Remove OEM DATA REQ serialization enum, since wifi positioning
component does not use command serialization.
Change-Id: I16cb21a9ea6b4610dbde4ab51a6cec7542a7e0c0
CRs-Fixed: 2003488
Add an ini item for configuring the keepalive method used by station
interfaces.
Change-Id: Id44773f5ae7f7ad1ad9441592512ab3e2ce3a076
CRs-Fixed: 2016799
In case of auto channel selction failure, clean exit does not happens
which results as scan completion event timeout in start bss API.
Add appropriate API call with channel selection failure
case.
Change-Id: I66a81f586234adb5a0edc4c85cfbaa221424217f
CRs-Fixed: 2006960
Inform the bss using the new API cfg80211_inform_bss_frame_data() which
also has the ability to inform the timestamp when the frame has
been received.
If the support is not present in the kernel fallback to the legacy
inform bss.
Change-Id: Iaa512248a5e56d77cff39da562e0c9ee4eaeeefd
CRs-Fixed: 1082423
Check the FW capabilities to enable VHT160MHz support.
Disable 160MHz by default in the configuration.
Change-Id: Ia6985d9f7c55a070dbb47faf95cd409201037e0c
CRs-Fixed: 2004245
Currently, enable/disable channel avoidance event based on INI is done
in hdd_wlan_startup. In power save scenarios, where WMI configuration
needs to be sent again to FW, channel avoidance event setting is not
sent.
Move the channel avoidance setting to hdd_features_init so that this
config is set properly to FW in power save cases as well.
Change-Id: I707054c44a882f6dd4a4a9df2b6821b93b724f7a
CRs-Fixed: 2009299
The Preferred Network Offload (PNO) wakelock protects Supplicant while
it configures the new scan results. The wakelock timeout should be
optimized as much as possible on production builds, as it is never
released by the driver. For additional power savings, reduce the timeout
of this wakelock in production builds compared to debug builds.
Change-Id: Iaccf56e00e933d3a216212ef219f31d28d022ea5
CRs-Fixed: 2016286
Increment the pno_complete stats counter from the Network Listen
Offload (NLO) complete callback, in order to keep pno_match and
pno_complete stats synchronized.
Change-Id: I7ac7edeb3a10498549dceee1874c99ea3095f28e
CRs-Fixed: 2016236
wlan-cld3.driver.lnx.1.1-dev to wlan-cld3.driver.lnx.2.0-dev propagation
As a part of add virtual interface API kernel takes the rtnl lock,
if start modules fails then it will take the rtnl lock again while
closing the adapter which causes the UI freeze issue.
To resolve this issue, call close adapter API with indication that
lock is already taken.
Change-Id: Ic186eba794600b189021d7455a5811972280ee84
CRs-Fixed: 2013661
Presently if there is an error during the add interface, closing of adapter
and the stopping of the modules is not handled.
So, close adapter during the failure adding the new virtual interface
and if there are no interfaces running start the interface change
timer callback.
Change-Id: I807bc5b295a7faf369e8a9f1e0958eac869f189f
CRs-Fixed: 1097312
qcacld-2.0 to qcacld-3.0 propagation
Add below four keys to allow user to tune WRR TX scheduler params.
Each key is mapping to one AC defined in data path module through
OL_TX_SCHED_WRR_ADV_CAT_CFG_SPEC.
gEnableTxSchedWrrBE
gEnableTxSchedWrrBK
gEnableTxSchedWrrVI
gEnableTxSchedWrrVO
Change-Id: I5c34b604297d83673ea065243cc58c3f2180ff3e
CRs-Fixed: 1020141
HDD to send user configurations received from ini to object manager.
Common components to refer to them from psoc object using public APIs.
Change-Id: I85045ccc291e280132be4164b13d07dee4538951
CRs-Fixed: 2003447
Propagation from cld3.0-1.1 to cld3.0-2.0
Fix the log level from Error to Info since it is not
an error and also move the message out of the if block
to give more meaningful information
Change-Id: Ia25bcc5b19d5b05666038b75b9a626e69b8de68c
CRs-Fixed: 2014221
The host driver should not attempt to power collapse while pending
VDEV_STOP commands are in flight. Acquire a wakelock before sending a
VDEV_STOP request to firmware, and release it upon receipt of VDEV_STOP
response.
Change-Id: Iac90fc249e9571090df6948ed931cc07b67e938d
CRs-Fixed: 2014496
During wifi logger start if the modules are in close state,
it will access uninitialized lock.
To handle this, check module status during start of the wifi logger.
Change-Id: I10b3fffa45475c602c22b548d521f75c627b133e
CRs-Fixed: 2012742
Add new diag events for the wlan disconnection these
events will be used to inform the wlan disconnection scenario.
Change-Id: I6bdddb2d3f45deca2dc92a94e2abf59f46d7c38f
CRs-Fixed: 1108380
Add QCN IE with version attribute to probe request and assoc/reassoc
request. Add support to detect the QCN IE in beacon, probe response and
assoc/reassoc response.
Change-Id: Ieac62517b09fb5bcd2a1709a352035f422c9ce63
CRs-Fixed: 1116843
