The wpa_supplicant disables the BTM cap in extcap IE whenever
the MBO AP is not PMF capable, or if the btm_disable conf is set.
In current host driver design, the BTM offload is disabled only for
the MBO+non-PMF case. Therefore, add change to disable the btm offload
config if the BTM CAP is not present in the (re)assoc request as this
is determined based on intersection of peer and self cap.
Change-Id: I2fdc1010bccf5ce23f4ab2177aed6c374f7a510f
CRs-Fixed: 3369096
Fix issue that driver doesn't report puncture cap to kernel and hostapd for
undefined MACRO.
Enable a new build flag CFG80211_RU_PUNCTURE_SUPPORT when kernel code
contains nl80211_put_ru_punct_supp_bw.
Change-Id: Ib375c248065b4899f2d336155b1f71a5359e6fb7
CRs-Fixed: 3356751
Currently vdev reference is not released if attribute of vendor
command QCA_NL80211_VENDOR_SUBCMD_SET_MONITOR_MODE is invalid.
Fix this vdev reference leak by releasing the vdev reference in
above error case.
Change-Id: Ib3019dc02b6a3f48fc25f4bbe40e8de9f311a4c6
CRs-Fixed: 3344228
Driver receive NL80211_CMD_START_AP to get fixed freq, width and
puncture_bitmap from EHT IE, disable punctured 20M sub channels in
regulatory component to compatible with dynamic puncture for DFS,
and send to F/W by vdev start wmi cmd, update eht op in beacon template,
Update chan width and centre freq in legacy he/vht op after remove
punctured 20M sub channels in beacon template.
Fix issue that driver can't get correct eht op IE from IE parameter of
start AP for wrong eht op max length is used.
change-Id: I085ae9d9cb4d7c65ca3a9901362903e7d5140779
CRs-Fixed: 3356750
If while roaming from 2.4 GHz to 5 GHz band with SAE
encryption, rates shouldn't be filled from the current
session/AP as this may lead to incorrectly filling rates
for instance this may lead to incorrectly filling CCk rates
for SAE Pre-Auth while roaming from 2.4 GHz to 5 GHz. As
even though with roaming offloaded, sae pre_auth due to
crypto limitations of fw has to be triggered by the driver.
Change-Id: I2293563db047e10ec8a2ade9f3b2a602cf3e3edf
CRs-Fixed: 3336853
Currently host sends many ap keep alive timeout,
mgmt_tx_rate separately to firmware.
Combine these multiple vdev set params,
send to WMI to reduce number of transactions.
Also replace target wmi pdev/vdev params with host wmi
pdev/vdev params to fix existing broken layering
violation.
Change-Id: I362770b367588220fc35508e4411635e35b3a548
CRs-Fixed: 3333872
Currently host sends many ap keep alive timeout vdev
set params separately to firmware.
Combine these multiple vdev set params,
send to WMI to reduce number of transactions.
Also replace target wmi pdev/vdev params with host wmi
pdev/vdev params to fix existing broken layering
violation.
Change-Id: I82276e1f0761629489c38c5b7a64e7f0c35e82ce
CRs-Fixed: 3333784
Currently host sends two he_range_ext vdev set
params separately to firmware.
Combine two he_range_ext vdev set params,
send to WMI to reduce number of transactions.
Also replace target wmi pdev/vdev params with host wmi
pdev/vdev params to fix existing broken layering
violation.
Change-Id: I6b83b37eb73aa3c1946c8463a335d404aa373c2f
CRs-Fixed: 3333780
Currently host sends two tx power limit pdev set params
separately to firmware.
Combine the two tx power limit pdevset params and also
bmiss cnt vdev set params,
send to WMI to reduce number of transactions.
Also replace target wmi pdev/vdev params with host wmi
pdev/vdev params.
Change-Id: I3a232b57677ad604a25d71e9ff3069814a2c338c
CRs-Fixed: 3333774
Currently wma_process_rate_update_indicate sends
two vdev set params separately to firmware.
Combine two vdev set params of
wma_process_rate_update_indicate,
send to WMI to reduce number of transactions.
Also replace target wmi pdev/vdev params with host wmi
pdev/vdev params to fix existing broken layering
violation.
Change-Id: Icc50569bcc851c5ee269558b80a560b03e1fdcee
CRs-Fixed: 3333758
Currently host sends two ndp inactivity timeout
params to firmware one after the other.
Combine these two ndp inactivity timeout vdev
set params and send to WMI to reduce number of
transactions.
Also replace target wmi pdev/vdev params with host wmi
pdev/vdev params to fix existing broken layering
violation.
Change-Id: Icaeca85f2aa074f04d268b819fe86f4b7879c25b
CRs-Fixed: 3333749
Currently host sends many pdev/vdev set param
commands separately to firmware from hdd.
Combine multiple pdev/vdev set params and
send to WMI to reduce number of transactions.
Also replace target wmi pdev/vdev params with host wmi
pdev/vdev params to fix existing broken layering
violation.
Change-Id: Ib76f5bd5f582a2c67486f6773ff6fd486b3d84cf
CRs-Fixed: 3333732
Currently host sends tx chain mask and rx chain mask
pdev set params separately to firmware.
Combine these tx_rx chain mask pdev set params,send to WMI
to reduce number of transactions.
Also replace target wmi pdev/vdev params with host wmi
pdev/vdev params to fix existing broken layering
violation.
Change-Id: I6bd27b4bc99cbe44e6bdca2a8d55050a49719673
CRs-Fixed: 3333635
While scheduler thread init and enable RSO after MLO connected,
wpa_supplicant deinit RSO for MLO disconnect.
At last, RSO is enabled on host, RSO is deinited on F/W side,
no event for RSO stop cmd, vdev0 disconnect not finished for
cm_disconnect_continue_after_rso_stop isn't called.
To fix it, hold cm_rso_lock in cm_roam_state_change to make sure RSO
operation atomic. RSO operation of one thread not preemptied by RSO
operation of another thread. RSO init and enable process of connect thread
isn't preemptied by RSO deinit of another thread, no host F/W RSO out of
sync issue will happen.
Remove ucfg_user_space_enable_disable_rso from hdd_init_station_mode since
cm_rso_lock is held before created.
Change-Id: I3010895d26a622c2a14960847089a63736598b7c
CRs-Fixed: 3365417
The kernel-doc script identified a multitude of documentation issues
in components/tdls, so fix them.
Change-Id: I365496d70e903bae1abad7b807687904f7f15af7
CRs-Fixed: 3360666
Pass the akm explicitly in the external auth
request to the userspace since there are many
SAE AKM suites.
Change-Id: Ifef8657f7ef75b402aa670813eba6adc5ab9853a
CRs-Fixed: 3355395
The kernel-doc script identified a few documentation issues in
components/dsc, so fix them.
Change-Id: I5e2f4464abb7c94ec567c864c573d314d319ea37
CRs-Fixed: 3356932
Sometimes the RX MCS index obtained from RX MSDU END is an
invalid value. From SW's perspective, the invalid value should
be disposed of. This change will handle the invalid MCS index.
Change-Id: Iba35889fa4c5ed0d0bbea4a38b5375c1197cdd37
CRs-Fixed: 3368064
Add debug log to check the issue about: scan done event
is dropped when it sends to kernel.
Change-Id: I6b06b8bb6ef809eb4399b352d048d703bebdab5d
CRs-Fixed: 3364789
mlme_obj->disconnect_stats_param.vdev_id isn't initialized before
csr_continue_peer_disconnect_after_get_stats, so can't get the cmd by
csr_get_active_peer_disconnect_command, csr_process_wmm_status_change_cmd
isn't called, so WLAN_SER_CMD_WM_STATUS_CHANGE isn't handled.
Change-Id: I6f9f3801188d5eb156826abfb9939f866d98f88b
CRs-Fixed: 3367118
On userspace query for link stats, in case of ML STA,
analyze all eligible links and send the best value of them.
Change-Id: I9d44efd24053b24e6427a96b2cd658ff8deeeb70
CRs-Fixed: 3359920
In wma_group_num_bss_to_scan_id(), bssid_list may be accessed out
of boundary.
Add check to avoid potential OOB access for bssid_list.
Change-Id: I218af0fe617f64a50c7c296c622f7fac01e1b4fc
CRs-Fixed: 3357461
Use the wlan_hdd_set_ml_cap_for_sap_intf() API to
set SL ML capable for all SAP mode interface.
Change-Id: Ieacadfd35c4588b9779ab57627d2885c944c36eb
CRs-Fixed: 3366141
Currently some channel list modifications for SAP and P2P GO mode
are present in policy_mgr_get_channel_list, whereas separate APIs for
SAP and P2P GO specific channel list modification are present, hence
keep all the mode specific channel list modifications in respective
APIs.
Change-Id: I393fbad12f29c761c1158fc5eb4ba0ebd6a660b6
CRs-Fixed: 3321108
When g_sta_sap_scc_on_lte_coex_chan = 1, SAP is allowed SCC with
STA on unsafe channel.
Use API policy_mgr_is_sap_freq_allowed to check such condition
in wlansap_get_chan_band_restrict.
Change-Id: I62b3ad83ccdfc80b5e72cad733618326e4fed936
CRs-Fixed: 3368195
The kernel-doc script identified a multitude of documentation issues
in components/pkt_capture, so fix them.
Change-Id: I9fc7922978cbfacf3f8a733561dd0f94c6cea3b4
CRs-Fixed: 3359684
The kernel-doc script identified a few documentation issues in
components/ocb, so fix them.
Change-Id: I3ddb0c4d556f459bdd15f9ae9110ae7f0bc30b2b
CRs-Fixed: 3359569
The kernel-doc script identified a few documentation issues in
components/p2p, so fix them.
Change-Id: I24e612e8976e721281a6ede4afefd20de0622599
CRs-Fixed: 3359593
The kernel-doc script identified a multitude of documentation issues
in components/nan, so fix them.
Change-Id: Ibec4c381da3088f704264d04f756d82d20613c46
CRs-Fixed: 3359549
The kernel-doc script identified two documentation issues in
components/ftm_time_sync, so fix them.
Change-Id: Iebcd1837bd80e26db6a4a5fe78d046d57f762670
CRs-Fixed: 3357062
The kernel-doc script identified a multitude of documentation issues
in components/fw_offload, so fix them.
Change-Id: I9c5b3f561d74ac433bd7f8c47cab737af9af3ecb
CRs-Fixed: 3357050
