qcacmn: Avoid excessive logging

log level for some frequent prints is set to info those
logs would be present in dmesg as well as driver logs
and System performance may get affected due to excessive
logging.

Avoid redundant logs which may affect system performance
and change default log level to debug.

Change-Id: Ic8669c2d7158200e5881bc1ffd15079c8d24af68
CRs-Fixed: 2794518

wmi/src/wmi_unified_tlv.c

@@ -1071,19 +1071,19 @@ static QDF_STATUS send_vdev_start_cmd_tlv(wmi_unified_t wmi_handle,
 	WMITLV_SET_HDR(buf_ptr, WMITLV_TAG_ARRAY_STRUC,
 		       cmd->num_noa_descriptors *
 		       sizeof(wmi_p2p_noa_descriptor));
-	wmi_info("%s: vdev_id %d freq %d chanmode %d ch_info: 0x%x is_dfs %d "
-		"beacon interval %d dtim %d center_chan %d center_freq2 %d "
-		"reg_info_1: 0x%x reg_info_2: 0x%x, req->max_txpow: 0x%x "
-		"Tx SS %d, Rx SS %d, ldpc_rx: %d, cac %d, regd %d, HE ops: %d"
-		"req->dis_hw_ack: %d ", __func__, req->vdev_id,
-		chan->mhz, req->channel.phy_mode, chan->info,
-		req->channel.dfs_set, req->beacon_interval, cmd->dtim_period,
-		chan->band_center_freq1, chan->band_center_freq2,
-		chan->reg_info_1, chan->reg_info_2, req->channel.maxregpower,
-		req->preferred_tx_streams, req->preferred_rx_streams,
-		req->ldpc_rx_enabled, req->cac_duration_ms,
-		req->regdomain, req->he_ops,
-		req->disable_hw_ack);
+	wmi_info("vdev_id %d freq %d chanmode %d ch_info: 0x%x is_dfs %d "
+		 "beacon interval %d dtim %d center_chan %d center_freq2 %d "
+		 "reg_info_1: 0x%x reg_info_2: 0x%x, req->max_txpow: 0x%x "
+		 "Tx SS %d, Rx SS %d, ldpc_rx: %d, cac %d, regd %d, HE ops: %d"
+		 "req->dis_hw_ack: %d ", req->vdev_id,
+		 chan->mhz, req->channel.phy_mode, chan->info,
+		 req->channel.dfs_set, req->beacon_interval, cmd->dtim_period,
+		 chan->band_center_freq1, chan->band_center_freq2,
+		 chan->reg_info_1, chan->reg_info_2, req->channel.maxregpower,
+		 req->preferred_tx_streams, req->preferred_rx_streams,
+		 req->ldpc_rx_enabled, req->cac_duration_ms,
+		 req->regdomain, req->he_ops,
+		 req->disable_hw_ack);
 
 	if (req->is_restart) {
 		wmi_mtrace(WMI_VDEV_RESTART_REQUEST_CMDID, cmd->vdev_id, 0);
@@ -1853,10 +1853,10 @@ static QDF_STATUS send_wow_enable_cmd_tlv(wmi_unified_t wmi_handle,
 		cmd->pause_iface_config = WOW_IFACE_PAUSE_DISABLED;
 	cmd->flags = param->flags;
 
-	wmi_info("suspend type: %s flag is 0x%x",
-		 cmd->pause_iface_config == WOW_IFACE_PAUSE_ENABLED ?
-		 "WOW_IFACE_PAUSE_ENABLED" : "WOW_IFACE_PAUSE_DISABLED",
-		 cmd->flags);
+	wmi_debug("suspend type: %s flag is 0x%x",
+		  cmd->pause_iface_config == WOW_IFACE_PAUSE_ENABLED ?
+		  "WOW_IFACE_PAUSE_ENABLED" : "WOW_IFACE_PAUSE_DISABLED",
+		  cmd->flags);
 
 	wmi_mtrace(WMI_WOW_ENABLE_CMDID, NO_SESSION, 0);
 	ret = wmi_unified_cmd_send(wmi_handle, buf, len,
@@ -4183,9 +4183,9 @@ static QDF_STATUS send_peer_rate_report_cmd_tlv(wmi_unified_t wmi_handle,
 		}
 	}
 
-	wmi_err("enable %d backoff_time %d period %d",
-		 cmd->enable_rate_report,
-		 cmd->report_backoff_time, cmd->report_timer_period);
+	wmi_debug("enable %d backoff_time %d period %d",
+		  cmd->enable_rate_report,
+		  cmd->report_backoff_time, cmd->report_timer_period);
 
 	wmi_mtrace(WMI_PEER_SET_RATE_REPORT_CONDITION_CMDID, NO_SESSION, 0);
 	status = wmi_unified_cmd_send(wmi_handle, buf, len,
@@ -12062,17 +12062,17 @@ static QDF_STATUS extract_dfs_radar_detection_event_tlv(
 	radar_found->freq_offset = radar_event->freq_offset;
 	radar_found->sidx = radar_event->sidx;
 
-	wmi_info("processed radar found event pdev %d,"
-		"Radar Event Info:pdev_id %d,timestamp %d,chan_freq  (dur) %d,"
-		"chan_width (RSSI) %d,detector_id (false_radar) %d,"
-		"freq_offset (radar_check) %d,segment_id %d,sidx %d,"
-		"is_chirp %d,detection mode %d",
-		radar_event->pdev_id, radar_found->pdev_id,
-		radar_event->timestamp, radar_event->chan_freq,
-		radar_event->chan_width, radar_event->detector_id,
-		radar_event->freq_offset, radar_event->segment_id,
-		radar_event->sidx, radar_event->is_chirp,
-		radar_event->detection_mode);
+	wmi_debug("processed radar found event pdev %d,"
+		  "Radar Event Info:pdev_id %d,timestamp %d,chan_freq  (dur) %d,"
+		  "chan_width (RSSI) %d,detector_id (false_radar) %d,"
+		  "freq_offset (radar_check) %d,segment_id %d,sidx %d,"
+		  "is_chirp %d,detection mode %d",
+		  radar_event->pdev_id, radar_found->pdev_id,
+		  radar_event->timestamp, radar_event->chan_freq,
+		  radar_event->chan_width, radar_event->detector_id,
+		  radar_event->freq_offset, radar_event->segment_id,
+		  radar_event->sidx, radar_event->is_chirp,
+		  radar_event->detection_mode);
 
 	return QDF_STATUS_SUCCESS;
 }