In open mode, driver sends PCL list to firmware as part of STA
connection completes. To send the PCL list, driver checks whether
active session increases or not. But in current scenario, first
STA connection complete happens and then active session increases
which results no PCL list to firmware.
As part of fix, first increase the active session and then do STA
connection completes so that PCL list will be send to firmware
after successful STA connection in open mode.
Change-Id: Ie920aad7d1d693f04e5b4c13806ec09078ffd8c9
CRs-Fixed: 3042257
Fix few missing attribute in below connectivity events:
QCA_WLAN_VENDOR_DIAG_EVENT_TYPE_EAP_RESPONSE
QCA_WLAN_VENDOR_DIAG_EVENT_TYPE_ROAM_SCORE_CURR_AP
Also send the roam candidate info properly to userspace.
Change-Id: Ia9c4f095316adf8f40294f1e119cad648749bb72
CRs-Fixed: 3037650
As per new API changes, util_scan_get_ml_partner_info is modified to
pass the output pointer to ml partner info structure. Update caller
accordingly
Change-Id: I4da4a52a857eb147fe74f783136da71252e04444
CRs-Fixed: 3043820
During wma_pdev_hw_mode_transition_evt_handler()
get the freq range from mac_freq_mapping[] present in
wmi_pdev_hw_mode_transition_event_fixed_param and pass
till policy_mgr_hw_mode_transition_cb() and update
cur_mac_freq_range[MAX_MAC] from it. if no freq range
provided (legacy chipsets) then use
freq_range_caps[MODE_HW_MAX][MAX_MAC] to fill the
range depending on the new HW mode.
Change-Id: I145d48052ce37724b0f697c19a1041f5a908cb54
CRs-Fixed: 3044976
In STA+STA roaming case, when primary interface is changed
and roaming is enabled on other interface rso stop will be sent.
But the roam scan mode is not set to 0.
So add check for primary interface change to reset roam scan mode
before sending RSO stop to FW.
Change-Id: Ia880b58a57b3d9b74f3c4e100d4724aac46b67cd
CRs-Fixed: 3042416
STA connection with OWE transition mode SSID fails due to join
failure timeout. Since, it is OWE transition mode, STA needs probe
response for join success.
The scan table entry of the candidate BSSID is sent in the join request.
This entry is used to create session and to send probe request to AP.
In case of OWE transition mode, the beacon carries wildcard SSID.
Therefore, the scan table entry also has wildcard ssid. Also,
during the candidate selection, scm_ignore_ssid_check_for_owe check
allows even entries with wildcard SSIDs to be selected as candiates
for OWE transition mode.
The join request with Wildcard SSID in the scan entry is used by LIM
to create session, as well as to send probe request.Therefore,
the AP doesn't respond to the probe request with wildcard ssid
leading to join failure timeout.
This change adds ssid from connect request to the cm_vdev_join_req,
which can be used by LIM to create session and to send probe request
whenever the SSID in scan entry is wildcard.
Change-Id: I02e19e16f2620b5568fbff82ff29d394ab9ee00d
CRs-Fixed: 3041073
Add support to parse roam frame info TLV.
Add changes to send the BTM request logging event.
Change-Id: I24fab5fc0ec204fce74cf822742b5a44b0e7774f
CRs-Fixed: 3013489
When band is changed from dual-band to single band
(2G only):
1. host need to remove IDLE & BTC trigger bits from
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
2. Send WMI_ROAM_IDLE_CONFIG_CMDID with enable=0
When band is changed from single band (2G only) to
dual-band:
1. host need to add IDLE & BTC trigger bits from
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
2. Send WMI_ROAM_IDLE_CONFIG_CMDID with enable=1
and with default configurations.
To configure the above value in FW, send an RSO
update to FW whenever host receives set band command
from the upper layer.
Change-Id: I5a78deee713ff8514640d1867098e4045b77a231
CRs-Fixed: 3033081
Currently, reject_ap_info is used at many places and memset is
not done before filling it. memset the buffer to avoid reading
garbage values.
Also, modify the current initialization of ap_info in
cm_add_bssid_to_reject_list to memset.
Change-Id: Ic0fabc1733c4ea63dccb2e45b2a2dc37791e594d
CRs-Fixed: 3040299
Currently, the ROAM event is posted to scheduler thread when it's
received from firmware. This is done to avoid processing the
complete event in IRQ context as the same callback gets called
from IRQ context for WOW events(WOW_REASON_LOW_RSSI and
WOW_REASON_HO_FAIL). Posting the ROAM event to scheduler
thread may introduce some additional delay in processing it back
as there would be a context switch.
If this ROAM event carries ROAM_START which is followed by a
ROAM_SYNC event, there is chance to process the ROAM_SYNC
before ROAM_START as ROAM_SYNC would be processed in the same
context whereas ROAM_START needs a context switch. This results
into an invalid connection manager state after processing
ROAM_START event, which results a connection failure.
Same is applicable for ROAM_PMKID_REQ_EVENT and
ROAM_VDEV_DISCONNECT_EVENT. Avoid reposting the same to scheduler
thread.
Change-Id: Ic4fc1b3baf12e4ceee9a0975ebfee77fb88ab6f0
CRs-Fixed: 3033657
Add new files for connect/roam logging. Add changes to
initialize the logging buffer.
Make changes to support enqueue/dequeue log.
Define enums for MAIN_TAG, Sub TAG, category.
Add structure definitions for logging buffer.
Change-Id: I1d283fcf464da90d4f5533214d480ddda156ec27
CRs-Fixed: 3013486
Fix possible memory leak while updating dual sta connect channel list
in wlan_cm_dual_sta_roam_update_connect_channels.
Change-Id: I39dc05e485a0f00189978a38fa927a6ec4bd0086
CRs-Fixed: 3035192
Print channel list which is allowed for connection for the
second STA when dual sta roaming in is enabled in
wlan_cm_dual_sta_roam_update_connect_channels to enhance
debug log.
Change-Id: I4e16f101b60dc9d34d6193adcfe72ec173c5467a
CRs-Fixed: 3000235
Currently, firmware can roam between owe security SSID's
even though open SSID is different for both of the AP's.
This commit adds support to restrict roaming between the
same OWE profile AP's which means if the device needs to
roam then target AP's open SSID and owe SSID should match
with current AP.
Change-Id: Ib59127a90cab9ee6626b018d581edbf76ad89856
CRs-Fixed: 3025667
Send additional roam trigger TLV for BTC in
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID
command, to support a new roaming trigger
"WMI_ROAM_TRIGGER_REASON_BTC".
Change-Id: Ib767bd6bcf005c187b0fb58986ad287fe8753c1b
CRs-Fixed: 3009788
To support BTC roaming, add a definition of BTC roam trigger
reason in ini roam_triggers. It goes to fw via roam_enable
trigger command (WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID)
Change-Id: I231a72ed98a74fb1b5ced12da7c3932af12d485d
CRs-Fixed: 3009787
When the connect request is pending on MLME and NB disconnect comes,
driver will wait for previous connect finish to process the disconnect
request. This delay the disconnect and may cause framework ANR.
Add code to fire the timeout event of active timers in various MLME
state. This will abort the connect request and get disconnect done fast.
Change-Id: I19cc03108c966c8f1efc0a554dfc59123dfe37f1
CRs-Fixed: 3026311
The PER default low rate thresholds configured is 20Mbps. This
will cause PER roam scan always after the 25 secs PER monitor
window since the 11b rates are lower than 20Mbps.
So disable PER roam when the connection/roaming to peer is with
cckm/OFDM rates to avoid frequent roam scans.
Change-Id: Iaae469804547c0f0682b66de3609b5cda4b4b577
CRs-Fixed: 2984973
OEM-SS sends ROAMBAND attribute via the vendor command
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET to host to
get current roam band value in the host.
Fix is to process ROAMBAND attribute and send roam band
value to upper layer.
Change-Id: I56b208d00b40d4d3e6d3658d23fa1073f6fe1146
CRs-Fixed: 3009753
Filter roam scan channel list or frequency list as per the
band received from upper layer via attribute
QCA_WLAN_VENDOR_ATTR_SETBAND_MASK and
QCA_WLAN_VENDOR_ATTR_ROAMBAND_MASK.
Change-Id: I4820bfc487949d8445f215a4779dd671925d001f
CRs-Fixed: 3009758
Whenever host Receives vendor command for SETROAMBAND, Host should
set PCL list as per roam band to fw so that FW can use updated pcl
list for further roaming.
Change-Id: I2f48833801b75f25aaf37ea479867b19477ceecb
CRs-Fixed: 3009751
Process the BAND_MASK attribute which comes to the
host via the QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET
vendor command. Save the value of this band mask into
the RSO configuration structure.
Change-Id: I57ecc10912a38207ef478b38cf3add3c584dd2f4
CRs-Fixed: 3009749
When getting rnr IE information, instead of getting rnr pointer through
input parameter, we can just return rnr pointer.
Change-Id: I7215451d34164d40d6404d0a426f1cc30a143e15
CRs-Fixed: 3025191
This change removes the "delete pmksa on BMISS" logic in commit
I5d8ec9e9d4f8a44178b113d370799fe2bc0373fb.
Will handle the issue in new commit by OUI checking of AP.
Change-Id: I871999f8c473afdc75b774210044fc059fcd07b0
CRs-Fixed: 3021068
Currently, wmi_roam_pmkid_request_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I3fad4e4d7ceeb85c632723e161809bf980d5375f
CRs-Fixed: 3014248
Currently, wmi_roam_auth_offload_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I128db23077d423c5e5ecf27636bc3af35cbbc58f
CRs-Fixed: 3010419
In roam invoke request, if bssid is same as connected
bssid use connected frequency.
Change-Id: I0e205ffab002b80021bf6a615e4cfc0a723f0ba5
CRs-Fixed: 3022351
Populate assoc assoc link id in ML IE of an assoc request from
scan cache entry
Change-Id: I82b2b68f45411b1588c76ddd7ce9d21a93d972f3
CRs-Fixed: 3013684
-Extract new wmi struct added as part of MLO roaming
changes.
- Send EHT and MLO weightage percentage to FW via
WMI_ROAM_AP_PROFILE.
Change-Id: I6b3f1f62ef6ea323cd1b75f63a5c63c38b000f1f
CRs-Fixed: 3010039
Currently, wmi_roam_stats_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I5e336b01e1a2183e49b3e6eeb125c7c9fd0fd73c
CRs-Fixed: 3003125
When driver gets rrm request it tries to get country from beacon IE
and if country is not present in beacon IE it sets the current
country information from regulatory and does not sets the op class
which is not the right way.
If AP does not send country in beacon IE, driver should set
GLOBAL_OP_CLASS for rrm request.
Change-Id: I4797d03f38817ac580f3bfea08f1939dad4da5d1
CRs-Fixed: 2996921
For roam scanning, "specific channels list" is preferred over
"preferred channel list". Hence if user configured specific channels
then return invalid for ADDROAMSCANCHANNLES command.
Change-Id: I858eef5c990cedb4b12c21c1a00f34ff6b819849
CRs-Fixed: 3014609
Add 320MHz support in cm so that connection info can reflect
correct 11BE 320MHz bandwidth.
Change-Id: I44772472bf9e64af0e47ad71ca7d29d1ff90daed
CRs-Fixed: 3009311
The RRM request may have different country code with DUT internal
regdb configure, use country code from beacon IE if it is present,
otherwise use internal country code to verify op class of neighbor
report channel list.
CRs-Fixed: 2997474
Change-Id: I35a62d9791f08d26dd8a892739612eb422805523
When firmware sends Roam synch indication, driver changes the
roam offload state to ROAM_INIT and after set key completion is
received, RSO start will be sent. But if EAP/EAPOL fails and
disconnection is triggered then deinit command is sent without
setting roam scan mode to 0 with RSO stop command.
So change roam offload state to RSO_STOPPED if auth status is
connected in roam synch indication.
Change-Id: If8f56ce48500f6848fa917854b6252f8deb67c01
CRs-Fixed: 3005697
Populate mlo IE for assoc req with inheritance mode.
populate base rate, extend rate, capability, extend capability
and HT/VHT/HE/EHT capability based on mac context.
Change-Id: I5e1c350a9c5f23a63d11c6d4b5cdbf0422dd53e0
CRs-Fixed: 3000895
In case of STA + STA concurrency, enable roaming on
another interface only if STA + STA concurrency is in
DBS.
Add sanity for SCC concurrency also along with MCC
concurrency in cm_roam_switch_to_init.
Change-Id: I8787828b4b950c355e9bf70af58aad7779de3e9f
CRs-Fixed: 3001723
MLO sta needs mld mac and assoc link information to create bss peer
Get mld address and assoc link info from connection manager and pass
it to bss peer creation
Change-Id: Ie04d4eb01f1a039f068b32b6c53aa3e65c919518
CRs-Fixed: 2987483
Host driver enables hi-rssi roam trigger when STA roams to 6Ghz
AP. But hi-rssi trigger should be enabled only for 2.4Ghz AP
else it will cause frequent roams even though connected to
good candidate AP.
Disable hi-rssi roam when roamed to 6Ghz band AP.
Change-Id: I2ea2d06634963c1190aa1ca0d466b0873e36fbfe
CRs-Fixed: 3001090
Currently, wmi_roam_scan_chan_list_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I8f59f9ebfe1bbdc7ef37ccc1f10178fe8128e912
CRs-Fixed: 2990376
Currently, wmi_vdev_disconnect_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I2486cc3f63c4b35305b60ac55cd0a622c7185323
CRs-Fixed: 2990373
Currently, wmi_roam_blacklist_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I41d2ef6c228acd8f86f24107c02d11f1a8ac6dea
CRs-Fixed: 2990369
Currently, wmi_roam_event_id data is extracted and processing is
also done in wma. This is not inline with component model where
target_if takes care of data extraction and handover the extracted
data to corresponding component(connection mgr in this case).
Add changes to support the same. As the legacy CSR/LIM is not
yet converged, have a wrapper from connection mgr to wma to call
these legacy APIs.
Change-Id: I0e22bbccfe21200b90771a01f9ee7454f4ecb119
CRs-Fixed: 2990355
In ROAM DONE event handling, policy mgr restart sap is not invoked after
updating the connection info and hw mode info thus not restarting the sap
after roam sync
To solve this, adding policy manager check after updating the policy
manager connection table.
Change-Id: Ifb8a5eecb98c05166986052ccc32422dbbe3bef7
CRs-Fixed: 2991721
In cm_roam_switch_to_init(), vdev returned from the api
wlan_objmgr_get_vdev_by_id_from_psoc_debug() could be NULL.
Vdev is dereferenced without NULL check.
Validate vdev against NULL before dereference.
Change-Id: I42ff6943e568f16b78290a3310a8999d26c15af9
CRs-Fixed: 2996914
