At present, duplicated thermal level change events are reported
on different mac with different pdev id from target. To report
the lowest pdev id's thermal level to avoid confusing the user.
Change-Id: Ia1f497ba1a1e0af946b87924de80b9fd39fe95e8
CRs-Fixed: 2976437
Currently, rssi of rx data packet is not received as part of rx_tlv_hdr.
To mitigate this limitation, fill the average rx rssi received from
firmware in wmi smart monitor event which is stored in pkt_capture's
vdev_priv structure.
Change-Id: I3a1b7b766979816d6b17f05edc1c25d503edec1d
CRs-Fixed: 2958109
Add function to populate the rx average rssi received from target in
pkt_capture vdev_priv structure. The rx average rssi is received in
wmi smart monitor event.
Change-Id: I9206669b418a2245bb8d53920040fddea77ce06c
CRs-Fixed: 2969242
Currently ini based tx aggr support disabled due to firmware
incompatibility.
This change is to enable ini based tx aggr support based
on firmware capability.
Change-Id: Id5d7197f18fafd926de889f9b69ca2be90497fd2
CRs-Fixed: 2859709
This reverts commit I9e49ad5218f913f116cf4472f768f572740f14df
since ini based tx aggregation is configured based on firmware
capability.
Change-Id: I54541cd282eda6606e75fa347989624a0e0fef01
CRs-Fixed: 2963280
Register handler for wmi smart monitor event in packet capture
mode in lithium. Currently, wmi smart monitor event provides
average rssi of last ten received data packets.
Change-Id: Ieeea5cbef328b04f139f54e7a42d52a3cf25824b
CRs-Fixed: 2969245
Reorder error checks in ipa_uc_ol_deinit, so it can
return immediately if IPA config is not enabled.
Change-Id: Ibf9f30650ce201eea562baf07b6dd9b83fd8dfff
CRs-Fixed: 2977474
Currently, if it's 11r connection, zero out reassoc_ft_ie in
cm_preauth_success(), it will cause FT roaming failed due to
ft ie loss with reassoc request frame.
Fix is to only zero out reassoc_ft_ie when connection is 11r
and open mode.
Change-Id: I8c1d6ca743b528c4ab0211723a792b14abe5acab
CRs-Fixed: 2976385
Fix LFR2 roaming related memory leak issues in function
lim_send_reassoc_req_with_ft_ies_mgmt_frame() and
wlan_cm_host_roam_start().
Change-Id: I83271b57d0651d680324b67f0e6e6a3694c9ab8c
CRs-Fixed: 2976469
Add debug log to print more details about the link vote id when
PCIe link suspend is not allowed.
Change-Id: I5069202436e0da37b8ae22f84e28ac06d35002b5
CRs-Fixed: 2964957
Return success when firmware doesn't support 11k offload, or else
subsequent roaming related wmi commands have no chance to issue.
Change-Id: I69d55cca63f2b7ab4787295a2825159395cf2a11
CRs-Fixed: 2976163
With commit I84c77644c6023322ac77e307b06be70ec0f58ed5, Host
allows dual sta roaming only if two STA's sessions for are
active (STA + STA) and concurrency is in DBS.
Currently, before the increment of the number of active
sessions in the policy manager, the host tries to enable
dual-band roaming. This results in dual sta roaming failure
with the reason number of active sessions equal to one.
The fix is to make sure the host should try to enable dual-band
roaming after incrementing the number of active sessions in the
policy manager.
Change-Id: I150926897cb773db979279edc54e5fb731d98e43
CRs-Fixed: 2971831
Provide ucfg api to configure qos null and trigger frames.
Ucfg api will send configuration to FW. Below configuration values
are allowed.
PACKET_CAPTURE_CONFIG_TRIGGER_QOS_DISABLE: disable capture for
trigger and qos frames.
PACKET_CAPTURE_CONFIG_TRIGGER_ENABLE: enable capture for trigger
frames only.
PACKET_CAPTURE_CONFIG_QOS_ENABLE: enable capture for qos frames only.
PACKET_CAPTURE_CONFIG_TRIGGER_QOS_ENABLE: enable capture for both
trigger and qos frames.
The packet capture config old value will be over written by new value.
For example, first if we configure value as
PACKET_CAPTURE_CONFIG_TRIGGER_ENABLE and then if we send config as
PACKET_CAPTURE_CONFIG_QOS_ENABLE then config is enabled only for qos.
Change-Id: I02dcd4372c7194ec3e477694ad0e2c045fe6c942
CRs-Fixed: 2967824
Do not drop qos null frames in packet capture. so remove
check for qos null frames in packet capture mode.
Change-Id: Ie3a700cbc5a7e582ea7cfc39ebd62880265f8f7d
CRs-Fixed: 2973279
Add INI configuration support to enable/disable BSS color collision
detection offload in STA mode.
Change-Id: I9d8f096813d74242566ccae5f92e872bcaca6295
CRs-Fixed: 2965133
Reduce the timeout to wait for TDLS mgmt to
complete from 11 seconds to 3 seconds.
Also, Allow Tx data frame if no ack/nack is
received even after 2 seconds for last data
frame.
If last data frame is sent and no ack/nack
is received within 2 seconds, then drop the
new data frame.
Change-Id: If3294908cb1399c3b4c8931b80663671400bf610
CRs-Fixed: 2966308
Enable the wlan IPA events for P2P GO/CLI mode for qca6390 to avoid RX
packets get dropped due to IPA interface context is not created.
Change-Id: I1e2c5e4085874280779d8d8d07efdb1f33e6d90b
CRs-Fixed: 2853271
In case of STA + SAP concurrency and STA is on indoor channel.
Dont allow SAP to turn on, irrespective of DBS, MCC or SCC mode
of concurrency, if STA + SAP concurrency not allowed
on indoor channel.
Change-Id: I79582f88e81cb2c95d2da2480d1e3d7a8b86906f
CRs-Fixed: 2967952
Validate fw capability to handle big data command before sending
big data stats request to fw.
Change-Id: Id7df4c3ac36e25761938758472ea9281c174a8c9
CRs-Fixed: 2937523
EAPOL handshake is done by wpa_supplicant in initial connection
and WPA3 roaming as well. Driver is supposed to wait for EAPOL
handshake/key complete timeout after getting roam sync indication
from firmware. But this wait is skipped with the change
change-id : Ie4f06cfcb066ae245de024b62da586aade783aec.
Add the same check again.
Change-Id: I437c6be15d7c1a3775a177c2da6c581d417c2533
CRs-Fixed: 2963548
Refactor csr_roam_pmkid_req_callback to use
mlme_cm_osif_pmksa_candidate_notify and move other
unused API under CM flag.
Change-Id: I835d54804f733eddff48de38e4c545a87f34bb30
CRs-Fixed: 2965602
Firmware sends NAN log events to driver and these are logged
with info level to capture complete NAN state machine logs in kmsg.
Currently, these events are received/processed in soft IRQ context
and causes performance issues as logs introduce delays. Move the
event registration to RX_WORK context to avoid delays.
Change-Id: I15ba20059f55f002cfe276d62e68e3cc09136a23
CRs-Fixed: 2960359
For dual sta case, if vdev0 disconnected before vdev2 disconnected, vdev0
PCL cmd retained vdev level, after vdev0 reconnected first, just allowed
intra band in PCL, only can roam in intra band.
Fix: When vdev disconnect, reset it's PCL cmd to pdev level.
Change-Id: I3ed3ec398cfe1a17d07ce716c27026b9660305bd
CRs-Fixed: 2960194
Set PCL command should be sent to firmware only for STA mode.
For P2P vdev, except the connected band, the other band channels
are marked disallowed. With this, if the set PCL command is sent
then STA can't roam to the disallowed channels.
Hence don't send PCL command if the vdev opmode is not Station.
Change-Id: I6c4917f75d5f14169e2c564d5f6deee819fb629a
CRs-Fixed: 2939148
As part of regulatory cleanup, wlan_chan_to_freq() is removed.
Use wlan_reg_legacy_chan_to_freq()/wlan_reg_chan_band_to_freq()
instead of wlan_chan_to_freq().
Change-Id: I9d105863f8d6384c97e8219b89a230c863e29d19
CRs-Fixed: 2933440
The WTC parameters are stored in MLME vdev private object.
So the parameters are cleared once vdev delete is done.
Move the WTC parameters to psoc->mlme_cfg to retain the
values across disconnections.
Change-Id: Icecfbef19af994f8a05622501d435bfb63beca50
CRs-Fixed: 2959715
Existing INI disable_4way_hs_offload is defined as a boolean
that controls the EAPOL Handshake to be offloaded to Firmware or
Not. There is no way to specify the EAPOL offload per AKM.
Hence extended the support of EAPOL handshake offload to firmware
per AKM by converting this INI to a bitmap integer.
With ini value as 0 by default Firmware takes care of 4-way HS
during roam for all AKMs except for SAE and OWE. If
this ini value is 1 then Host takes care of EAPOL for all AKMs.
Having the backward compatibility, added a new value to ini.
If this ini value is set to 2 and also if the SAE EAPOL offload
service bit is set by Firmware then the behavior is same as ini
with 0 except that Firmware takes care of 4-way HS for SAE roam
as well. And for OWE it is still handled by supplicant.
To achieve this, new roam offload flag is introduced to indicate
Firmware about SAE roam EAPOL offload, So that in Roam sync
indication Firmware will inform the status as connected but not
authenticated so that supplicant can take care of 4-way EAPOL HS.
Change-Id: I8b65a1768fad91fac7e427712d3ccf4586176f5f
CRs-Fixed: 2955029
Change direct RX TLV usage to using HAL APIs to populate RX packet
capture params.
CRs-Fixed: 2888534
Change-Id: Ib20e72ddb214e2579d2eabb92630604dc5b88526
Add the changes in FISA/pkt-capture APIs due to the
modifications in the hal APIs to get rx tlv params.
Change-Id: I5b1827079ca2e056da0db5e396ca90aec57f559b
CRs-Fixed: 2888534
TWT is supported in STA/SAP vdevs and it's allowed only in
DBS/Standalone case and not in SCC/MCC. Disable SAP TWT if
1. Concurrency occurs in SAP + NAN/NDI vdev
2. SCC/MCC occurs after CSA
Change-Id: Id1400bd5555d2f48590d7d3ad7c70162d1dd92fb
CRs-Fixed: 2942959
TWT is allowed only in DBS/Standalone case and not in SCC/MCC.
Handle TWT if any session request comes in SCC/MCC or DBS case
as per below:
1. If TWT session request comes on standalone SAP then peer
client will initiate the session and not from userspace
(SAP DUT)
a. Send twt responder enable command and
b. Send twt requestor disable command to firmware
2. If session request comes on standalone STA then
a. Send twt requestor enable command and
b. Send twt responder disable command to firmware
3. If two vdevs are up and SCC/MCC exist
a. Send beacon template with twt responder disable command to
SAP vdev
b. Send twt requestor disable command to STA vdev
4. If two vdevs are up in case of DBS
a. Send requestor enable command for STA vdev
b. Send beacon template with responder enable command for SAP
vdev
5. If 3 port concurrency comes then
a. Send requestor disable command to STA vdev and
b. Send beacon template with responder disable command to SAP
vdev
Change-Id: I65994702bb72d5006bd66b2ef57a0704a67410f7
CRs-Fixed: 2938961
Fix some LFR2.0 issues for connection manager path as below:
1: Add ptr null pointer and len check before access
rsp->connect_ies.bcn_probe_rsp.
2: Remove aged AP threshold check so that roam process can find
candidate AP with more probability.
3: Set cm_ctx->vdev to cmd_info.vdev in
cm_remove_preauth_cmd_from_serialization().
4: Add more debug logs for preauth part.
Change-Id: I4b0766bba40e3ebc3d01bdd4ae59aec1ec3a21d9
CRs-Fixed: 2961151
Remove duplicate code in connection manager and call
same API from connect complete and roam complete.
Change-Id: If7e9e1069acb1dede9433d16ef96f37029ff716d
CRs-Fixed: 2960921
Send TDLS STA notify only when connect is success.
This is required as incase connection, it will increment
tdls_soc_obj->set_state_info.set_state_cnt.
It that connection results in failure, then also, without
this check this count will increment.
For subsquent connections, in tdls_send_update_to_fw()
because of incremented count, it will be treated as
FW Set State is already sent and will not send it
which will result in FW crash while adding TDLS peer.
Change-Id: Ic3bedfb1357ac703f98d2d0285dcc85605bab97e
CRs-Fixed: 2955401
When ipa setup pipes fails in wlan_ipa_uc_ol_init API,
tx buff mapping is not done but during deinit path
tx buff unmapping is called without mapping.
Fix this by resetting uc_loaded flag to false when ipa pipes
setup failure is encountered.
Change-Id: Ic34320e56cee9e60381d9203dd95e268d0ef392b
CRs-Fixed: 2957612
