qcacld-3.0: tx aggr support based on firmware capability

Currently ini based tx aggr support disabled due to firmware
incompatibility.

This change is to enable ini based tx aggr support based
on firmware capability.

Change-Id: Id5d7197f18fafd926de889f9b69ca2be90497fd2
CRs-Fixed: 2859709

components/mlme/dispatcher/inc/cfg_qos.h

@@ -24,12 +24,7 @@
 #ifndef __CFG_MLME_QOS_H
 #define __CFG_MLME_QOS_H
 
-#if defined(QCA_WIFI_QCA6290) || defined(QCA_WIFI_QCA6390) || \
-	defined(QCA_WIFI_QCA6490) || defined(QCA_WIFI_QCA6750)
 #define ADDBA_TXAGGR_SIZE 256
-#else
-#define ADDBA_TXAGGR_SIZE 64
-#endif
 
 /*
  * <ini>

core/wma/src/wma_features.c

@@ -78,6 +78,12 @@
  */
 #define WMA_SET_VDEV_IE_SOURCE_HOST 0x0
 
+/*
+ * Max AMPDU Tx Aggr supported size
+ */
+#define ADDBA_TXAGGR_SIZE_HELIUM 64
+#define ADDBA_TXAGGR_SIZE_LITHIUM 256
+
 static bool is_wakeup_event_console_logs_enabled = false;
 
 void wma_set_wakeup_logs_to_console(bool value)
@@ -4094,6 +4100,20 @@ QDF_STATUS wma_set_tx_rx_aggr_size(uint8_t vdev_id,
 		WMITLV_GET_STRUCT_TLVLEN(
 			wmi_vdev_set_custom_aggr_size_cmd_fixed_param));
 
+	if (wmi_service_enabled(wma_handle->wmi_handle,
+				wmi_service_ampdu_tx_buf_size_256_support)) {
+		cmd->enable_bitmap |= (0x1 << 6);
+		if (!(tx_size <= ADDBA_TXAGGR_SIZE_LITHIUM)) {
+			wma_err("Invalid AMPDU Size");
+			return QDF_STATUS_E_INVAL;
+		}
+	} else if (tx_size == ADDBA_TXAGGR_SIZE_LITHIUM) {
+		tx_size = ADDBA_TXAGGR_SIZE_HELIUM;
+	} else if (!(tx_size <= ADDBA_TXAGGR_SIZE_HELIUM)) {
+		wma_err("Invalid AMPDU Size");
+		return QDF_STATUS_E_INVAL;
+	}
+
 	cmd->vdev_id = vdev_id;
 	cmd->tx_aggr_size = tx_size;
 	cmd->rx_aggr_size = rx_size;
@@ -4101,8 +4121,6 @@ QDF_STATUS wma_set_tx_rx_aggr_size(uint8_t vdev_id,
 	if (aggr_type == WMI_VDEV_CUSTOM_AGGR_TYPE_AMSDU)
 		cmd->enable_bitmap |= 0x04;
 
-	cmd->enable_bitmap |= (0x1 << 6);
-
 	wma_debug("tx aggr: %d rx aggr: %d vdev: %d enable_bitmap %d",
 		 cmd->tx_aggr_size, cmd->rx_aggr_size, cmd->vdev_id,
 		 cmd->enable_bitmap);
@@ -4160,14 +4178,27 @@ QDF_STATUS wma_set_tx_rx_aggr_size_per_ac(WMA_HANDLE handle,
 		cmd->vdev_id = vdev_id;
 		cmd->rx_aggr_size = qos_aggr->rx_aggregation_size;
 		cmd->tx_aggr_size = tx_aggr_size[queue_num];
+
+		if (wmi_service_enabled(wma_handle->wmi_handle,
+					wmi_service_ampdu_tx_buf_size_256_support)) {
+			cmd->enable_bitmap |= (0x1 << 6);
+			if (!(tx_aggr_size[queue_num] <= ADDBA_TXAGGR_SIZE_LITHIUM)) {
+				wma_err("Invalid AMPDU Size");
+				return QDF_STATUS_E_INVAL;
+			}
+		} else if (tx_aggr_size[queue_num] == ADDBA_TXAGGR_SIZE_LITHIUM) {
+			tx_aggr_size[queue_num] = ADDBA_TXAGGR_SIZE_HELIUM;
+		} else if (!(tx_aggr_size[queue_num] <= ADDBA_TXAGGR_SIZE_HELIUM)) {
+			wma_err("Invalid AMPDU Size");
+			return QDF_STATUS_E_INVAL;
+		}
+
 		/* bit 5: tx_ac_enable, if set, ac bitmap is valid. */
-		cmd->enable_bitmap = 0x20 | queue_num;
+		cmd->enable_bitmap |= 0x20 | queue_num;
 		/* bit 2 (aggr_type): TX Aggregation Type (0=A-MPDU, 1=A-MSDU) */
 		if (aggr_type == WMI_VDEV_CUSTOM_AGGR_TYPE_AMSDU)
 			cmd->enable_bitmap |= 0x04;
 
-		cmd->enable_bitmap |= (0x1 << 6);
-
 		wma_debug("queue_num: %d, tx aggr: %d rx aggr: %d vdev: %d, bitmap: %d",
 			 queue_num, cmd->tx_aggr_size,
 			 cmd->rx_aggr_size, cmd->vdev_id,