Replace slave for target, and replace
master for initiator which pair of slave.
Change-Id: I4f758a2149f9314d92cc775d2d665ada0d8c8a43
CRs-Fixed: 3169100
It is MLO single link connection if MLO sta does not include
partner link information in mlo IE in MLO assoc request.
Make MLO single link connection work.
Change-Id: Ib0de4a79be794c53327241fe7be5af88f9a055e6
CRs-Fixed: 3168615
Currently for big data stats, driver gives rssi from get
station command. As get station command comes every 3 seconds
from user space, this rssi can be 3 seconds old rssi value.
When station gets lost link info as part of bmiss indication
or as part of disconnect from AP,it receives rssi info as well.
Since this is the latest rssi info before disconnection, driver
needs to give this latest rssi instead of the rssi from get
station command.
To address above issue, update rssi in big data stats cache
information from lost link information.
Change-Id: Ifc81541c3ef67bbeb86b4775bbc8f295971777c8
CRs-Fixed: 3166948
Add 3 home channel check for 4th active vdev. Do not allow
if in DBS and SBS modes 4th freq can lead to 3 home channel.
And optimize 3rd active vdev APIs.
Change-Id: I2d1ef437fc5c69b1255863c85a2b9f4efa24fa58
CRs-Fixed: 3172212
Currently driver does not have the interface info
in the stop ap and restart ap
Add netdev interface and event flag info
in __wlan_hdd_cfg80211_stop_ap and hdd_ssr_restart_sap
Change-Id: Ibb915f597923f864fbbda1bc92255df968bee815
CRs-Fixed: 3154052
To use skb_orphan instead of skb_unshare, this is
aimed to prevent addition skb_alloc possible failures
in TX path, then avoid of unnecessary packet drop when
memory runs low.
Change-Id: Ic8dfdb09c73a1071678612430fff2f23180ad336
CRs-Fixed: 3162137
During sta+sta dbs concurrency, if vdev1 sta disconnect, vdev0 sta pcl
isn't updated to firmware to include all band.
Change-Id: I986b85644cf17ad917136adc1ea274ae2d8ed795
CRs-Fixed: 3171216
Enable IPA only if it is enabled in both platform driver
and ini file.
Clear g_ipa_pld_enable if disabled from pld.
Change-Id: I1bd4e03eadf420f736bb91478b0f2e04bcd60ebd
CRs-Fixed: 3148820
Add a new field max_mcs_index in mlme_legacy_priv to save max mcs
index of current vdev.
Add a new field max_real_mcs_idx in hdd_station_info to save max
mcs index of the connected station.
Change-Id: I28908515cbe5c18c79f14f8645defd5c82e3a6f0
CRs-Fixed: 3065838
Currently hdd_cm_is_vdev_associated() and cdp_peer_state_get() per
packet check consumed much CPU on TX path, they will hold spin
lock which will introduce contention between different TX streams.
solution:
(1) check is_authenticated in sta_ctx->conn_info, if true,
then connection has been established already.
(2) clear is_authenticated flag if disconnection happened for
STA and P2P client.
Change-Id: I208608eba7bab69c8795e25495424327b7f2331f
CRs-Fixed: 3165165
When obtaining twt session traffic statistics,
some allocated memory not freed for failure case.
Fix it to avoid memory leak.
Change-Id: I18ce45467c3600c3f62b23ab50582ecb40ced88d
CRs-Fixed: 3169747
Currently driver code has data type as char* for NAN related code.
With this change update this data type as const char*.
Also, move NAN related functions under WLAN_FEATURE_NAN feature flag.
Change-ID: I61ad10304be4399a68f32778d01d9a951d7d14bb
CRs-Fixed: 3169168
Currently host driver creates/deletes NDI interfaces using
vendor command. With the kernel 5.12 version onwards,
interface creation/deletion is not allowed using vendor
commands as it leads to deadlock when driver tries to acquire
the RTNL_LOCK at the time of netdev register/unregister.
With this change, add support to Create and delete NDI interface
using NL80211_CMD_NEW_INTERFACE and NL80211_CMD_DEL_INTERFACE
commands respectively if driver advertises
QCA_WLAN_VENDOR_FEATURE_USE_ADD_DEL_VIRTUAL_INTF_FOR_NDI capability.
Since NL80211_CMD_NEW_INTERFACE and NL80211_CMD_DEL_INTERFACE
already comes with the rtnl lock and driver does not need to
take the rtnl lock again which will help to avoid the above issue.
Change-Id: I6d5441a5e883de1222f105f26d73cb0506d16ddf
CRs-Fixed: 3167125
Currently min_dwell_time_6g ini support is there only for normal
scan.
Added support to configure min_dwell_time_6g in roam offload scan.
Change-Id: I7da5fff738dbaf2a28a909e58ab6c797724ccfaf
CRs-Fixed: 3156597
320MHz bandwidth is supported only for single PHY mode. Therefore populate
320MHz support from HW_MODE_SINGLE mac_phy_caps_ext2 entry.
Change-Id: I298b13a82ca0532aa6da76d12edd12a57c74121a
CRs-Fixed: 3165631
Currently wmi_roam_event_id event handler only register under feature
WLAN_FEATURE_ROAM_OFFLOAD, but it's needed for LFR2 roaming too. So
refine roam event processing for LFR2/LFR3.
Change-Id: Ic07fd8a543142fc1e151f484979ab99ff55ce802
CRs-Fixed: 3161973
Update PCL type for STA+SAP+P2P 3vif concurrency using
PM_SBS_CH_24G, PM_SCC_ON_5_5G_SCC_ON_24G.
Change-Id: If82f928134e45486114fd6d4a6222e7127d6b9fd
CRs-Fixed: 3168636
When N79 enabled and disable 5G and 6G band, 5G SAP will swith to 2G
band with CSA. CSA reason should be CSA_REASON_BAND_RESTRICTED.
Change-Id: Icd6cf62ee1f58834a97663f784b50f925782a3ef
CRs-Fixed: 3165067
Call cfg80211_register_netdevice in ndi mode for Kernel 5.15+ in order
to properly register device.
Change-Id: I3441a2ae39f07ab2e80c47cdadfa489cc1d64e00
CRs-Fixed: 3155379
Currently, debug logs are printed in lim_populate_fd_tmpl_frame
and also there is hex dump for the same packet in
lim_send_fils_discovery_template.
As packet can be re-created from hexdump, so, there is no need to
print debug logs in lim_populate_fd_tmpl_frame.
CRs-Fixed: 3168966
Change-Id: Iad883db82f59eef4a0435c2c176a7410ead11e7a
When SAE authentication fails due to some reason and if the
failure is detected while processing confirm request from the
station, some APs send deauth instead of confirm response.
Current driver/wpa_suplicant wait for the confirm response and
driver drops the deauth frame as it's in the middle of SAE
authentication. This results in connect timeout.
Driver is supposed to process the deauth from AP and indicate
failure to userspace. To resolve this, consider the deauth from AP
as SAE failure and abort the connection. Send connect failure to
userspace.
CRs-Fixed: 3157178
Change-Id: I09c9d8b19539e4986665c6052d3a7f52b3e49600
