As part of debug enhancement Print ring information in
htt srng init and htt srng cfg
Change-Id: I59a7831b6ded1028b3a8f246656e982ae7de5b86
CRs-Fixed: 3133836
Update enhanced Tx stats from Tx HTT PPDU completion path in WKK.
Define and use function pointers for architecture specific
functionality.
Change-Id: I4ba443647dbd81c83e899c0f88c5d9a4cc695e14
CRs-Fixed: 3132255
Use CONFIG_REG_ 6G_PWR_MODE for the new API.
Use "_for_pwrmode" as suffix for the new functions.
Change-Id: I9b84944a59062277b76bc48877c47ea5afada0ec
CRs-Fixed: 3133023
The consumers of the current channel list may want to search through 6G
channels that are not part of current channel list and belong to channel
list of different power mode.
Therefore, replace the regulatory current channel list with that of 6G
power based channel list.
Change-Id: Ie2ff8bbfb50a5f95f584b134b18246cb28b1c406
CRs-Fixed: 3110987
Fix partner link updation in scan entry when AP MLD has more than one
partner link.
Change-Id: I981f16c9de819390d6830ffe7a5b1e438a4f8403
CRs-Fixed: 3125861
Define macro for maximum mcs values for 11AX and 11BE.
Also move bandwidth enums to cdp header file.
Change-Id: Ic24b9fa459b160702fa35162955c6bcdf678c97f
CRs-Fixed: 3134964
Rate statistics are updated at both peer and vdev level in Tx HTT
and Rx monitor path.
As per peer optimization changes, macro DP_UPDATE_EXTD_STATS is used
for aggregation of extended stats and this macro is used for both peer
and vdev stats query.
With this approach, when user requests for vdev stats, then rate stats
for vdev are updated with the rate values of the last peer present in
peer list of vdev and this results in wrong output.
In order to fix this, add an API to update the rate stats for vdev
separately.
Change-Id: I546a130e84f7fd577b80ace24e1dbb71000c0698
CRs-Fixed: 3132195
Add 64 bit extraction macros for Tx since many monitor
tlvs in QCN9224 use 64 bit offset and shift masks.
Change-Id: Ibf910d876d2305ae8eb16955dab1ed2dd9d66290
During undecoded mode capture reset expected to reset
only phy error filter flags. But disabled monitor mode
capture filters as well. This resulted a backpressure
in monitor mode destination ring.
Added an appropriate check to disable only phy error
filter without disturbing monitor mode filter setting.
Change-Id: If3ef8e9f41f32dff30773aeb939256920c515800
CRs-Fixed: 3137636
Define API to get the link peer_id using peer_id and lmac_id.
This is required in Rx monitor path for stats updation as Rx
monitor provides MLD peer id, whereas stats updation is done
for link peer.
Change-Id: Ib1c9e2729ccaea2e28272b7d175b3ef7fba9fd7a
CRs-Fixed: 3133003
Add support for subelement defragmentation in the common handler for
generating link specific (re)association request/response, as well as
in the helper for parsing partner info from the Link Info field of the
Basic variant Multi-Link element.
CRs-Fixed: 3117210
Change-Id: I3727c9008043ac4132a8675bf15e73949fde63cd
Move to qdf_debug API to avoid excessive logging.
As these logs can come in interrupt context, it can cause
latencies to other threads.
Change-Id: Ibcada15235a74e9534588ae08d21bf97f4d61393
CRs-Fixed: 3120558
Include relevant header for MAX_SESSIONS and use
the correct build flag to retrieve session params.
CRs-Fixed: 3136148
Change-Id: I28ef98a67cbe479c5d8be93c49f9ae6ce63ba982
Add support for Multi-Link element defragmentation in the common
handler for generating link specific (re)association request/response,
as well as in the API for getting per-STA partner link information.
CRs-Fixed: 3116412
Change-Id: I237c593b44ec3a7c3347ccb95633cec362ba5411
When host sends TWT disable command to firmware, send reason code
also as part of it. So that firmware will check and take the
following action:
a. If host sends disable due SCC/MCC concurrency then firmware
will teardown the existing TWT session and send the teardown
reason code as concurrency to host.
b. If it's for other reason then it will take action based on
that.
Change-Id: I5b4584a964f142d17aef5629adeb12e686fd983c
CRs-Fixed: 3098862
Enable usage of delta_tsf for SAWF. This will be used to compute tx
delay. Also, add support to update sawf stats in tx completion.
Change-Id: Idab7fbd5217175167ecdeee21cf5dc9daf1415d6
CRs-Fixed: 3135773
Add Legacy interrupt changes for Beryllium target. Added code to initialize
legacy interrupt for Copy engines and also to request irq for hif group.
Change-Id: Idb5635d376b9dfcf1e4c595a829d7bef467870b4
Currently, total_weight is not initialized before calculating
default ML BSS weightage with INI configuration. This may result in
unexpected behavior.
To resolve this, calculate ML bss weight after calculating non-ML
BSS score weight.
Change-Id: I4b9455e0ce69dec5c837f92acad60ac83cdd2502
CRs-Fixed: 3127454
Extract all the parameter provided as a response from the firmware
for the TSF action command.
This could be used to calculate the difference between the TSF
and TQM clocks
CRs-Fixed: 3136492
Change-Id: I8377bd177f5ea246c9b7939315509ab0b6f2051c
Add WMI ops for SAWF WMI commands
1. Config service class
2. Disable service class
CRs-Fixed: 3118070
Change-Id: Ie21fcfb1f25d2195eee679307e8970ccdda9992f
Export objmgr APIs to be used by SON module to register
and unregister create/destroy handler.
Also add lmac_if API to register lmac_if ops from SON
module.
Change-Id: Id4c19807792b9f7b46387ae907f853151e4e28c6
CRs-Fixed: 3118986
Add HAL APIs to access TX fields to override default flow
classification by hardware.
Change-Id: If2eb0c5a966f87081a7714836c2c4bc0bd47fa86
CRs-Fixed: 3114311
Add a single bit "is_critical" flag to qdf_nbuf_cb structure to indicate
critical frames to DP layer.
Change-Id: I41c67467a3a54eef55c81a80dfb86b3ad7f33518
CRs-Fixed: 3114311
Currently we are not checking whether the packet is a IPV6 packet when
checking for a DHCPv6 packet. This can be error prone if done for a IPV4
packet.
Check for IPv6 before checking for DHCPv6.
Add QDF_NBUF_CB_PACKET_TYPE_DHCPV6 packet type in qdf_nbuf_cb.
Change-Id: Ic24dbaad8bd910c85bb1086317c12ad46466a128
CRs-Fixed: 3114311
dp_is_hw_dbs_enable() is checking DBS and update number of
MAC rings value, current function name makes confusion.
rename it to dp_update_num_mac_rings_for_dbs().
Change-Id: I82540a943445560a99e27067e58d59035147208b
CRs-Fixed: 3131546
Ageout flush does not happen for WBM2SW4 if there
is only one TX completion pending in FIFO and all the
other WBM release rings are not active. This is due to
an issue in HW and this prevents suspend to happen due
to pending tx completions.
Fix is to avoid using WBM2SW4 release ring and instead
reuse WBM2SW0.
Change-Id: I250d8c9d460895449939212ebdb7abd62edb0234
CRs-Fixed: 3124733
Currently, the code does not handle an MLO connect when in
non-init state. Add logic to clean up any existing connection
before going ahead with the latest request.
Change-Id: Ia5a10bcc1e0d2c8e82d6ea0d82d1a5bf0604a1e5
CRs-fixed: 3116687
check null pointer for soc return val and
check array index input for out of bound access.
Change-Id: Ib1d52f70128eaf9ba24e9024440490e470fec3d4
CRs-Fixed: 3127451
While notifying the ML connection status to the supplicant, partner vdev
information will be filled in the connect response. This partner vdev info
is populated using partner link IDs. This may cause issues since it is
not guaranteed that link id information in the partner vdev is valid while
notifying the connection status to the supplicant.
To address this, get partner vdev information using vdev ID instead of
link ID.
Change-Id: I5e45b038b1fe5b6ab9c6bbb514eefb0ad4c39e66
CRs-Fixed: 3117702
Currently pn-check logic for OOR frames does not take into account
the security mode. For open mode case, BE hardware does not populate
current and previous pn_numbers. Hence a PN-check comparison may yield
incorrect results.
Check for secure mode, before checking for PN numbers.
Change-Id: I398872d467058bc1ee1d04c811818ea20c5aec7e
CRs-Fixed: 3129986
Add debug prints to display the parameters of
WMI_VDEV_SET_TPC_POWER_CMDID sent to the target.
Change-Id: I4759d04d2b9293d7f5f61c173679f8fb2b7ff941
CRs-Fixed: 3130926
Bifurcate the hal_get_reo_qdesc_size to corresponding lithium
or Berillium platforms.
This can handle difference, if any between them and later enhance
to set the qdesc size based on peer negotiation.
Currently for NON_QOS_TID, the BA window size is hardcoded as
256 for Li and 1024 for Be.
Also modify hal_reo_cmd_update_queue_params to accommodate higher
Block-Ack Window size. For this steal bits from pn_size and use
pn_size values as macros PN_SIZE_XX which is only 3 bits,
instead of 8bits.
Change-Id: If310175da579aa3a47a8b031a1774c6c8982d4b2
CRs-Fixed: 3125986
Disable monitor mode on sdx65,it will save 5MB buf,
and improve iperf performance.
Dp_rx_buffer_pool_refill is used monitor mode in
MCC, and rxdma1_enalbe=0, we don't need this logic.
But in WIN side, only monitor mode need this logic,
and rxdma1_enable will set true.
Add func dp_monitor_pktlog_reap_pending_frames and
dp_monitor_pktlog_start_reap_timer in dp_internal.h
for compile issue.
Change-Id: I43fee6d7a1836063a7539c3bd4745eef15a4e4b2
CRs-Fixed: 3129542
Ignore peer if it is missing txrx_peer in reinject path while
going through the peer_list. This condition can hit when the
peer_setup call from the control path is not yet received for
the peer.
Change-Id: Ie57d07353f33749a439415d808fc010702c3c884
CRs-Fixed: 3130821
Add support for EHT PPE threshold's. Store 2G and 5G thresholds received
in service ready. Fill peer PPE thresholds for EHT peer.
Change-Id: Id5c8310cbf34c59a3d88072b37ce3f871354ed17
CRs-Fixed: 3128586
Operating class field used in RNR IE is of global operating
class. When getting frequency from RNR IE region specific
operating class is used for lookup instead of global.
Added changes to search operating class from global OC
table.
Change-Id: I200ab46187fed91cc66cd954b062c8d8ac44f631
CRs-Fixed: 3131600
