Add PBR, CPS port types and port parameters for WSA
Update RX and TX port types to include full list of ports
Change-Id: I5b69ee777addebcf4167dccd4ce4ab0af31b754d
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update swr_tx slave port config to use slave provided port params
and remove slave port static tables.
Change-Id: Icfedf1229a88432e80c2294e13f2ccc3949417c5
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Update MSB of sample interval in the frame shape
to avoid misconfiguration.
Change-Id: I05e99bc563f6cdc71c7caf424441c4caa44ec4c6
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add support to disable dynamic port map via device tree
property.
Do not update master clock when dynamic port map
is disabled for a sound wire master.
Change-Id: I9f9344866faa4d1c342787e014102d9182ed56ae
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Some usecases need soundwire bus clock frequency to run at
lower clock rate for better power and performance. Update
soundwire bus clock frequency based on usecase.
Change-Id: I2e786d9f5d5d2ec3841daa934802eeafa79a8f6c
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update regmap support for soundwire interface. This change
adds init function to initialize soundwire register map.
Change-Id: I9a6eee5c0ca507cafdf6416a4adea4e60b714eba
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
for 32bit arch based builds, soundwire logical address
fails when compare with dtsi value (64bit). Update addr
type of soundwire slave addr to u64.
Change-Id: Ifda388ca66350a2bc898484cddecbbcab4d3ece4
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add soundwire API to wakeup soundwire master and slave devices.
These APIs will be used by slave driver to vote and unvote for
master wakeup, when it requires master for register access
operations. Master will be aware of the slave usage with the
vote for device wakeup.
Change-Id: Ifa93f35ab2cffba778cd2fd9a2461e5a58445b75
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Switch audio drivers to SPDX identifier on msm-4.19.
Change-Id: Ic3f0230a516db251b8d81e8a7e73dbc04d66fe1b
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Soundwire slave interrupt is only edge type, so any pending slave
side interrupts could not cause a new slave interrupt, if
they are triggered before clearing of existing interrupts.
Recursively trigger slave irq until there are no pending slave
interrupts to handle this issue.
Change-Id: I254f2467f09172490796114b48f1f0feb604ad17
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add wcd937x swr slave and codec driver.
This adds only basic support for codec registration.
Change-Id: I87519a234f14d34a019c8f66652b7224759e639c
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Interrupts will be handled by slave driver. This
needs slave pointer to store virtual interrupt and
pass it as a parameter to handle_nested_irq.
Change-Id: I356102a04b4fda7e5863f809cd848d7a82b82f36
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
soundwire bus driver changes to support new soundwire
master driver for Talos/vipertooth.
Change-Id: I70e52a72edd80abc72ccb99b29b1a642debec257
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
