User can configure roam hand-off delay value using the new vendor
attribute introduced as part roam vendor command.
This change gets the configured value and sends it to firmware.
And firmware delays the roam Hand-off (in msec) by the specified
duration to receive pending RX frames from the current BSS.
Change-Id: Ic328c077cba06532ee8ffed12cde072c816b92e0
CRs-Fixed: 3329964
Pcl len is always 0 if existing interface is not LL SAP.
As part of fix, return original pcl len if LL SAP is not present.
Change-Id: I51b308483364f40da03f6f9f4daea1a1f3b72019
CRs-Fixed: 3342540
Add PLD API to check whether direct_link is supported
by FW or not. Call platform driver API to get direct_link
support from FW capability.
Change-Id: Iac16427a853a3548dd49ece7a2839792e7c87e84
CRs-Fixed: 3335266
If scan is on going the target will delay the set mac address
until the scan is finished. That delay the set mac address
significantly if ROC request is on going and ROC duration is big.
Fix by cancel the scan before set mac address
Change-Id: I440bcfbc3b9699ab42d4304535cc2d86d702d21d
CRs-Fixed: 3332824
Add edca_pifs_param attribute in QCN ie. This attribute will
be use to configure edca and pifs param for XPAN.
Change-Id: Iab16c36fbdb2f66afb6c1cebee10b43d64aec4a6
CRs-Fixed: 3334861
In wlan_hdd_cm_handle_sap_sta_dfs_conc() the filter ssid length compares
against QDF_MAC_ADDR_SIZE(6), should be WLAN_SSID_MAX_LEN(32).
And if requested ssid length is greater than WLAN_SSID_MAX_LEN, filter
of ssid should clear.
Change-Id: Id4667ec7098f1f6b2ef662cab77e06b8eefecfcb
CRs-Fixed: 3324453
The kernel-doc script identified several documentation issues in
the interop_issues_ap component, so fix them.
Change-Id: Ic603071529ead8b6e884b6d7e43eb98186136162
CRs-Fixed: 3340470
vendor command is sending cfg_val to fw. This is the wrong value.
Send set_val to fw.
Change-Id: I99ed706ad270cbd55c6846b47ce88a4b4c333f51
CRs-Fixed: 3343543
When firmware attempts roaming to an MLO AP, it tries to find
the complete ML info(all links info) either through ML probe
response or beacons from all the links. It forwards all link
beacons(or ML probe response) to host as part of roam sync
indication through roam sync frame event.
Add support to fetch both link beacons and add them to scan db.
If firmware sends ML probe response, generate link probe response
as well and add it to the scan db.
The link scan result can be used in link connect in case of
hybrid roaming like OWE, 1x,..
Change-Id: Ic8457a5630441d6fd3faeb4791c79422db787f94
CRs-Fixed: 3335225
Driver will reject the association request from a peer
which is already in connected state, in this case
to fill MLO IEs in the assoc response frame, access to
already freed assoc request pointer of the peer results
in NULL pointer dereference.
If association is rejected with reason code
STATUS_ASSOC_REJECTED_TEMPORARILY, don't fill
MLO IEs in the assoc response frame.
Change-Id: I10a71d9fe7cc1bb025a6d004b29ee5236f546ec7
CRs-Fixed: 3337520
A possible case of accessing @peer variable
uninitialized in wlan_hdd_add_key_all_mlo_vdev() API
when the device mode is SAP but the VDEV is not MLO type.
Initialize the variable to default value to fix the issue.
Change-Id: Ie35333e581cadb7d5e269bc12a52ecbf7260aece
CRs-Fixed: 3341891
Encountered build failure as below:
error: stack frame size (2480) exceeds limit (2048) in
'wlan_hdd_cfg80211_get_wifi_info' [-Werror,-Wframe-larger-than]
To fix it, allocate the buffer for firmware version dynamically.
Change-Id: If768d4eccf5c6e85735c3bf3afaaf47759f0d40e
CRs-Fixed: 3343984
Set Direct link configuration if AP policy is applied.
If GAMING profile is set, disable link low power states to
reduce latency.
Change-Id: I3f8fa62542c88b293cd8442bc8266576666e05ac
CRs-Fixed: 3337252
When Vdev for direct link is up, set packets for this vdev to
route to firmware and only enter d0 WOW.
If the AP profile is HOST_CONCURRENT_AP_POLICY_GAMING_AUDIO,
prevent link to go to low power states to reduce latency.
Change-Id: I9fa2ab06983db8767d8b48b74e30602e07294fe2
CRs-Fixed: 3330207
Currently callers are calling the wlan_mlme_get_sap_max_peers() API
to get the max number of peers without initializing the output
parameter.
In case of failure in wlan_mlme_get_sap_max_peers() API,
sap_max_num_peers can have uninitialized value which can lead to
undefined behavior.
To fix this issue, initialize the output parameter before calling
wlan_mlme_get_sap_max_peers()
CRs-Fixed: 3337315
Change-Id: I83ecaf80ccee7d92a66fe561c0a1a7bd409fd64c
Introduce a new attribute to configure access category override
for UDP frames of BE/BK category. Unlike, the earlier attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_UDP_QOS_UPGRADE which will override
for all UDP frames, this attribute is for overriding only for
BE/BK based UDP frames.
CRs-Fixed: 3169564
Change-Id: I7c345c3dc7912dbfb68407e654c2c2b79bc20964
Enable MOBILE_ROUTER for qca6174 and qca6595 when
CONFIG_ARCH_SA515M is enabled.
Change-Id: I26147521d9ad4c180a10589ec82319620d68435b
CRs-Fixed: 3339312
Add initial version of QMI files that are used for
communication between WLAN host driver on APSS and
WiFi driver on LPASS.
Change-Id: If7352490d73457479e85958b90066f9c397bb310
CRs-Fixed: 3328378
NR_CPUS may be configured as 512 by CONFIG_NR_CPUS. Then uint8_t
is not a proper variable type to do for operation.
Change uint8_t to unsigned int to avoid dead loop.
Change-Id: Ie159bcf09e190c635c1105ccd551fb3c601cc5a2
CRs-Fixed: 3338268
Currently probe request is sent every 200ms during join timeout
this can lead to 16+ probe req, send during join time.
Change logic to send max 5 probe req during join time,
if candidate freq can lead to MCC concurrency scenario.
Change-Id: I7956771e2cf6724754f59c6db5b07fb45426ae41
CRs-Fixed: 3338329
In lim_process_pasn_delete_all_peers, wma handler and vdev pointer
are dereferencing without check, may be points to NULL.
Add check to avoid NULL dereferencing.
Change-Id: I9bd047051d05ccd9709e228c37003079ec7e2732
CRs-Fixed: 3327338
Check for NULL pointer when accessing STA node from Hash Table
struct sDphHashNode.
Change-Id: Icec382526f0397c3ccb048120967aee0a8285d7e
CRs-Fixed: 3337661
Display Runtime PM last busy stats periodically, this helps
to debug runtimepm issues even without dump availability.
Change-Id: Iae9b70ed49b94a4e098d87a0a00e539178f3c35d
CRs-Fixed: 3337901
With the recent change in feature set information related
to 11kv version info, host driver needs to update the
feature set version info as well.
With this change, update the feature set version info.
Change-Id: I50a4df5769cd702eda5d1bc69ac9aad07d87269a
CRs-Fixed: 3334882
Fix two compile issues:
1. wlan_hdd_transport_mode_cfg defined not used if
enhance CFR not enabled.
2. incompatible types for hdd_objmgr_get_vdev_by_user
function.
Change-Id: If52fe33f9181f6e66d0c1af3c02a71a9df175281
CRs-Fixed: 3338995
For kiwi_v2 target increase the value of max MLD dev contexts
to three. Define WLAN_UMAC_MLO_MAX_DEV with the new value in
kiwi_v2 defconfig file.
Change-Id: If9f86cbf5c98f69b9f56b0e4226fcf26f2b663c3
CRs-Fixed: 3337651
