FW sends ppdu_id for every TLV in Tx HTT PPDU completion path.
This ppdu_id has 8 MSB bits filled with FW metadata which is different
for every TLV. Host uses this ppdu_id for list maintenance.
Presence of the FW metadata results in ppdu_id mismatch for different
TLVs even when they belong to the same PPDU.
Consider only LSB 24 bits for ppdu_id on host side.
Change-Id: Ic6ec780fe97f0597fcd841b33ac0dce33ad986c9
CRs-Fixed: 3445603
HAL changes to populate agc gain, CFO, rx_start_ts, mcs_rate and
gi_type to CFR info.
Change-Id: I20b4ce1b8c065349106cd999054ff08c7f3521ec
CRs-Fixed: 3453631
CUrrently if IPA offload is enabled in SAP mode
the default Rx routing is to IPA serviced REO rings.
With this change the default raouting is set to
WLAN HOST serviced REO rings.
Change-Id: Ibf9dead063c9d9fbc6b1fd502342ea13456b2473
CRs-Fixed: 3421879
mlo setup soc down indication can be called from soc_stop and detach
path. Add logic to handle multiple calls by ignoring down if the state
is already cleaned up.
Change-Id: I6f5c11cc30f38423661063d2834a5b4efa088a49
CRs-Fixed: 3450300
Mutex cannot be acquired or released from
interrupt context.
To fix the warning in log, do not acquire
or release log in while stopping t2lm timer
Change-Id: Ie1e885b162a22e327d3260fecbd71153b947e11b
CRs-Fixed: 3444779
Add new roam failure reason code for no ap found and final
beacon miss sent and reason code for no candidate found
and final beacon miss sent
Change-Id: I4c4813efdedd30bd65c7baf0110c292c5ae3573c
CRs-Fixed: 3437119
Currently if IPA UC is not loaded when opt wifi dp
is enabled, the return status is not handled correctly.
This causes the qdf_event_create to happen for ipa ctx
which later triggers an assert during ipa cleanup.
This fix will handle this scenario.
Change-Id: Ie0a38bd6745f54a37be422e1d352f6c2a7960bbc
CRs-Fixed: 3444783
During initial AFC development it was assumed that AFC object would travel
till an application endpoint outside the driver, presumably till an
application of a different machine anything in the internet and therefore,
a packed and well formatted structure was propped for the AFC object.
However, when the AFC object leaves the driver, it is converted to an
object that has NL80211 TLVs to represent it. Therefore, the packed
AFC-request object is no longer a necessity. Moreover, since an unpacked
structure (or structures) is speed/time optimized, modify the packed
structures into unpacked structures.
Change-Id: I08db1911a355b6eebffa0e13def547c98ddf38d3
CRs-Fixed: 3431997
Send the driver disconnect internal reason code as an event to user space
using QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON vendor command.
Change-Id: I0027675b809b94628b6c0c4b8e8286e38fa9f47d
CRs-Fixed: 3371398
Move fail_cnt and abort_count to soc->stats
struct, so that we can retrieve stats
during a crash. Also fix few other errors
found during initial tests.
Change-Id: Ieaee10b2dd2b5e589c21aa50c83dcf352623275d
CRs-Fixed: 3428501
Currently IPA autonomy is disabled for opt wifi dp
feature inorder to set default packet routing
to HOST REO rings instead of IPA. The check currently
depends on the feature flag set from IPA.
But this does not handle the case if feature is
enabled from WLAN but disabled from IPA, as autonomy
will get enabled in this scenario and default packet
routing is set to IPA.
This fix will check if opt_wifi_dp feature is
enabled from WLAN and disable autonomy to
ensure the default routing is always set to
HOST REO rings.
Change-Id: I3673d7dbeefcadb45132ea300f4ec3ac22743b86
CRs-Fixed: 3450862
Buffer was freed before processing the TLVs
(while flushing) leading to use after free access.
CRs-Fixed: 3425044
Change-Id: Ida3bcf9add95041c43b2b1e8e3450853bd0ed88c
In case of a split-phy 6 GHz radio, there are 6 GHz opclasses and cfis
that do not intersect with the chip range for a given pdev.
The current algorithm appends such opclasses with "num_cfis as 0" to
the AFC request buffer and the buffer with empty cfis are
sent to the AFC server.
This change ensures that the chip unsupported opclasses/cfis are not sent
to the AFC server.
Also, if the reg rule frequency range is not supported by the chip range,
reg_intersect_ranges() is expected to set the out_range as
{low_freq = 0,high_freq = 0}. However, it only sets the low_freq to 0.
Since high_freq is a non-zero value, the chip un-supported range is
considered as a valid range with frequency_low as 0.
This causes the following error from the AFC server:
"error": "The frequency range indicated in the Available Spectrum
Inquiry Request is at least partially outside of the frequency band
under the management of the AFC System (e.g. 5.925-6.425 GHz and
6.525-6.875 GHz bands in US).
To fix this issue, assign high_freq also to 0 if the
reg rule frequency range is not supported by the chip range.
CRs-Fixed: 3442719
Change-Id: I5504376ac31203045b32e23f54a9ab6a41e63a3f
IPA_OFFLOAD will be enabled by default for MSM.
This is a WAR to disable IPA offload during compile
time, based on the IPA_WDI_OPT_DPATH feature flag from IPA.
If the flag is not defined in the IPA test
module file, IPA offload path will be disabled.
This is a WAR, and will be fixed once a Kernel config is
available to enable or disable the optional wifi datapath
feature.
Change-Id: I7aad275f4d86a2ffc239f1fe343de31ec2988fad
CRs-Fixed: 3431972
IPA_OFFLOAD path will be enabled by default for MSM,
inorder to support optional wifi datapath feature.
This change is a WAR to disable IPA offload during
compile time, if the feature is not enabled.
This is done using the IPA_WDI_OPT_DPATH feature flag
from IPA. If the flag is not defined in the IPA test
module file, IPA offload path and optional wifi dp
feature will be disabled.
This is a WAR, and will be fixed once a Kernel config is
available from IPA to enable or disable the optional
wifi datapath feature.
Change-Id: Ic1b961656f52fa009ab4c3b3d8d3cac305c2c7c4
CRs-Fixed: 3431972
If the ingress net device is NULL, return gracefully
from the API to check if the skb is from rmnet
Change-Id: I81b8cea7f311fe581e83f2310155b83b28f2fd32
CRs-Fixed: 3445050
New TLVs for MLO link state information is introduced for
get link info command. Add WMI changes to add these TLV in
get link info command
Change-Id: Ib8d12a727ac6f59257dcce69174271330a065c77
CRs-Fixed: 3431076
Add a new vendor command and attributes to control and fetch the state
information of the MLO links affiliated with a specific interface.
This will enable user space to dynamically control the MLO links states
based on the latency, throughput and power save requirements.
Change-Id: I1ef710a6f3a1f8723bb3d1c564c0c803bfa0b587
CRs-Fixed: 3416250
Fix the function name dp_ipa_opt_wifi_dp_cleanup()
for IPA_OPT_WIFI_DP not defined case.
Change-Id: Ie8d7db76add281025fd654d8a3e0017eddd6fbc4
CRs-Fixed: 3446301
Inorder to keep the PCIe link up during
optional wifi dp transfer the
hif_force_wake_request() is called during
filter addition. This increments the rtpm_get counter.
Now if Wifi is disconnected before releasing the
filters, the corresponding hif_force_wake_release()
call is not made. This causes a mismatch in RTPM GET and
PUT calls and triggers an assert during hdd_wlan_stop_modules().
This change adds a cleanup call to release the force wake
and reduce the rtpm_put counter to prevent the assert.
Change-Id: Idd778275a015922376cf7eb0a7c3d92e75881fe8
CRs-Fixed: 3441186
ppe2tcl and Umac reset interrupts need dedicated irq lines.
Hence, group some of the existing dp groups togeather
to share MSI lines to make space for ppe2tcl and Umac reset
dedicated irqs.
Change-Id: I5181caeaeb4d0107b62e7ac812c2f829fd8215a2
CRs-Fixed: 3423553
Trigger panic if it takes too long in completing
the tasks. And also modify the maximum retry count
if PANIC_ON_BUG is enabled to avoid false alarms.
It makes debug easier for tasklet stuck and schedule
latency related issues.
Change-Id: I521661c656d227ffb3f4c87ecd56bbfa938c9c25
CRs-Fixed: 3441248
MC/BC frames are routed to FW ring based on routing config for MC/BC
data as SRC: FW2RXDMA and DST: RXDMA2DFW.
Data offload features in FW will take care of routing the MC/BC frames
to FW in both active and low power modes.
Change-Id: I09395978f890d9a23564bef4f974971f6de175df
CRs-Fixed: 3427204
Reduce log level to debug from error to avoid console flooding
when low mem condition is hit.
Change-Id: I0341beed9059c4db2eba2cc481a797d67dd35b25
CRs-Fixed: 3442503
Consider 4 address repeaters also for vdev stats when operating in
WDS Extended mode.
Change-Id: I91d9bbeb2b917154da730b22b46645e76fa55c6f
CRs-Fixed: 3437803
Some devices in WDS station mode have limitation when connected
in 3 LINK MLD association where the Primary umac selected and assoc
link should be same. Make sure to have a sanity check before
going for association in such cases.
If the primary umac and assoc links are set to be different then
the connection will be rejected.
Change-Id: If56461a140d4685ba279b1babe04709d919d1650
CRs-Fixed: 3443733
Add support to send RX stats when Direct switch is
enabled. For WDS extended mode get the stats from
peer object, else take it from vdev object. These will
be accumulated by PPEDS module
Change-Id: I1f73c50679c416536cfc1ebaaeaec9b307e8bf56
CRs-Fixed: 3421251
Get peer_id from peer structure to a local variable and pass to hal api
in order to avoid race condition between peer delete and peer unmap.
Change-Id: Ib6a89f1defcfc8f66c1146a330a373a760520aa7
CRs-Fixed: 3444998
Do not send assoc response from wlan_mlo_peer_create for
multilink MLO connection. This makes sure that assoc resp
is invoked only once.
Change-Id: Id1acf20bd5e3e3beb16e0dc3073676c421825ae6
CRs-Fixed: 3443511
Current code doesn't have hif_ce_desc_history in ssr driver dump.
Fix this by adding the two data structs: hif_ce_desc_history_buff
and hif_ce_desc_history to the ssr driver dump regions.
Change-Id: I9256d94db6c3c3a3588e5729b9181efabdaf18ea
CRs-Fixed: 3443230
Currently if IPA wants to add 2 filters and
send the filter params in 2 separate add
requests, HOST does not handle this correctly.
This causes the second filter params to be 0.
This change updates the correct index to be accessed.
Change-Id: Ib0a4853d46585d9529e990177fb8da20382c2fdb
CRs-Fixed: 3441196
Driver extracts the vdev from peer, self mac address and
vdev_id. But in some APIs, there can be below scenarios
For example:
1. peer is not available for that vdev( roam vdev),
2. API does not have vdev_id,
3. mac address is not known or incorrect,
4. there is no session available.
While roaming, there can be scenario where driver need to
fetch the vdev before peer creation and session is not
available.
For this, driver introduces new API to fetch roam vdev from
pdev object.
Change-Id: I4a2521773b893a8dc0553335bcadac5a84fbc300
CRs-Fixed: 3441493
done the following changes to improve the RX path KPI
1. remove the extra invalidate in RX path as
we no longer dirty the RX TLV cache lines.
we now store the rx error codes in nbuf cb instead
of RX TLVs reserved memory bytes.
2. with features like flow tag and wds extended mode
enabled by default, the rx_fast_flag is always set
to false, this resulted in lot more instructions
being executed in RX path.
Now we ensured this flag is at least set for other
features which are not enabled by default.
Change-Id: I04c6bdc52a2b3f1248b822a108d8bd1a70abcc7c
CRs-Fixed: 3406505
Once an incoming MGMT frame is inserted in the MGMT Rx REO egress list from
wlan_mgmt_rx_reo_algo_entry(), there is always a possibility that the same
frame could be sent to upper layers from the other CPUs before
wlan_mgmt_rx_reo_algo_entry() completes its execution in the original
MGMT Rx path. This means that nbuf and MGMT Rx params of a given frame
could be freed before wlan_mgmt_rx_reo_algo_entry() completes.
Hence, make sure to not access frame's nbuf and MGMT Rx params once the
list updates are done for that frame.
Change-Id: I91cbdef4b1ea5b81d39606e47a46021f30193ce5
CRs-Fixed: 3433621
As of now, RX PPDU START USER INFO TLV is not subscribed as
part of pktlog. Since enable_ol_stats is set by default and
it subscribes RX PPDU START USER INFO TLV, we can see
RX PPDU START USER INFO TLV being available as part of pktlog
data. But recently, with all the automation testing scripts
it is decided to set enable_ol_stats to 0, hence subscription
of RX PPDU START USER INFO TLV is taken care during the filter
set up for all the pktlog modes.
Change-Id: Ib8c7e668a17fcb8e791784d29ef6f00fbdd2df34
CRs-Fixed: 3440721
