When downscale blur feature is enabled, calculate the mixex and crtc
width and height using the dnsc_blur's src width & height. Update the
sde_crtc_get_mixer width/height functions to return the correct size
based on the features enabled.
Change-Id: I52dd88cc52e1ca5cb37e381e92e0e3032e7b090f
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add changes to configure the downscale blur hardware block based on
the conifgs set by user-mode. Program the ctl's writeback flush and
active bits when dnsc_blur is enabled. Bind the pingpong block that
feeds pixels to dnsc_blur hw block. Disable the active bits and unbind
the pp block binding during wb disable.
Change-Id: I1961ab437e344b13d0c186c1675a5bf79b84ea74
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add downscale blur connector properties to expose the hw block count,
downscaling filters used and the ratios supported. Add a custom dnsc_blur
property to allow usermode to send the required configuration to program
the hardware. Expose only for the virtual connector as the dnsc_blur is
only supported with writeback block.
Change-Id: I35dd263d9d5aafdb59bacbb3a0528ffd2bcaf6a3
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add sde catalog entries for the downscale blur supported filters
and the corresponding downscale ratios. The PCMN supports ratio
from 1 to 128 and gaussian filter supports specific ratios in the
range between 8 to 64.
Change-Id: Ifdf1a8fc7cfc5f5bd1297f10c7946c2bf9b63dcd
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Extend the topology_control connector property to support downscale
blur block. This gives user-mode the capability to reserve the downscale
blur block. Add sde rm changes to reserve the block based on this
connector property during sde_rm_reserve.
Change-Id: Ica2d7c57e6f528eb917acb6aae7e860352895a06
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add device tree parsing code for downscale blur block and sub blocks.
Add restrictions to allow downscale blur block to be used only by the
writeback. Set allowed interfaces for the block while parsing from
device-tree to restrict usage.
Change-Id: Ifa4c89ec52863d245a40bd4715a4e31f542b8117
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add sde ctl hw changes to support downscale blur. The ctl flush/active
bits for downscale blur are part of the writeback flush/active bits.
Add a new ops to update the dnsc_blur flush mask.
Change-Id: I29483ab399c5503ef4cfe5804d25cd26ad6265b2
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Downscale blur HW block support is added from MDSS 9.x. The block
can be used to downscale the layer mixer output before feeding it to
the writeback block. It can be used for both writeback & concurrent
writeback usecases. Add hw files and the respective blocks in sw to
program the downscale blur block.
Change-Id: Ic5787e1655eff5ef0960b7569e48d2f35d23bfc9
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Define the data structure and relevant flags for user mode program
to configure the downscale blur block.
Change-Id: Ic2916f5ac8626b93ab8b7adc7270f1e4bf1ec23a
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This change adds support in mdp and dsi driver to support
multiple SIS.
Change-Id: I432068cea17e1784d7570a472fbadaa86695df07
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Commit bfb91aa ("Fix a null pointer access in msm_gem_shrinker_count()")
moves the point at which msm_gem_object is added to inactive list. Moving
this ensures that initialization will be complete before adding the
object to the list.
This change makes commit bfb91aa adaptive for both kernel-5.10 and
kernel-5.15.
Change-Id: I8efb66e239e2f8f56a3989370a58b96932a19f76
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Commit 45160ca ("disp: msm: use linux IRQ interfaces instead
of DRM helpers") update the msm layer to use linux IRQ interfaces
as DRM IRQ helpers are removed in 5.15 kernel.
This change uses macros to control the calling of correct irq interfaces
for kernel version 5.10 and version 5.15.
Change-Id: I367021df783c0aa02f729920b673e6f1f7397e65
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Commit bf0d220 ("disp: msm: dsi: add _NO_ to MIPI_DSI_* flags
disabling features") update names of DSI flags to follow upstream
convention. Purpose of the name change is to more clearly indicate
what is not supported when the flag is set.
This change puts macros around MIPI_DSI_* flags to adapt the name change
of flags for kernel version 5.10 and version 5.15..
Change-Id: I1c9a8da3819a6b641ca9b6d81191bc944913b49e
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Commit d1d1173 ("disp: msm: update msm_gem ops and remove unused
drm_driver callbacks") Update msm_gem and msm_drv to comply with
latest 5.15 kernel.Modify dma_buf_vmap() and dma-buf's vmap callback
to use truct dma_buf_map. Rename dma_resv_get_excl_rcu to _unlocked.
Remove deprecated GEM and PRIME callbacks.
This change adapts all the interface change for kernel version 5.10
and version 5.15..
Change-Id: Icb495dc4e5d20999f773ed5881eff233ff3a48bc
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Commit 283560c ("disp: msm: dp: use Extended Base Receiver Capability DPCD space")
pass additional parameters to supply maximum lane count and rate to MST topology
manager. In cases where sources have lower maximum lane count or rate than default
MAX_LINK_RATE, these values will be used instead.
This change puts macros in the callers of function drm_dp_mst_topology_mgr_init to
handle interface change between kernel version 5.10 and version 5.15.
Change-Id: I394c70640606de477d67b08cafb495bebb6c549f
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Commit ddac29b ("disp: msm: Pass the full state to crtc plane and connector
atomic functions") pass full state to crtc, plane, and connector atomic
functions and retrieve drm_crtc/plane/connector_state within the atomic
function.
This change puts macros in the callers of atomic functions to handle API
changes between kernel version 5.10 and version 5.15.
Change-Id: I8e710e33f0a149bbfaa54820a7174a05810e2da4
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Commit 1ef7ff2 ("disp: msm: dp: pass drm_dp_aux to drm_dp_link_train* APIs")
passes additional parameter drm_dp_aux to drm_dp_link_train APIs in order
to use drm_dbg_* within those functions.
This change put a macro in the drm_dp_link_train* APIs caller to handle API
changes for both kernel version 5.10 and version 5.15.
Change-Id: I9fd22e0effbe87b6cfecf72b38a10d74a2c0c5ea
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Extend the existing sys_cache_enabled debugfs node functionality
to enable/disable all the display related system cache. Boolean
property is converted to integer and each BIT is associated with
a system cache.
Usage:
enable SYS_CACHE_DISP:
echo 1 > /d/dri/0/debug/core_perf/sys_cache_enabled
enable SYS_CACHE_DISP_WB:
echo 2 > /d/dri/0/debug/core_perf/sys_cache_enabled
enable both:
echo 3 > /d/dri/0/debug/core_perf/sys_cache_enabled
Change-Id: I41eaacc4d3f448bb566993b20aa74caa979f1258
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add a cache_flag in msm_fb object to store the system cache state hints.
Writeback connector will store cache write hints if system cache write
is enabled while HW is writing into this buffer. Plane in the primary
display path, in a 2-pass composition strategy will use this cache hints
to enable the display HW to use system cache for reading the pixel data
from this buffer.
Change-Id: Iff92a453a36d4a60b5a0162832eebd5e8739b5c3
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add a custom cache_enable property in writeback connector to allow
user-mode to control the cache setting on a frame basis. Configure
the hw and activate/deactivate the llcc based on the property. The
custom property is added based on the availability of the system
cache for writeback.
Change-Id: I812b31955eb36c75c33ac279b56502a13f7cdcbf
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add support to enable writeback block to use system cache for writing
the output buffer. This is useful in cases where output is routed to
primary source pipes with 2-pass composition. The implementation is
modelled based on existing pipe based cache configuration.
Change-Id: I2b9a96c5b42eb5727d11ca0f337aeeb4e69362c9
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
From MDSS 9.x, the pp-done wait requirement as part of autorefresh
sequence is not required. Add a catalog flag to avoid the wait for
mdss 9.x+ and to support backward compatibility.
Change-Id: Ieca008d3d6ef0f7326b65433ef42ed9f49a94f87
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
The interface resolution can be different from crtc/layer-mixer WxH
when certain features like destination scaler are enabled. Use the
sde_crtc_get_width/sde_crtc_get_mixer_width functions throughout
to get the correct crtc/lm size based on different features enabled.
This will help in validating/configuring lm & plane correctly.
Change-Id: I45de5844bf7465a3389cf723479c5449a835fb0a
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add support to read and clear the ubwc error status for wirteback.
Log the status during writeback timeout cases to help in debugging.
Change-Id: I11f3827d4a88565b81b21b651971cec55ba06298
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add a writeback connector property EARLY-FENCE-LINE to give usermode
the control on when to trigger the retire fence. This option is useful
in 2-pass composition, where the writeback triggers the retire-fence
early based on the prog-line which allows primary to start the fetch
before wb transaction is fully completed. This helps to keep the clks
and bw low. WB hardware generates the line-ptr-irq when wb output reaches
the configured prog-line. Retire fence is triggered based on the irq by
default and wb-done handles for cases where line-ptr-irq is missed.
Change-Id: I20867979693dc3447f77da24cd7e88305947fb6d
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
From MDSS 9.0, writeback supports a programmable lineptr support, which
generates an interrupt when the configured writeback output height is
reached. Add software support to configure the prog_line and to process
the interrupt.
Change-Id: I3293ad2984c51417e4691c5b11e9c9a010067e1c
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Currently, writeback frame-triggers are serialized by default. Add
logic to support the different frame-trigger modes which can be set
through the connector property or encoder debugfs node.
- default: waits for frame(N-1) completion (wb-done-irq) before
configuring current frame(N) and releases the commit-thread on
frame-start (ctl-start-irq)
- posted-start: no previous frame(N-1) completion wait. Configures
frame(N) and releases the commit-thread on frame-start (ctl-start-irq)
- serialize: no previous frame(N-1) completion wait. Configures frame(N)
and releases the commit-thread on frame(N) completion (wb-done-irq)
(wb-done-irq) before configuring the next frame.
Restrict wb posted-start support only for MDSS 9.x+ targets, with older
targets defaulted to default-mode.
Change-Id: Id441378fd79ecbfcfb820da1ff23b14ccfd8e798
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add ctl-start-irq support which serves as an indication the
HW read the current frame's configuration and software is free
to program the next frame.
Change-Id: I9f6b180cf9e47894ca81d2d4b6ac724827d1368c
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Currently, cwb disable path issues a cleanup flush & waits for the
commit-done. Wait for the tx-done to ensure the transfer is complete.
Change-Id: I509711c157f1d6646646ad96ed140d6bc76d2dba
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Avoid drm vblank on/off for virtual displays to allow drm framework to
ignore the vblank requests. Vblanks are unnecessary for writeback as it
is triggered based on the frame-updates and not on any defined interval.
In addition, avoid vblank callback registration for concurrent writeback
encoder.
Change-Id: I205734e2e3076469dc7f775566cf5e104bac4082
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Remove the hw feature flags that are set by default for writeback as
it does not add any value. As part of the change, remove the unused
wb register offsets.
Change-Id: I04376242e764d8d0a1edb763c9f799d7ae5447ac
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Remove the writeback kickoff_count/frame_count & start/end time
logging. These are redundant counters used for debug purpose. The
pending_retire_fence_cnt and event-logs timestamp can be used for
this purpose. Remove the bypass_irqreg flag as well as its not used.
Change-Id: I1644325afc214f75c76baad615da90c8114836cc
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Expand various SSPP and CTL related data structures
to support DMA 4,5.
Change-Id: I0ce052b6a2f1599a9b6eb82ce8e4f34f4c68333d
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
From Kalama onwards, the VBIF CLK_CTRL register has been moved from TOP block
to individual hardware block memory range.
This change is adding a backward compatible solution to support
per block VBIF CLK_CTRL access by allowing each HW block to register
set of callback ops. Additionally, it adds DMA and IPCC/MSI VBIF CLK_CTRL
block type.
Change-Id: Ia82ced34cfa1636b57cd1c03b327faf923be482a
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
This change enables support for wb1 in ctl path and
adds irq support.
Change-Id: Iebbe35725aa279b8e02217ea93ba1b481f5e869f
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Kernel upgrade has updated list_sort's compare callback's
function signature to take const lists, preventing modification
when performing a comparison.
Change-Id: I71dbe33b9d213357ad9706ffc270053ea569006d
Signed-off-by: Steve Cohen <quic_cohens@quicinc.com>
Add kalama mdss revision and enable features based
on the hardware capability.
Change-Id: I27dff07b00ba16d313c5c8dc2661a10e522daea5
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
The sde_hw_blk was meant to be a generic base object for all
SDE HW blocks, however, it enforces using a common set of ops
which is not practical when blocks have different capabilities.
Since this object was never used as intended and is not doing
anything functional today, remove the dead weight.
Change-Id: If76006c1ae5c62e8d7d77b100837dbaf6c661bd3
Signed-off-by: Steve Cohen <quic_cohens@quicinc.com>
Many upstream files and APIs have been removed in downstream
driver. Some function definintions are left dangling without
any caller. Remove the functions which are not used downstream.
Change-Id: I9f936e7cdac3be6f854b3c67725164fad785f0d4
Signed-off-by: Steve Cohen <quic_cohens@quicinc.com>
Align the HW catalog to use common naming amongst the "revision"
and "version" structure members.
Change-Id: Ib6c81aee6cb49208b0699db4a75b4eb9dc79e800
Signed-off-by: Steve Cohen <quic_cohens@quicinc.com>
Move all the individual boolean flags from HW catalog into a
"features" bitmap. These flags are used to specify support of
various target specific features.
Change-Id: I2334b3b873f3737f91bbae4ef576408247710156
Signed-off-by: Steve Cohen <quic_cohens@quicinc.com>
Add const qualifier for the device_node param in get_named_gpio
function pointer hook to adapt msm-5.15 kernel.
Change-Id: I0129efeff5aeb85b567bf6f2b5d2e45312fab024
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
