Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for wmi related files.
Change-Id: Ie519ca7fac2d721f87a4c9bd11507cd83ddfb504
CRs-Fixed: 2810241
Add bus related info in hif layer in order to get bus status
when hang issue happened.
Change-Id: If922e0892e0f65de778b9696bbc56fc63c25c169
CRs-Fixed: 2801350
Currently, NDP app info length is not being validated with max NDP
app info length. This may result in buffer oveflow wile accessing
NDP app info received from the firmware.
To address this, validate NDP app info length before accessing NDP
app info
Change-Id: Ifddf1afca7ecf2585e8eb450864d9ba127238f6e
CRs-Fixed: 2795961
Add host data structure and api declarations
corresponding to peer response event and register
WMI_PEER_CREATE_CONF_EVENTID in global wmi event_ids.
Change-Id: I143a4a85d079cc113397348512b0d86f500cae5b
CRs-Fixed: 2797197
Add b_twt_enable variable to enable/disable broadcast TWT in
wmi_twt_enable_param structure and use FW macro in WMI layer
to enable/disable BCAST_TWT in TWT_ENABLE cmd.
Change-Id: I892e922dda14d16019f3f433f885d1eb5b7169fc
CRs-Fixed: 2793360
For QMI events, recevid QMI event length is used to allocate wmi buffer
using wmi_buf_alloc. The received QMI event length includes WMI head
room and wmi_buf_alloc also try to reserve WMI head room again.
Because of this, WMI buffer allocation is exceeding max WMI msg length.
To resolve this, use length of the received actual WMI msg to allocate
WMI event buffer using wmi_buf_alloc.
Change-Id: Icd259988c4b1091580a35aaf2c3fabc606e0f2a9
CRs-Fixed: 2786326
Many firmware do not send wmi_ext_service bitmap in wmi_ready event
so the ext_service_bitmap will be empty in such cases. So the condition
in the is_service_enabled_tlv to check for wmi_ext_service bitmap
and return false is wrong as wmi_ext_service bitmap support is not
necessity. This condition leads to incorrect behavior in cases when
firmware do not support wmi_ext_service bitmap as is_service_enabled_tlv
returns false for every service.
Fix the above failure by addition of condition check for wmi_ext_service
bitmap only when wmi_ext2_service bitmap is supported by firmware.
Change-Id: I94d0b65e640d44f41d14de889955a6d6330e88b2
CRs-Fixed: 2786491
Reset the WMI sequence counter after FW recovery to avoid
false assert due to CE pending packets freed in htc layer
instead of WMI completion handler.
CRs-Fixed: 2787424
Change-Id: I109ff56655e5fb428aca637e6420efed5943b3f7
As part of removing gOclCfg ini, remove code used for it that is
no longer needed.
Change-Id: I00c32988cb3b852381be9810377aeefdd22454db
CRs-Fixed: 2791469
log level for some frequent prints is set to info those
logs would be present in dmesg as well as driver logs
and System performance may get affected due to excessive
logging.
Avoid redundant logs which may affect system performance
and change default log level to debug.
Change-Id: Ic8669c2d7158200e5881bc1ffd15079c8d24af68
CRs-Fixed: 2794518
Add WMI command buffer address information(DMA/Physical addr) to
the WMI TX completion logging. This will help in debugging issues
when HW DMAs copies data from a different location than the one
configured.
Change-Id: I60586b865a97e7ff88e48606806ec151321ff0aa
CRs-Fixed: 2789492
Send unified ll_stats and get_stats request over qmi based on INI
configuration.
Change-Id: Icc43352c1ba19696148619100ee27fda4d5ffb41
CRs-Fixed: 2791043
Currently driver can handle only one radio stats event,
if the size of radio event exceeds more than the size which
can be accommodated in single WMI event in that case FW needs
to send multiple radio stats events.
Add support in host to send WMI capability to indicate FW
that host supports the multiple radio events.
Change-Id: Ifb89419715c87959095c0c88a23c8dd650d456e7
CRs-Fixed: 2783251
The firmware sends a new status code to indicate an already suspended
TWT session. Update WMI_HOST_PAUSE_TWT_STATUS status code to represent
this state.
CRs-Fixed: 2786636
Change-Id: Id1fbdde8691084e408144454214d59c8ad532f9b
Log WMI work queue call stack when WD timer expires to assist
in debugging on non slub debug enabled builds.
Change-Id: Id3dd575700ca586b0738a88ca2af88a757238d1b
CRs-Fixed: 2789114
Currently ll_stats and get_station requests are sent back to back
from user space. The firmware time difference between these two commands
results in extra sleep and wakeup for Q6.
To avoid this extra Q6 sleep and wake, send both requests in a single
command from the driver if the firmware supports that operation. Cache
the get_station results in the driver until user space request reach
to the driver.
Change-Id: I5e6f42f9e3836ef4bf61d3d9220f8cedb775cbd5
CRs-Fixed: 2778479
Add peer assoc parameter 'peer_bss_max_idle_option' to
update the peer's Max BSS Idle option cap to FW.
Change-Id: If7fd4369bade8b289655c491849562c2357de877
CRs-fixed: 2781050
Host add support to send WFA test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID.
Change-Id: Id9bdec16c69a8c16cb4ce1fac87688023c768ee6
CRs-Fixed: 2772004
Firmware advertizes the capability to allocate CMEM memory for
FST via a WMI service flag; adding the support for the same.
Change-Id: Ic33bf0584f5ce4880fdfe5abe8fd4cf2a653a06e
CRs-Fixed: 2771256
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove logic to pass value of INI gRoamBeaconRssiWeight
to FW.
Change-Id: Ifa1472ef413d20d0e54649bc24dd6c8d6aac4bc7
CRs-Fixed: 2770278
Set "action" field when send WMI_THERMAL_MGMT_CMDID
to firmware. Then driver can configure the target management action
based on different customer requirement.
Change-Id: I3da5eea0d756444ede816be5cb74407863d63781
CRs-Fixed: 2767144
This records all the WMI events and commands, for all
PDEVs. Set WMI_EXT_DBG flag to enable this feature. Refer
Original Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
Change-Id: I4c9bdfe6fdd195656ca0c01ca400eba595be24a3
CRs-Fixed: 2762266
Add sequence number to each packet queued on wmi pipe and
match it against expected sequence number in wmi completion handler.
WMI packets are consumed internally, use the skb mark field to capture
the sequence number of the wmi packet.
Change-Id: I1421e3fcff0a2b326f6d899780c773950544ef26
CRs-Fixed: 2741465
Donot block wmi command sending inside #if macro.
This change is needed because WIN uses only the FW log level
setting and not the complete feature. Only the feature
should be enclosed in #if macros and not the wmi command
sending part.
Change-Id: Ia28c0487d360c1b0a54374bb237811eba6b1af41
To show formating errors at compile time, removing Wno-format flag
while compilation of driver and also handling associated errors
Change-Id: If990cc9110fe3042dd486e31d9b44fce79861e77
Make each WMI debug log buffer size configurable through
compile time config option. Now memory constraint platforms
can use these config options. Use default values if no
values are configured.
Change-Id: Ibc924e12a56ae7d529aea91e55bcc0bbce72ac7e
CRs-Fixed: 2741465
populated fils discovery, unsolicited probe response from
vdev extension stats and populated to APSTATS.
Change-Id: I762d7f36fa45f9048cf591bde3550a415e23bdcb
wmi_host_pdev_nfcal_power_all_channels_event is updated to have
number of freq, nfdbr/nfdbm.
It is assumed that number of nfdbr & nfdbm are the same.
Change-Id: I23279bde55ee42744c50b23e199b04fbc070a87f
Support WHUNT FW simulation feature.
Records all the WMI events and commands, for all PDEVs.
Set WMI_EXT_DBG flag to enable this.
Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
CRs-Fixed: 2762266
Firmware expects the channel property WMI_CHAN_FLAG_NAN_DISABLED
to be set if NAN is not allowed on any channel. Firmware shall
check the flag and decides whether to enable NAN/NDP on that
channel.
Change-Id: I8e283d2cd0f83a43e04dad142b09d519ef7f0db3
CRs-Fixed: 2760348
This will help to configure desired rate mask. It can be
used to optimize link performance.
Change-Id: I15b6fbc512d9b0869a6ad6a6f24f1593abf14dae
CRs-Fixed: 2758871
