wmi_host_pdev_nfcal_power_all_channels_event is updated to have
number of freq, nfdbr/nfdbm.
It is assumed that number of nfdbr & nfdbm are the same.
Change-Id: I23279bde55ee42744c50b23e199b04fbc070a87f
The state machine infra require the states in sequence and addition
of if define in the wlan_sm_state_info will lead to state machine
init failure.
Fix this by removing the if define from the wlan_sm_state_info and
adding the dummy func for not define cases.
Change-Id: I5c5cb7837774954183a8ea1683c401441fb48bab
CRs-Fixed: 2764953
Add an API wlan_reg_get_max_txpower_for_6g_tpe, to get the max tx-power
in PSD or EIRP format, based on the client type as follows:
=======|===============================================
| S No. | Default Client | Subordinate Client|
|=======|===============================================|
| EIRP | reg_get_channel_reg_power | 24 dBm |
| | _for_freq(pdev, freq) | |
|-------------------------------------------------------|
| PSD | (-1) dBm | 5 dBm |
=======================================================
Change-Id: Ic4946cd3e3f2e13469b0d5e2020e3fcda5040c2f
CRs-Fixed: 2765566
For hif_bus_resume till now driver does panic whenever there is
failure. This is now handled in the cnss driver which will collect
the required dump to debug the link down.
Remove the bug_on, just log and return the status.
Change-Id: Ief4d86dd76c0bbde361b69b38894a944eec05aae
CRs-Fixed: 2765117
Currently, list empty checks for scan_req_q is done outside the lock.
This is causing synchronization issue during scan and SSR/vdev delete
in parallel.
To avoid this, check for scan_req_q empty inside the lock.
This change also updates the return type of
wlan_schedule_scan_start_request to QDF_STATUS, which is expected by
caller API.
Change-Id: I8b6febdd98af7856fb047b1c9d852e4944a137b5
CRs-Fixed: 2763173
The max txpower allowed in reg domain FCC15 (24dBm) and FCC16 (30 dBm)
as per the regulatory update #32 xls is applicable for 320 mhz. For
160 MHz,the powers need to be reduced by 3dbm.
This was missed in the change-id
I1b1bdaceb4fa48973fb33fca17465a25d05ae040, and the power values
applicable for 320MHz were added.
Therefore, modify the max txpower allowed in regdomain FCC15 as 21 dBm
and the max txpower allowed in regdomain FCC16 as 27 dBm.
Change-Id: I5f5fa4ce1ba17deedfd367d7d07ad6c27fe91aa0
CRs-Fixed: 2763480
In the scenario where htt packets fail to be transmitted to
FW, they are added in both endpoint tx queue and misc list.
On receiving FW down indication before these packets are sent
to FW, endpoint tx queue is flushed and nbufs are freed. Post
this, the aforementioned nbufs would be unmapped/freed again in
htt_htc_misc_pkt_pool_free causing panic.
Fix is to free the nbuf via misc pool free only when the magic
pattern is set.
Change-Id: Ie523a7ca0054eb4104a107b3bddd50cb9b585275
CRs-Fixed: 2762829
Debugfs support for HTT stats under compile
time flag "HTT_STATS_DEBUGFS_SUPPORT".
Change-Id: I44c4f11265fdb3b9d53a9ac545e2945854bb9a57
CRs-Fixed: 2760947
Add support to configure the number of chains over the nl
vendor command
QCA_WLAN_VENDOR_ATTR_CONFIG_NUM_TX_CHAINS
QCA_WLAN_VENDOR_ATTR_CONFIG_NUM_RX_CHAINS.
Change-Id: I81eeda348efe36e03620687e81c082d3869fcd35
CRs-Fixed: 2756676
Add logic to pre-allocate DP consistent memory and reuse later
on wifi on/off. This prevents memory fragmentation.
Change-Id: I1e5eb0da39950a5d028dd46d38ff715f283e53ff
CRs-Fixed: 2740889
WLAN_CRYPTO_RSN_CAP_OCV_SUPPORTED i.e. 0x4000 bit in RSN capability
is set to 1 to indicate that the STA supports operating channel
validation by including Operating Channel Information (OCI) in RSNA
exchanges and validates the information when received from another
STA that indicated this capability.
Change-Id: I8cbe640772c95573461ef2ef54c9e86778fe970f
CRs-Fixed: 2765802
Update formate and index to traverse CE Latency stats circular buffer
and print them in more user readable format.
CRs-Fixed: 2676241
Change-Id: I7b3464cd00227dfcf98bbfa63a407055dd7cbf57
IRQ affinity for CE IRQs has been set to gold cores.
But affinity hint is not removed when freeing CE irqs.
Therefore remove affinity hint for CE irqs before freeing
them.
Change-Id: I7385a90955bc7e357badcd784e40d89022542d1a
CRs-Fixed: 2765373
In IRQ storm scenario, the events are logged to hif
event desc history even though the SRNG is empty
resulting in overwriting of older entries useful for
debugging.
Fix is to avoid recording hif events if the SRNG is
empty in IRQ storm scenario.
Change-Id: Id4161198c60f5fae31123c936f0f4acc1082a78b
CRs-Fixed: 2753675
Support WHUNT FW simulation feature.
Records all the WMI events and commands, for all PDEVs.
Set WMI_EXT_DBG flag to enable this.
Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
CRs-Fixed: 2762266
Use ktime_get_ts64 instead of ktime_get_real_ts64 to display logging time
stamp. ktime_get_real_ts64 displays the time of day in a timespec64.
Whereas, ktime_get_ts64 gets the monotonic clock in timespec64 format.
Change-Id: Id6646a2d60c5d049b0d777f58c9ac332ffb52437
CRs-Fixed: 2764048
Currently the rx tid spinlock is destroyed from
peer delete (based on peer state) or peer unmap handler.
This can lead to a race condition when the peer is
deleted before the peer map command is processed/received.
Fix the above race condition by destroying the rx tid
spinlock only when the peer handle is destroyed/freed.
Change-Id: Iaf7ccea11a95732c1aa20e66af6dd4a9a66517c5
CRs-Fixed: 2763533
Whenever there is a scm_update_rnr_info() function call,
print is flooded in each scan.
It is not giving any additional information.
Remove the print "scm_debug("Failed to get meta, freq %d", freq)"
Change-Id: Id6adda855e1d181704d8c69c10e4d041af758e43
CRs-Fixed: 2761408
In Tx data path get the peer reference and use
until there is a peer_id mismatch. This is to avoid
per packet atomic operations
Change-Id: I59cdbef19001c694654f0967381a9242788d9cbc
For kernel and driver logs, replace %pM and QDF_MAC_ADDR_STR/ARRAY
with QDF_MAC_ADDR_FMT.
For tx/rx mask, use QDF_FULL_MAC_FMT.
CRs-Fixed: 2763028
Change-Id: I6c56c2040967b279dd31100c4f376f2452146742
The idea behind introducing these macros is, if the feature
CONFIG_WLAN_TRACE_HIDE_MAC_ADDRESS is enabled, then the
requirement is to hide 2nd, 3rd and 4th octet of the
MAC address in the kernel logs and driver logs.
But other management interfaces like ioctl, debugfs, sysfs,
wext, unit test code or non-production simulator sw (iot_sim)
should continue to log the full mac address.
If the developer directly introduces %pM in the code, it becomes
difficult to catch this in the code review and may end up breaking
the feature CONFIG_WLAN_TRACE_HIDE_MAC_ADDRESS if enabled.
Hence the plan is to introduce meaningful macros to help code
audit easy and with the help of automation, block the developer
from directly introducing %pM in the code.
Change-Id: Id28663eb6e750febba07ed9bdad168187df3248f
CRs-Fixed: 2763028
As part of the VoW IGMP improvements, which deals with
conversion of igmp packets to unicast packets, the
following changes are done when the new feature is enabled:
1. IGMP/MLD packets with special addresses (addresses not
part of any multicast group) will be converted to all
existing clients of the AP. These packets will be
directly fed to igmp multicast to unicast conversion
module.
2. The IGMP/MLD packets with group specific addresses will
first go to multicast enhancement module, where they
will be allowed to pass and will be converted to unicast.
3. The new feature will be enabled only when multicast
enhancement feature is enabled, which will be ensured
at the configuration level.
FR : 61063
Change-Id: I2fd5a67766c806432fbe1a12cb9654a3600100f5
In roam HO failure, peer unmap indication is processed
even before Host initiates the peer cleanup. In the cleanup,
as part of cdp_peer_teardown, AST entries are freed up without
removing it from the peer AST list since get_peer_by_ref_id
returns NULL peer pointer as peer is moved to inactive state.
Fix is to delete peer AST entries as part of peer unmap
indication so that the entries are removed from the AST list.
Change-Id: I1b04517e8cc392b33bb439501e61e3d5534d8307
CRs-Fixed: 2763825
Firmware expects the channel property WMI_CHAN_FLAG_NAN_DISABLED
to be set if NAN is not allowed on any channel. Firmware shall
check the flag and decides whether to enable NAN/NDP on that
channel.
Change-Id: I8e283d2cd0f83a43e04dad142b09d519ef7f0db3
CRs-Fixed: 2760348
Currently the driver enables the SRD channels
support for both P2P_GO and SAP if the SRD master
mode is enabled.
Have individual ini values to enable/disable
the SRD channel for each op-mode as required.
The ini etsi13_srd_chan_in_master_mode has the
following config for individual master modes:-
Bit map for enabling the SRD mode in various modes are as follows:-
BIT 0:- Enable/Disable SRD channels for SAP.
BIT 1:- Enable/Disable SRD channels for P2P-GO.
BIT 2:- Enable/Disable SRD channels for NAN.
Change-Id: Ia9ca9d49102405b307a410cbf28e3f8896114cac
CRs-Fixed: 2760002
Add support to update the count of number of Punctured Preamble
PPDU's transmitted by the AP.
Change-Id: Id85a490e9e80566e639f48190a96d3107c6e5c61
CRs-fixed: 2755288
Add new vendor command QCA_NL80211_VENDOR_SUBCMD_WIFI_FW_STATS
which is used for wifistats. Also remove
QCA_NL80211_VENDOR_SUBCMD_HTT_STATS which is wrongly used
in place of QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING
Change-Id: Ia73a09419c22c1206f8f933b9cf4b7f22b0399fd
This will help to configure desired rate mask. It can be
used to optimize link performance.
Change-Id: I15b6fbc512d9b0869a6ad6a6f24f1593abf14dae
CRs-Fixed: 2758871
This change allow Tx VDEV of MBSS mode to configured
dynamically by reset the VDEVs.
This change includes FW service bit parsing, checking
VDEV state of all VDEVs, sending MBSS information in
VDEV start command
Change-Id: I46b13629bd1c07be86b408d72c2967642ce8542e
CRs-Fixed: 2759229
