Use the wmi enum type in function send_get_rcpi_cmd_tlv converting from
rcpi_measurement_type.
Change-Id: I5b506059ad8b0f4cd65c24e20df6306a47249fdb
CRs-Fixed: 2216017
WMI_VDEV_PARAM_AUTORATE_MISC_CFG is introduced to set
HE GI LTF combinations in case of autorate adaptation.
Add support for the same in host side wmi files.
Change-Id: Idf567d771539b17e669ddab8b85092e3cbf9d3c8
CRs-fixed: 2204393
There are instances of use of older A_UINT/A_INT.
Replace all such instances with the qdf u_int*_t/int*_t.
Change-Id: I7ce29b03f29a0d1a0cf87cfd3c846f4694da4c2a
CR's-Fixed: 2210869
IPA module has been moved to CLD component under the converged
driver model. Point the wmi API's and structures to the newly
defined files.
Change-Id: I96205f7cc18dbea1c05a5f6314490ea6b3dd75fd
CRs-Fixed: 2180176
Enable mesh vap beaconing ioctl is sent via
vdev setting WMI cmd for WMI_VDEV_PARAM_CAPABILITIES.
But the vdev_param array for tlv is not populated.
Change-Id: Icefd3a506baf3459b95cdc31bd447f80068954df
CRs-Fixed: 2141343
Modify arguments of wmi_unified_attach to use struct to
send attach params instead of individual params. Add max
WMI commands as a param. Based on requirement MAX WMI
commands value is different. In case of AP that supports
16 VAPs and more than 512 clients, 1024 commands is not
enough. Use this param to configure this value based on
the requirement.
Change-Id: I4e778475481e509051dfbac70980614b644e1b4a
CRs-fixed: 2034438
Firmware recently exposed two new resource config fields,
num_packet_filters, and num_max_sta_vdevs. Add these fields to the
host-side resource config struct so appropriate values can be populated
and communicated to firmware.
Change-Id: I951ba6ac929c38c2d78af6705f4922b62fc7d3a1
CRs-Fixed: 2201876
Extend wmi interface command to support other
connectivity check stats(ICMPv4 and tcp).
Change-Id: I881aaeab6e3e1f36b7153630b87a07019660d896
CRs-Fixed: 2168412
Add function for extract_nfcal_power_ev_param and
register wmi_pdev_nfcal_power_all_channels_event_id event
to support noise floor in HK.
Change-Id: I6eef823b507be94c65df026664244eec7fc07e24
CRs-Fixed: 2157972
get_pdev_wmi_handle() can return a NULL pointer in some cases.
Perform a NULL check before using the returned pointer.
target_psoc_get_service_ext_param() can return NULL pointer in
some cases. Perform a NULL check before using the pointer.
The power debug command can take a maximum of WMI_MAX_POWER_DBG_ARGS
arguments. Check for the limit before indexing the array to avoid
illegal access of memory or overflow the array.
Change-Id: I264475e9f86c7a7e78b17b7a1fa025718a7c5af6
CRs-Fixed: 2196063
The debug print in function send_beacon_tmpl_send_cmd_tlv
is too verbose and doesn't exhibit anything meaningful.
Remove it to make sure meaningful logs will not get
overwritten during SnS tests.
Change-Id: I4564ac83715f0003ad53aa73f0fb859cc5cbec1c
CRs-Fixed: 2197209
qcacld-2.0 to qcacmn propagation
Adds qdf time api to get time of the day in millisec
Also send host timestamp to firmware, so that firmware can print the
logs timestamp in sync with host via the wmi interface,with
api wmi_send_time_stamp_sync_cmd_tlv()
Change-Id: Id6acfc5227fdca2fbf8d266998fdfc4046adc5f4
CRs-Fixed: 2193978
Add sanity check for wmi TLV header length before padding/shrinking
elements in a wmi which has a variable length for its TLV structure.
Currently, the TLV length is not checked so its maximum value could
be 65535 which results in a hugh count for elements. Number of elements
is used to terminate the loop for padding/shrinking. If the number
was too large, there would be memory overflow.
Change-Id: Iea0615fc511696c6cc5dcc48a9dfff225256a52b
CRs-Fixed: 2181685
Add command support to not send ADDBA REQs.
The corresponding WMI VDEV param ID to set the
VDEV param has been added.
Change-Id: Id53f8101a61ccc0aba2a9a6735d1c6942ba3592d
CRs-fixed: 2188560
Under low memory conditions skb allocation sleeps
and results in kernel work queue watchdog.
Increase the wmi timeout to check if the system
recovers to allocate the SKB.
Change-Id: Ie4e42fdc71703c687ba2e5a4d995481ea7931c97
CRs-Fixed: 2158198
Add support to send the per chain rssi to upper layer
for each beacon and probe responses.
Change-Id: Ife6cb9e8e65591baf485c54a985f84d842400321
CRs-Fixed: 2177638
Firmware will use this configuration to enable/disable the
CCK transmission. By default, the CCK Tx is enabled.
CRs-Fixed: 2191524
Change-Id: I165c3ea10ea3734fc81e7d25fe8ad676afd1b2c1
Added extender service support for obss and obss color
Collision offload support.
Change-Id: Ifd249b3bbf4510297f15beb33df13d6c4f9d7d0e
CRs-Fixed: 2185238
Current Spectral module uses qdf_print. To improve the control over
logging, use module level logging
CRs-Fixed: 2165341
Change-Id: I205991347453c4dcc424ba1958e309b7c5fb71a0
As part of converged architecture wmi_service_enable is converged
and should be used instead of WMI_IS_SERVICE_AVAILABLE. The events
also need to be defined as part of array for mapping to converged
event id's.
Change-Id: I9ab342a5cf6e665a3eb90eeef6d10bf3c145049d
CRs-Fixed: 2186338
Change WMI initialization sequence to support WMI modularization.
TLV and Non-TLV modules calls WMI module registration based on target type.
WMI attach will call respective attach routines based on registration.
Change-Id: Id56446f491d129758537913d2d5d6633f8dec918
CRs-Fixed: 2179854
Remove dependency on WMA layer for green AP component by registering
green AP events through target_if layer.
Change-Id: I8fe9079c6ba6b23cd5f1d98a7d1b333fde31f19b
CRs-Fixed: 2178143
command:-
1. "iwpriv athx s_txpow param1 param2"
2. "iwpriv athx g_txpow param1"
param1 = frame_type<<8+frame_subtype param2 is power_value
if subtype == 0xff means set all subtype of that frame type
Change-Id: I8c68e1ca6a5829a3f0cf01b2c32c3332e1010243
CRs-Fixed: 2175241
Increase the maximum value of unit test arguments to 100 to include
support DL OFDMA RU allocations for testing / debug.
Change-Id: I33ed8d53931e33cc00069653ea38b543339203c0
CRs-Fixed: 2175616
In extract_ndp_confirm_tlv & extract_ndp_ind_tlv, ndp_cfg len &
num_ndp_app_info is from fw. If they are greater than the actual
length of buffer sent in FW, OOB access and info leak would occur.
Add sanity checks for ndp_cfg_len and num_npd_app_info with the
actual length of the buffer from TLV header in functions
extract_ndp_confirm_tlv & extract_ndp_ind_tlv to prevent OOB access.
Change-Id: I9ecf55a3606036d3e1f0916c948c4360475965fa
CRs-Fixed: 2176968
WMI service handle is not attached for all Pdev with recent
WMI changes. Fix host panic due to missing WMI service handles
for all Pdev.
Change-Id: Ic6107120ea4a49e49b86ebbfe385e440de3f49a9
Add a faked WMI layer for OCB unit test on platform does not
support OCB feature.
CRs-Fixed: 2177563
Change-Id: I35b272faa21f3b225eb036c06a15b06ab4b389ae
The pulse_delta_peak of chirp radar is not zero, which is one more radar
detection rule for ETSI chirp. Driver need delta peak related information
from FW for ETSI chirp radar detection.
Two more fields pulse_delta_peak and pulse_delta_diff are added in
wmi_dfs_radar_event_fixed_param.
Change-Id: Ief8dbea1c1336f45a24195853d5e1356bf3cad27
CRs-Fixed: 2179933
Currently WMI handler for WMI_PHYERR_EVENTID is used to handle DFS and
spectral scan phy errors; but Rome FW still uses WMI_PHYERR_EVENTID
and WMI_DFS_RADAR_EVENTID and does not have spectral scan phy errors.
Restore WMI_PHYERR_EVENTID and WMI_DFS_RADAR_EVENTID as Rome FW
requirement.
Change-Id: I23ca4ff6c9be0ba6a0f21f0e0ef9161b1942f629
CRs-Fixed: 2160431
Add WMI support for enabling/disabling the FW scheduler APIs and stats
per peer for MU and OFDMA
Change-Id: I185ca6ff5b564fc9b83007fd4e37da82b5c9976e
CRs-Fixed: 2169179
removing Length check temporarily
as existing length check is not applicable for HK.
In HK, CTL bin file size for 5G is 26556 bytes and
for 2G is 5852 bytes. 1.7K is the maximum payload size supported by TLV.
To support, we add header info: seq, endflag, total_len
before each chunks. Total bin files are transferred
as multiple chunks with header info on the top.
Change-Id: I7aedf85d6ee66a99cb4b6dca464dbe02caec371b
Add WMI support to set SU and MU TX beamforming sounding interval on
host driver in addition to enabling/disabling the above ability.
Change-Id: Ic3ea109e47c0df13db2c919bbcdf5fc7d6164698
CRs-Fixed: 2169176
Add min, max, reg max, antenna gain and max tx power to channel
field of WMI command for scan, vdev start. Max tx power is set
to reg max power. It is set to TPC on IE for MCL STA case.
Change-Id: I416b94f68a9c5db925a9ef8c731350ba27caa7a1
With gcc 5+ utilized for driver building, more coding errors are
detected, some of which are valid issues.
Fix all those errors in one shot.
Change-Id: I263c70d4bff9ec0c3076103001cd7f2ccc8e0d1a
CRs-Fixed: 2176076
