As a part of the change I3cd617e52e86e2a890e35edb33b37ba3df8f4f6e
the max value of the ini gEnableDynamicDTIM was changed from 9 to 5.
This change causes regression where DUT is not entering in to DTIM9.
Restore back the max value of the ini to 9.
Change-Id: Ifea0c5199951a0dffc5cd116ec4c065f1563fe94
CRs-Fixed: 2489494
Currently, macro is used instead of destination size
to copy KEK pmo_gtk_req to kck and kek of
WMI_GTK_OFFLOAD_CMD_fixed_param.
Fix is to Copy KEK bytes from pmo_gtk_req same as the size of
cmd->kek i.e destination address to avoid macro change if size
of cmd->kck changes in future.
Change-Id: I06705f25682d950c35a3fb9bd0413ddf46e04ab4
CRs-Fixed: 2477212
WMI_STA_PS_PARAM_INACTIVITY_TIME and
WMI_STA_PS_PARAM_MAX_RESET_ITO_COUNT_ON_TIM_NO_TXRX
need to be sent as WMI_STA_POWERSAVE_PARAM_CMDID param IDs.
Thus use pmo_tgt_send_vdev_sta_ps_param instead of
pmo_tgt_vdev_update_param_req in appropriate locations.
Change-Id: Ie9438cd88540a9bbcaf120b3d0a32d355f85002d
CRs-fixed: 2457998
With current design, firmware sends the kck, kek and replay
counters as part of wmi_key_material tlv over the
WMI_ROAM_SYNCH_EVENTID event. But the maximum supported kck key
length in wmi_key_material was 16 bytes. But for FT Suite-B
(akm 00:0f:ac:13), the kck_bits is 24 bytes long and cannot be
sent over wmi_key_material. So firmware sends kck, kek and
replay counter values over the new tlv wmi_key_material_ext.
Host driver copies the kck key with fixed 16 byte length to the
upper layers. Introduce kck_length parameter in csr_roam_info
and roam_offload_synch_ind structures and copy kck based on this
length.
Also fix maximum number of AKM suites supported to 5, as some
certification test cases advertise 5 akms.
Change-Id: Iab050e3e3f7efead8070a02094998d15f7ffcbd0
CRs-Fixed: 2400770
Send idle roam trigger monitor command to firmware based on
the SET SUSPEND mode command received from the user space.
The set suspend mode value sent will be used by firmware as
one of the parameters in determining if the device is in
idle state. When set suspend mode is 1, device is not in
idle state else the device is considered idle if idle state
data packet count, idle rssi, inactivity time criteria are met.
Add changes to send the suspend mode value over the wmi
command WMI_IDLE_TRIGGER_MONITOR_CMDID.
Change-Id: Ia4531fdab140334dbb830e0d7486db07bbdfc7e8
CRs-Fixed: 2436221
In USB devices even if the driver returns an error from bus_suspend,
still the kernel/platform goes into suspend as any error from USB
bus_suspend is ignored.
During suspend, if WoW or suspend was NACked by FW, we should not
send WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, WMI_PDEV_RESUME_CMDID to disable
WoW or resume device (in the next system resume)
Add new PMO API to get target suspend state and use it to check if
device should be resumed.
Change-Id: Ic6be05f4f2d36ffe174774b6cd55c6da6b1ea1b8
CRs-Fixed: 2421591
Currently, the vdev connection status is checked by getting
the bss peer of that vdev, and if the bss peer is in associated
state then vdev connected status is sent as true. It can happen
vdev is present and bss peer is deleted after getting the bss peer
from vdev pointer. Then bss peer can not be dereferenced to get the
its status.
Instead remove all the duplicate api's tdls_is_vdev_connected,
pmo_core_is_vdev_connected, and wlan_vdev_is_connected with
wlan_vdev_is_up. wlan_vdev_is_up gives success status
if associated.
Change-Id: I863c3c0689f329870bd08c813813c16956135209
CRs-Fixed: 2424996
Currently there is no support to configure ito repeat
count when driver enters into wow mode.
Add support to configure ito repeat count with ini
gItoRepeatCount when driver enters into wow mode.
CRs-fixed: 2419137
Change-Id: I62d7e7df12342e9743c26e0147851347214a9ce7
Currently there is no support to configure the inactivity
timeout when driver goes to wow mode or when driver resumes
from wow mode.
Add support for PMO component to configure the wow mode
inactivity timeout with ini g_wow_data_inactivity_timeout
when driver enters into wow mode and when driver resumes
from wow mode add support to configure the inactivity
timeout for non wow mode with ini gDataInactivityTimeout.
CRs-fixed: 2412866
Change-Id: I0672f22a5dfec870e5e67b23058db2729b9a0848
Per the Linux Kernel coding style, as enforced by the kernel
checkpatch script, pointers should not be explicitly compared to
NULL. Therefore within pmo replace any such comparisons with logical
operations performed on the pointer itself.
Change-Id: I3697ede27e074252017e31be23caa93fc25885c5
CRs-Fixed: 2418398
Some malformed comments were discovered when generating
the official documentation of wlan cfg ini items.
Refine the documentation text of the following items
in one batch:
gEnableDynamicDTIM
g_sap_chanswitch_mode
gVhtChannelWidth
gDataInactivityTimeout
Change-Id: I2b1455d0ea27fd35dc0cf66316c7dc3b348ee0ac
CRs-Fixed: 2416086
1) 'ssdp' in t_wma_handle structure is not used anymore,
remove this redundant field.
2) ucfg_pmo_set_sta_mod_dtim and ucfg_pmo_get_sta_mod_dtim
should have been accessing 'sta_mod_dtim' instead of
'sta_dynamic_dtim' in struct pmo_psoc_cfg.
Change-Id: Iedd7bed1c9f637a819f97b6d8c687b784739dd62
CRs-Fixed: 2415087
Some malformed comments were discovered when generating
the official documentation of wlan cfg ini items.
Refine the documentation text of the following items
in one batch:
gEnableVendorVhtFor24GHzBand
hostArpOffload
ssdp
gEnableDynamicDTIM
gEnableModulatedDTIM
Change-Id: I3cd617e52e86e2a890e35edb33b37ba3df8f4f6e
CRs-Fixed: 2414259
The session_id field in struct pmo_wow_add_pattern does not serve any
purpose, so remove it.
Change-Id: I477b74c1360f124fb493440a8289fb2a4382c6d5
CRs-Fixed: 2404828
Some ini descriptions are different to common, and some of them
include wrong information, so correct them and use unified form.
Change-Id: I36348fb26a03cab254fd309d792125b8a21ad02f
CRs-Fixed: 2402446
Legacy WNI CFG items are refactored into new CFG implementation.
PMO uses a wma callback which uses cfg_get API to get listen
interval. Listen interval is now part of the MLME component's
private object. Define API's to get this value and use it instead
of the callbacks.
Remove WMA callback implementation and use new API that gets
listen interval from MLME component.
Change-Id: I797001ea14cc654f9daee3ce297e1ad0c0a08f2a
CRs-Fixed: 2386725
Change I3b1ee6254de158ad6408dc8c61e83be571e180af refactored 3
APF related INI's into CFG framework. This was merged with a
a copying error causing INI string "gActiveMcBcBpfMode" being
replaced by "gActiveUcBpfMode". Fix this by correcting the
string name.
Fix copying error by replacing with the correct INI string.
Change-Id: I41576b1b22287f7c0fd751ce96ceddb8f7cbc62a
CRs-Fixed: 2393504
Change I1f668fff633a5e5cdfc478e7f619e9600930b333 ("qcacld-3.0: Use wma
callback to get vdev dp handle") removed the implementation of
pmo_ucfg_vdev_update_dp_handle(), but left behind the stub
implementation for use when PMO is disabled. This stub, since renamed
to ucfg_pmo_vdev_update_dp_handle(), is unused, so remove it.
Change-Id: I042ea081a4c2e5288963f7882129d06667e5b707
CRs-Fixed: 2380780
Update the PMO packet filter APIs to make sure the parameter names
in the prototypes match the ones in the implementations and in the
documentation.
Change-Id: I7fd924d17edb54c690e8ef5b85d4829a4a165edc
CRs-Fixed: 2379075
Based on new cfg framework, refactor below WNI and INI cfg items:
- WNI_CFG_PS_WOW_DATA_INACTIVITY_TIMEOUT
- g_wow_data_inactivity_timeout
- gDisablePacketFilter
Change-Id: I9a975263021ba4fd5ccea19ed1147a661f73317f
CRs-Fixed: 2375866
Currently if a vdev is destroyed, wow patterns are not
getting cleared for that vdev, so when a new vdev is
created, host tries to configure new wow patterns for
this new vdev but due to FW limitations on number of
wow patterns that can be maintained at FW, FW is not
able to act on this filter and will not maintain this
new wow filter.
To resolve this issue, clear the wow patterns for the
vdev before it gets destroyed.
Change-Id: Iae7ad8b683c95d8eaf11355bc0e36b91cece2202
CRs-Fixed: 2344337
To keep names of PMO ucfg APIs consistent, change some of them from
"pmo_ucfg_xxx" to "ucfg_pmo_xxx".
Change-Id: I77165be8c5c408c3f91f84a477c15be1c6ea15e8
CRs-Fixed: 2334109
Based on cfg component, define PMO configures and add APIs to get or
set configures.
Change-Id: I9b9ff1f8701168787985cbcb219361a3f63c787f
CRs-Fixed: 2322176
Add debugfs entry to get offload info (mc addr list, arp, ns etc.,)
for STA interface.
Change-Id: I8bf4491929b5ef04ed5ce19f4b0030945f0eb0c0
CRs-Fixed: 2203786
Update driver to use NAN config params based converged CFG
component. Cleanup hdd config references to nan ini params.
Change-Id: I5af85d68ee53ad557e64523f7a1719e328536926
CRs-fixed: 2290360
Currently the host sends the fixed gtk offload params
and the FILS TLV params, even when the FILS feature is disabled
in the host, which force firmware to pick the KEK from the
FILS TLV structure rather than from the fixed param structure,
which further leads to GTK re-keying feature fail.
Fix is to send only the fixed params in case when host doesnt
supports FILS.
Change-Id: I5b3b3fd503c7cb9c4d7933074fd483086b113204
CRs-Fixed: 2244725
QDF_DEBUG_PANIC has recently gained a reason parameter. Move instance of
logging followed immediately by QDF_DEBUG_PANIC to single calls.
Change-Id: I6633296fb1c82a3945cedc967de222410b9f5d9b
CRs-Fixed: 2274413
Before wow enable or pdev suspend host sets hardware filter bitmap
and enables the filter via a command. But after resuming it sends
bitmap as zero with filter disable. This is interpreted by Firmware
as disable the modes set in the bitmap, so none of the modes are
disabled. With this host will not receive bc/mc packets after
disabling the hw filter, which it is expecting.
Send the same bitmap after resume that was used before suspend.
Change-Id: Ic7425274c9197e907404c3ca9ba0d5269ee51690
CRs-Fixed: 2194964
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I9e02edbc580ffb2c559c8e864f54d255fc2d51a3
CRs-Fixed: 2191530
PMO should not know about vdev data path handle, but
pmo_unpause_all_vdev() need it, so register a wma callback to retrieve
the vdev dp handle instead of keep a copy in pmo vdev private context.
Refine current code to retrieve vdev dp handle using a wma callback
Change-Id: I1f668fff633a5e5cdfc478e7f619e9600930b333
CRs-Fixed: 2227384
There are several logs in PMO that log debugging related information
at the INFO level. Reduce the logging level of these debug logs to
avoid spamming the console.
Change-Id: Ib1bb9279d5d8104104b58bd2c83869f72c0bde4a
CRs-Fixed: 2260190
Add support for getting cfg integer from PMO. Register callbacks
during pe_open/close so that PMO can query CFG int values for
calculating parameters like listen interval etc.
Change-Id: I52d165586576e547e175ba276e6b7225db5b27e0
CRs-Fixed: 2252661
Currently while sending wmi command when target is suspend, it will
check whether command is WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID/
WMI_PDEV_RESUME_CMDID, but D0WOW command is an exception, to keep align
with legacy code so don't set wmi_handle->is_target_suspended if it is
D0WOW enable command.
Move out logic of checking D0WOW status from PMO tgt to core layer.
Change-Id: I164f24ea733e54e5e0dbdb77344917df5d039e53
CRs-Fixed: 2254047
Total 16 number of WoW filters are PoRed for Genoa.
Define CONFIG_PMO_WOW_FILTERS in genoa defconfigs with value 16.
Change-Id: Iba3d9875c954b32a3f22cfd639f4508beb36a5d5
CRs-Fixed: 2257033
Current ucfg API's that disables wow events accept a u32 bitmap
variable. A pointer to that variable is passed to core API where
it assumes it as a u32 array of 4 bytes. This will lead to out of
bound memory access.
Change wow enable/disable API's to accept wow event type as the
parameter.
Change-Id: I220aaddfea62ab96f121014d0d65a1406988c946
CRs-Fixed: 2233108
wma_is_service_enabled can't get valid service bitmap if call in
hdd_update_pmo_config, use psoc_ctx->caps.unified_wow instead to check
pattern id per vdev and legacy d0 wow capability.
Change-Id: If7bf316f482c49253fc4b95b94e172727b27ffd1
CRs-Fixed: 2225847
