up
post-SSR.
Change-Id: I5595a23a0b51f2ca392ddfb5773b057204185b54
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Pop is observed during switch from playback in native mode
to voice call and vice-versa. This is resolved by mclk
reset to non-native mode before hph path powers up.
CRs-Fixed: 2117960
Change-Id: Ic554c3b2af24dac3ae94b5a239559e5d11e98271
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update make files to extend dlkm support for qcs605
Change-Id: Icf736fb66ca12966f4c6cd72bb906eb32899868a
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
lb_mode var is redundant for sdm660_cdc.
Loopback works fine without this var also.
CRs-Fixed: 2101423
Change-Id: I727da02660a0f1d6ee5582fc2f2c0a8f6cd59bc1
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Pop is observed after start playback on hph.
This is because both compander channels are not enabled
at the same time which differs from ideal sequence.
Amplitude of pop gets reduced after
corresponding change is made.
CRs-Fixed: 2101404
Change-Id: Iba2b8a809fd3b53f0c180ce28ac5668d7635fb24
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
If compander DRE isn't turned on, ensure analog gain mode
is set to manual mode. This also resolves low volume
at one channel.
CRs-Fixed: 2102126
Change-Id: Id29b7055fe4f7fa7b3853c26770df38d10539d8c
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
