Filter roam scan channel list or frequency list as per the
band received from upper layer via attribute
QCA_WLAN_VENDOR_ATTR_SETBAND_MASK and
QCA_WLAN_VENDOR_ATTR_ROAMBAND_MASK.
Change-Id: I4820bfc487949d8445f215a4779dd671925d001f
CRs-Fixed: 3009758
Whenever host Receives vendor command for SETROAMBAND, Host should
set PCL list as per roam band to fw so that FW can use updated pcl
list for further roaming.
Change-Id: I2f48833801b75f25aaf37ea479867b19477ceecb
CRs-Fixed: 3009751
Process the BAND_MASK attribute which comes to the
host via the QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET
vendor command. Save the value of this band mask into
the RSO configuration structure.
Change-Id: I57ecc10912a38207ef478b38cf3add3c584dd2f4
CRs-Fixed: 3009749
When getting rnr IE information, instead of getting rnr pointer through
input parameter, we can just return rnr pointer.
Change-Id: I7215451d34164d40d6404d0a426f1cc30a143e15
CRs-Fixed: 3025191
This change removes the "delete pmksa on BMISS" logic in commit
I5d8ec9e9d4f8a44178b113d370799fe2bc0373fb.
Will handle the issue in new commit by OUI checking of AP.
Change-Id: I871999f8c473afdc75b774210044fc059fcd07b0
CRs-Fixed: 3021068
Add sanity check for index with NUM_CHANNELS and pcl_sz
when add 2.4G channel list.
Change-Id: I04ac1bcdb6720a4740be7c2f5e08f76b3c34d8c4
CRs-Fixed: 3025000
Currently, wmi_roam_pmkid_request_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I3fad4e4d7ceeb85c632723e161809bf980d5375f
CRs-Fixed: 3014248
Currently, wmi_roam_auth_offload_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I128db23077d423c5e5ecf27636bc3af35cbbc58f
CRs-Fixed: 3010419
SAP/GO D3 WoW feature is not supported when IPA is enabled and hence
disable SAP/GO D3 WoW features when IPA is enabled.
Change-Id: Ia3da37087a0ca79c81c546f43a0893e46cf08c3c
CRs-Fixed: 3015104
Add support for sending WMI_REQUEST_THERMAL_STATS_CMDID
to request for the thermal stats via vendor cmd:
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS
This vendor cmd can either be used to clear the thermal
stats or to request for the thermal stats.
Added ini gThermalStatsTempOffset, which can
configure thermal temperature offset value for capturing
thermal stats in thermal range such as Thermal STATS
starts capturing from temperature threshold to temperature
threshold + offset.
If this ini is set to 0, then the events are disabled.
Also, add support for the FW event where the requested
thermal stats are sent in FW event
WMI_THERM_THROT_STATS_EVENTID().
The following attributes are sent in the events for every
level:
STATS_MIN_TEMPERATURE
STATS_MAX_TEMPERATURE
STATS_DWELL_TIME
STATS_TEMP_LEVEL_COUNTER
Change-Id: If8acdeec5bde33be346332ccaf39d78d0151203d
CRs-Fixed: 3016818
User configuration support to use scan request BSSID value
in Probe Request frame RA during the scan.
Change-Id: Ie0b7620428e1bfbd51e7430b6b7ad23ebede9e67
CRs-Fixed: 3021525
In roam invoke request, if bssid is same as connected
bssid use connected frequency.
Change-Id: I0e205ffab002b80021bf6a615e4cfc0a723f0ba5
CRs-Fixed: 3022351
Enable the firmware module WLAN_MODULE_WPM with error log level
in wow mode by adding default values in the ini gFwDebugWowModuleLoglevel.
Change-Id: I53a729bde6cfb6d8141864472718a2d8da9efead
CRs-Fixed: 3022434
Populate assoc assoc link id in ML IE of an assoc request from
scan cache entry
Change-Id: I82b2b68f45411b1588c76ddd7ce9d21a93d972f3
CRs-Fixed: 3013684
-Extract new wmi struct added as part of MLO roaming
changes.
- Send EHT and MLO weightage percentage to FW via
WMI_ROAM_AP_PROFILE.
Change-Id: I6b3f1f62ef6ea323cd1b75f63a5c63c38b000f1f
CRs-Fixed: 3010039
Currently, wmi_roam_stats_event_id data is extracted and
processing is also done in wma. This is not inline with component
model where target_if takes care of data extraction and handover
the extracted data to corresponding component(connection mgr in
this case). Add changes to support the same.
Change-Id: I5e336b01e1a2183e49b3e6eeb125c7c9fd0fd73c
CRs-Fixed: 3003125
The purpose of the multicast Domain Name System (mDNS) is to resolve
host names to IP addresses within small networks that do not include
a local name server.
It utilizes essentially the same programming interfaces, packet formats
and operating semantics as the unicast DNS, and the advantage is zero
configuration service while no need for central or global server.
Based on mDNS, the DNS-SD (Service Discovery) allows clients to discover
a named list of services by type in a specified domain using standard
DNS queries.
Here, we provide the ability to advertise the available services by
responding to mDNS queries.
Change-Id: Id2a0468d49237c21062cfd1988e34903658cdad9
CRs-Fixed: 3008549
When driver gets rrm request it tries to get country from beacon IE
and if country is not present in beacon IE it sets the current
country information from regulatory and does not sets the op class
which is not the right way.
If AP does not send country in beacon IE, driver should set
GLOBAL_OP_CLASS for rrm request.
Change-Id: I4797d03f38817ac580f3bfea08f1939dad4da5d1
CRs-Fixed: 2996921
Currently, the WLM mode could be recovered after disconnection
or interface down/up about random MAC feature. Since some OEMs
have different mechanisms to config WLM mode on their framework
implementation and don't expect recovering the WLM mode.
So add logic to set default WLM mode when disconnection happens.
And add ini wlm_latency_reset_on_disconnect to differentiate
the implementation in driver. By default
wlm_latency_reset_on_disconnect is false.
Change-Id: Idcb3baf6ab8f0533eb01c28ff1c12513f9995946
CRs-Fixed: 3006875
Fixes in this change include:
- Add debug prints
- Don't disable roaming in case of MLO link connection
- Minor compilation fixes
Change-Id: I0aa9e8b2fd634b6dba1926796d95db997946aac3
CRs-fixed: 3013039
Add configuration support for broadcast TWT support and Rx control
frames to MultiBSS HE capabilities.
Change-Id: I2b3075a21c919c120e7a1ff674ac33fdd5d73801
CRs-Fixed: 2979513
Currently addba response is not updated with ini configured rx aggregation
size.
This change is to reject peer addba request if rx aggr size is 1 and
for other sizes select min value of peer and configured sizes.
Change-Id: Ia375b1e031dfecf948429e0baea19faa8fe42ffa
CRs-Fixed: 2962314
When TSPEC session is deleted, the access category of the data packets
should be downgraded to next lower AC. But this is not happening due to
acm mask is not getting updated when bss descriptor is NULL.
To fix this ssue, update acm mask from bss descriptor only when beacon
IEs are not present.
Also move qos related logic to LIM and bring missig changes which were
there before connection manager.
Change-Id: I9da80cf492b01762b4cc0a7b73271a0f5fe4b4a4
CRs-Fixed: 3011069
In LTE coex SAP restart scenario, currently SAP new channel is selected
base on 20M bandwidth, and channel bandwidth is determined after
channel frequency determined, if new channel bandwidth is greater than
20M, it is possible channel boundary fall in unsafe channel range,
because bonded channel is fixed with different bandwidth.
If select new primary channel with determined bandwidth, it would
violate MCC to SCC limitation if concurrency, to make it simple,
just shrink SAP bandwidth to 20M if check unsafe channel failed.
Change-Id: Id9bc5e6e807c0446138ca816bc3ada22443fe7a2
CRs-Fixed: 3005333
For roam scanning, "specific channels list" is preferred over
"preferred channel list". Hence if user configured specific channels
then return invalid for ADDROAMSCANCHANNLES command.
Change-Id: I858eef5c990cedb4b12c21c1a00f34ff6b819849
CRs-Fixed: 3014609
Peer addba request is rejected when reject_addba_req is set from
ini or vendor command.
Current reject_addba_req ini is replacing with gRxAggregationSize
when it is set 1 from ini.
Hence this reverts commit I80a4b78c1af77f5bfa68be3163f9e9a78cc64245.
Change-Id: I1cc57b88311da4dd8f26eade17072aaa1f0ebb59
CRs-Fixed: 3002204
Fix AP+AP IPA offload path failure when NAPI over IPA enabled on mdm
platforms by adding QCA_CONFIG_RPS check.
QCA_CONFIG_RPS is same as CONFIG_RPS, default Y, but depend on CONFIG_SMP
as msm-5.4/net/Kconfig.
For AP+AP mode,
For LA, CONFIG_SMP on, then QCA_CONFIG_RPS on, use IPA exception path.
For mdm, CONFIG_SMP off, then QCA_CONFIG_RPS off, use IPA offload path.
For IPA napi enable status check, just use qdf_ipa_get_lan_rx_napi,
don't need MACRO IPA_LAN_RX_NAPI_SUPPORT.
Change-Id: I6b16f2a830d4e7829c9e539896ed2977895d367e
CRs-Fixed: 2992393
Currently, the SAE authentication request retry happens
after a fixed timeout of 1 second in a STA DUT.
To make this timeout user configurable, add an INI to
configure SAE auth failure timeout.
Change-Id: I3a3944ab14564a944e0c83cc31a92847b5e8c5e0
CRs-Fixed: 3011892
Currently, If supplicant sends tx_mgmt request with random
mac_addr then driver adds the random mac_addr and sets this
random mac_addr to firmware via
WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID command. Driver waits
for tx_ack or tx cancel wait to complete and then remove the
cookies and start timer to delete the random mac_addr.
In case after receiving tx_ack, driver removes the cookie and
starts timer and before timeout supplicant sends the
tx_cancel_wait request. But driver can't update the timer
duration as the cookie was already deleted as part action frame
tx completion.
Fix is driver will remove the cookie with below condition:
1. If driver receives the tx_ack and the wait duration = 0 then
no need to start the timer, remove the cookie and also remove the
random mac_addr from firmware
2. If driver receives the tx_ack and the wait duration != 0 then
start the timer
3. If driver receives tx_cancel_wait then stop the timer and
remove the randon mac_addr from firmware
4. If timeout happens then remove all the cookies for the random
mac_addr and also remove the random mac_addr from firmware
Change-Id: I3e227213239e865582e5d8674260d049c437aa9b
CRs-Fixed: 3002851
Add 320MHz support in cm so that connection info can reflect
correct 11BE 320MHz bandwidth.
Change-Id: I44772472bf9e64af0e47ad71ca7d29d1ff90daed
CRs-Fixed: 3009311
Based on new requirement, add aliasing for gNeighborLookupThreshold
ini and update the range of this ini as well.
Change-Id: I0a62e209d6a62001d6aec48849c4900062ae5bc7
CRs-Fixed: 3011060
Currently driver has only one name for an INI, with
this change add second name as well for few INIs based on
new requirement.
Change-Id: I6eee13935d1c5c74794027b88d94cbb572339e9e
CRs-Fixed: 3007209
The RRM request may have different country code with DUT internal
regdb configure, use country code from beacon IE if it is present,
otherwise use internal country code to verify op class of neighbor
report channel list.
CRs-Fixed: 2997474
Change-Id: I35a62d9791f08d26dd8a892739612eb422805523
When firmware sends Roam synch indication, driver changes the
roam offload state to ROAM_INIT and after set key completion is
received, RSO start will be sent. But if EAP/EAPOL fails and
disconnection is triggered then deinit command is sent without
setting roam scan mode to 0 with RSO stop command.
So change roam offload state to RSO_STOPPED if auth status is
connected in roam synch indication.
Change-Id: If8f56ce48500f6848fa917854b6252f8deb67c01
CRs-Fixed: 3005697
This reverts change Id8134003e6f7a3e0368b20c496f650e0b7025b9e
Moving cp stats to scheduler thread is breaking the
synchronization in stats collection. Currently, when a get stats
command is issued from framework, host driver sends the same to
firmware and wait for both llstats and get_station related stats.
The expectation is to receive get_stats first and then llstats.
Host driver has a wait for the last llstats event to return the
stats to userspace. As the cp stats(get_station stats) are moved
to scheduler thread, the order of these events can't be ensured
as llstats are still running in kworker thread. llstats event gets
processed before cp stats mostly and stats are returned
immediately to framework. Framework may issue the get stats
command again and the same is sent to firmware, which may result
in synchronization issue in firmware as well.
Moving llstats also to scheduler thread may not be optimal as these
are aggressive and can be queried by framework multiple times with
a milliseconds gap.
So, move back the cp stats to kworker thread to maintain
synchronization.
Change-Id: I8dc518f0de37e7cc203cb1f6e67045d74b304d93
CRs-Fixed: 3002534
Populate mlo IE for assoc req with inheritance mode.
populate base rate, extend rate, capability, extend capability
and HT/VHT/HE/EHT capability based on mac context.
Change-Id: I5e1c350a9c5f23a63d11c6d4b5cdbf0422dd53e0
CRs-Fixed: 3000895
In case of STA + STA concurrency, enable roaming on
another interface only if STA + STA concurrency is in
DBS.
Add sanity for SCC concurrency also along with MCC
concurrency in cm_roam_switch_to_init.
Change-Id: I8787828b4b950c355e9bf70af58aad7779de3e9f
CRs-Fixed: 3001723
MLO sta needs mld mac and assoc link information to create bss peer
Get mld address and assoc link info from connection manager and pass
it to bss peer creation
Change-Id: Ie04d4eb01f1a039f068b32b6c53aa3e65c919518
CRs-Fixed: 2987483
