Refer qdf_container_of() for GET_BASE_ADDR() and
qdf_offsetof() for GET_FIELD_OFFSET()
Change-Id: I15a9dff070e5fcbde504a7722e99d8d3b0b64b4f
CRs-Fixed: 3187194
If the multi-client Low latency feature is enabled
in the driver, the host includes a multi-client id
bitmap and the corresponding latency level and sends
the WMI_WLM_CONFIG_CMDID command to set the latency
level in the firmware.
FW calculates a stringent latency level and as a
response to the WLM config command, Fw sends an event
WMI_LATENCY_LEVEL_EVENTID to the host to configure a
stringent latency value.
Change-Id: Ib7a474956f39ef26e1d957b7619ebb8ac87233a6
CRs-Fixed: 3180939
Add a new field max_mcs_index in mlme_legacy_priv to save max mcs
index of current vdev.
Add a new field max_real_mcs_idx in hdd_station_info to save max
mcs index of the connected station.
Change-Id: I28908515cbe5c18c79f14f8645defd5c82e3a6f0
CRs-Fixed: 3065838
Remove the old SAP-CSR flow for start bss, stop bss and
channel change req processing which is disabled currently
under the SAP_CP_CLEANUP macro.
Cleanup the redundant checks in the deauth, disassoc
response processing in CSR.
Change-Id: I5a360fc267688b51ca645551108b65646a3c8c1a
CRs-Fixed: 3164259
Remove SME global lock use from the scan APIs as scan has its
own lock and thus no need to hold global lock while accessing
scan database.
Also cleanup unused csr scan functions.
Change-Id: I7ad5a61e69c200f9dee6b9158c4d27708fdc98dc
CRs-Fixed: 3160360
Remove redundant structures and operations in SME/CSR.
Currently, start bss request is prepared in CSR module using
csr_roam_profile, which is built from sap context.
To remove redundencies, prepare the start bss request in SAP
module and serialize the start bss request.
Change-Id: Icd468fe2a48d5324c1485d83b05e27400c9dbd9a
CRs-Fixed: 3142912
Move MLO STA-SAP concurreny handling to Policy Mgr which
is present in CSR currently.
Also, Move MLO STA-STA concurreny handling to Policy Mgr
which was part of If Mgr currently.
Change-Id: I2b8de17c3d31b43ff1f6b81a7de07b88888d7fb5
CRs-Fixed: 3153393
Remove redundant structures in CSR for SAP functionality
and add a new flow to post SAP requests from SAP module to
LIM.
Change-Id: If3339cf138140ea148bbd263960907fb3a01de43
CRs-Fixed: 3123072
Add support for below EasyMesh specific commands
1. To set user specified channels in the acs channel list
2. To trigger ACS
3. To get the ACS report
Change-Id: I1090b9a86d62eddc9954b70835c7496e5a614757
CRs-Fixed: 3080222
When WLAN_FEATURE_DYNAMIC_MAC_ADDR_UPDATE enabled and user space sets
mac address, host will detach vdev and attach again without setting
vdev tx data callback. Then host tx TDLS discovery request timeout
since lim_mgmt_tdls_tx_complete isn't called, finally TDLS link
establish failed. This change set vdev tx data callback after dp vdev
detach and attach done.
Change-Id: Iada58ba2df0612a92503ccfa5f246f7cca9db9ad
CRs-Fixed: 3112831
Remove unwanted parameters from start_bss_req and use
the parameters from vdev instead.
Change-Id: Ifea96bf7908b0dae66807b7a346684fe46fdcd4e
CRs-Fixed: 3105488
CAC duration of new channel should be able to get before CSA. During
CSA, CAC duration of new channel is used to populate max channel
switch IE.
Change-Id: I25d430d3eb663c90555ebad7a214b0789ea8c1ce
CRs-Fixed: 3102581
Currently in SAP mode, when host driver receives disconnect for
station, first it gets disconnect stats with serialization command
and then it sends delete peer command to fw. There is an issue with
this approach, if there are maximum number of clients are connected
to a SAP and all of these clients gets disconnected at the same
time, in that case there will be a disconnect stats command and
peer delete command in serialization, because of which serialization
queue gets full.
To address this issue, remove disconnect stats command from
serialization and send this command just before sending peer
delete command once peer delete command gets serialized.
Change-Id: I2fa1a5a393939eebbce796e11348fa7c040b40e8
CRs-Fixed: 3100914
Currently, MAC address update is supported only when interface is down.
Because of this framework needs to issue interface down and interface
up to update the MAC address. Interface down and up will lead to VDEV
delete and VDEV create commands to the FW.
To optimize Host-FW interactions during set MAC address, add support
to update the MAC address without bringing the interface to down state.
Change-Id: I76afa8f8c2504e8271bf689392d526f994afff0a
CRs-Fixed: 3063201
Handle SAP and MLO STA concurrency such as:
1) If MLO STA is present with both links
in 5/6 Ghz then SAP comes up on 2.4 Ghz,
then Disable one of the links.
2) If there is channel switch for sap from
2.4 ghz to 5 ghz, then enable both the
links as they were disabled by previous
operations when sap was on 2.4 ghz.
3) If MLO STA is present with both links in
5/6 Ghz and SAP, which was present on
2.4 ghz, stops then renable both the as
one of the links were disabled because
of sap on 2.4 ghz.
Also, in case where MLO STA roamed from
5 + 6 link to 2.4 + 5/6 link force scc
will happen and the disabled link has
to be enabled.
Both links should only be enabled if mlo
sta has more than one links.
Change-Id: I0fd0093b20336ae32325981589c399b44a44b64e
CRs-Fixed: 3092202
Currently there is no provision to get the calibration failure
information from the driver. Because of this it is getting difficult
to debug the calibration failure issues.
To simplify the calibration failure issue debugging, add support to
parse calibration failures events in the driver.
Change-Id: I6d831804cca259862fea3e8bb4af33d556138d43
CRs-Fixed: 3078926
This change gathers the roam event stats from the FW.
New vendor event is used to fill in the vendor attributes
whenever the roam stats are received from Firmware.
Change-Id: I9a2ddef62d26b0b68897891788733df452ac1ceb
CRs-Fixed: 3036518
PMK stale entry will be updated in driver by framework after
disconnection with AP. Since there is no connected profile
in driver no MDID is associated. On new PMKSA addition in
driver it will check for cached entry based on MDID and
remove older one. This commit associates MDID to the cache
entry from the scan result if no connected profile is
present.
Change-Id: I9e8362387a53f622b9c52c4ba994939cabf244aa
CRs-Fixed: 3030376
If SAE/H2E required by hostapd configure, it must populate in
supported rate or extended support rate set, add host driver support
to check this flag and populate it in extended support rate set.
Change-Id: Id75b5743e93a1a0f1d13150d5436d256e2ca117c
CRs-Fixed: 3016492
ARP response dropped at OSIF due to non-availability
of sta entry with MLD address.
Added sta entry in OSIF/HDD context with MLD address.
Change-Id: Iff70197ca5707b88ea80b42a60a2b1fb383f00a9
CRs-Fixed: 3017249
Currently the PS config received from kernel/userspace is set
to mac_ctx globally. This causes PS config set for one vdev to
override on the other vdev.
To avoid this, set the PS config per vdev.
Change-Id: I6a2e2a9d8fb67b94d9d5f1d4164077990bdaf4a5
CRs-Fixed: 3007060
Add configuration support for broadcast TWT support and Rx control
frames to MultiBSS HE capabilities.
Change-Id: I2b3075a21c919c120e7a1ff674ac33fdd5d73801
CRs-Fixed: 2979513
If there is single chain support then driver should disable
beamformer instead of enable
As part of fix, check the number of chains by intersecting the
firmware capability and ini config. If it is 1 then set
su_bformer, mu_bformer and num_soundingdim as 0
Change-Id: I84434c741cbf774f368657b2c57668f6e7b99991
CRs-Fixed: 3003257
When TSPEC session is deleted, the access category of the data packets
should be downgraded to next lower AC. But this is not happening due to
acm mask is not getting updated when bss descriptor is NULL.
To fix this ssue, update acm mask from bss descriptor only when beacon
IEs are not present.
Also move qos related logic to LIM and bring missig changes which were
there before connection manager.
Change-Id: I9da80cf492b01762b4cc0a7b73271a0f5fe4b4a4
CRs-Fixed: 3011069
In OKC enabled cases, when multiple pmk entries exist, the user
space sends set_pmksa command for BSSID other than the connected
bssid. In that case driver updates the global pmksa cache with
the new PMK received for the non-connected BSSID. This results
in invalid pmk sent to firmware.
To avoid this, update the pmk cache only for connected BSSID.
Change-Id: I006595ea5b913d439007a8fb9d767454a71eeac1
CRs-Fixed: 2937182
In case if TWT command (i.e setup, terminate, pause, resume,
nudge) comes from userspace and if the firmware is in below mode
1. scan in progress
2. roam in progress
3. CSA is in progress
4. any other error
then the command needs to be rejected in userspace context
Synchronize the TWT commands so that whenever command goes from
driver to firmware, then driver will receive ack event first
followed by respective event (i.e add dialog, delete dialog,
pause, resume, nudge) with below condition
1. If driver receives the ack event as successful then driver
waits for this ack event, respective event with status of the
TWT action frame over the air is expected.
2. If driver receives the ack event as failure then it will
reject the TWT command request in userspace context.
Change-Id: Ib68b89b74b5e44f28106884efd7412cee49f5bd8
CRs-Fixed: 2987978
csr has a mac address field which is redundant, the same can be
retrieved from the vdev object.
Hence remove the mac address field from the csr and update the same
from the vdev object.
Change-Id: I948cf858ddb26795e236aa4099186e5d10f504a6
CRs-Fixed: 2990480
During FT-EAP roaming after session timeout if the FTIE received
in the EAPOL of full EAP is improper, the supplicant would
disconnect the AP with the reason FTIE mismatch.
During this disconnection supplicant flushes all the existing PMK
cache entries and eventually the framework would add these cache
entries again (apparently, the current entry would be with the
older PMK). On this addition to the driver, there is no connected
profile and thus no MDID is associated to this PMKSA entry(AP1-PMK1).
Further, on the fresh (Full EAP) connection to the AP2 with the
same MDID, a new cache entry gets added and thus MDID from the
connected profile gets associated with the PMKSA cache entry. At
this point of time, there are two PMKSA cache entries (AP1-PMK1
without MDID and AP2-PMK2 with MDID).
Adding further, if the incorrect PMK (without MDID / stale entry)
i.e. PMK1 is given to the firmware on the RSO command for the
specific BSSID (here AP1) during roam, further roams shall be
calculated with this PMK1 and result in to the invalid pmkid
issue.
Thus, avoid this situation by removing that stale PMKSA entry in
the driver and this entry can be deleted only when it is associated
with the MDID. Driver on the new pmksa addition shall check for the
matching pmksa cache entry with the MDID and delete the earlier ones.
To associate the MDID, this commit checks for the same from the scan
entry of the BSSID, if there is no connected profile for the same
(this happened when the framework has added the cache entry when in
the disconnected state).
Change-Id: If81d66059173dda8d7a2940ca10dc96ef16e125c
CRs-Fixed: 2972115
CSR/SME use connect/disconnect API as these were common between
STA/SAP/NDI, but as connection manager removed the STA related code
from SME/CSR, rename the functions to represent NDI/SAP start/stop.
Change-Id: I7875e163f1976627e521308813ad3e1ed279a906
CRs-Fixed: 2981040
The following vendor cmd can be used to set the
sw retry threshold per vdev for all AC:
Aggresive: QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY
Non-Aggresive: QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY
Change-Id: I49d88ae1f3f6142d8a420fd92f6f40bf3aad03e6
CRs-Fixed: 2945913
Add new api sme_switch_channel(), which posts eWNI_SME_CSA_REQ
with specified parameters; set lim_handle_csa_offload_msg as the
handler for this new message.
Change-Id: Id015ac5f9f3674ff06d110f7a0dccd85364b3d86
CRs-Fixed: 2960191
