qcacld-3.0: Split PMO configures into different files

Split PMO configures into different files by feature. Remove
unnecessary macro limitation.

Change-Id: I1e431fd2f38988c771e02c979c5ce55d0627e605
CRs-Fixed: 2323999

components/pmo/dispatcher/inc/wlan_pmo_apf_cfg.h

@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef WLAN_PMO_APF_CFG_H__
+#define WLAN_PMO_APF_CFG_H__
+
+/*
+ * <ini>
+ * gBpfFilterEnable - APF feature support configuration
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * When set to 1 APF feature will be enabled.
+ *
+ * Supported Feature: Android packet filter
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_APF_ENABLE CFG_INI_BOOL("gBpfFilterEnable", \
+					1, \
+					"Enable APF Support")
+
+#define CFG_PMO_APF_ALL \
+	CFG(CFG_PMO_APF_ENABLE)
+
+#endif /* WLAN_PMO_APF_CFG_H__ */

components/pmo/dispatcher/inc/wlan_pmo_cfg.h

@@ -19,807 +19,19 @@
 #ifndef WLAN_PMO_CFG_H__
 #define WLAN_PMO_CFG_H__
 
-#include "wlan_pmo_common_public_struct.h"
-
-/*
- * <ini>
- * hostArpOffload - Enable/disable host ARP offload
- * @Min: 0
- * @Max: 1
- * @Default: 1
- *
- * This ini is used to enable/disable host ARP offload.
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_ENABLE_HOST_ARPOFFLOAD CFG_INI_BOOL( \
-	"hostArpOffload", \
-	1, \
-	"enable/disable host arp offload")
-
-/*
- * <ini>
- * gHwFilterMode - configure hardware filter for DTIM mode
- * @Min: 0
- * @Max: 3
- * @Default: 1
- *
- * The hardware filter is only effective in DTIM mode. Use this configuration
- * to blanket drop broadcast/multicast packets at the hardware level, without
- * waking up the firmware
- *
- * Takes a bitmap of frame types to drop
- * @E.g.
- *	# disable feature
- *	gHwFilterMode=0
- *	# drop all broadcast frames, except ARP (default)
- *	gHwFilterMode=1
- *	# drop all multicast frames, except ICMPv6
- *	gHwFilterMode=2
- *	# drop all broadcast and multicast frames, except ARP and ICMPv6
- *	gHwFilterMode=3
- *
- * Related: N/A
- *
- * Usage: Internal/External
- *
- * </ini>
- */
-#define CFG_PMO_HW_FILTER_MODE CFG_INI_UINT( \
-	"gHwFilterMode", \
-	0, \
-	3, \
-	1, \
-	CFG_VALUE_OR_DEFAULT, \
-	"hardware filter for DTIM mode")
-
-/*
- * <ini>
- * ssdp - Enable/disable ssdp
- * @Min: 0
- * @Max: 1
- * @Default: 1
- *
- * This ini is used to enable/disable ssdp.
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_ENABLE_HOST_SSDP CFG_INI_BOOL( \
-	"ssdp", \
-	1, \
-	"Enable/disable ssdp")
-
-#ifdef FEATURE_RUNTIME_PM
-/*
- * <ini>
- * gRuntimePMDelay - Set runtime pm's inactivity timer
- * @Min: 100
- * @Max: 10000
- * @Default: 500
- *
- * This ini is used to set runtime pm's inactivity timer value.
- * the wlan driver will wait for this number of milliseconds of
- * inactivity before performing a runtime suspend.
- *
- * Related: gRuntimePM
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_RUNTIME_PM_DELAY CFG_INI_UINT( \
-	"gRuntimePMDelay", \
-	100, \
-	10000, \
-	500, \
-	CFG_VALUE_OR_DEFAULT, \
-	"Set runtime pm's inactivity timer")
-#endif /* FEATURE_RUNTIME_PM */
-
-/*
- * <ini>
- * hostNSOffload - Enable/disable NS offload
- * @Min: 0
- * @Max: 1
- * @Default: 1
- *
- * This ini is used to enable/disable NS offload.
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_ENABLE_HOST_NSOFFLOAD CFG_INI_BOOL( \
-	"hostNSOffload", \
-	1, \
-	"Enable/disable NS offload")
-
-/*
- * <ini>
- * gEnableDynamicDTIM - Enable Dynamic DTIM
- * @Min: 0
- * @Max: 9
- * @Default: 0
- *
- * This ini is used to enable/disable ssdp.
- *
- * 0 -Disable DynamicDTIM
- * 1 to 5 - SLM will switch to DTIM specified here when host suspends and
- *          switch DTIM1 when host resumes
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_ENABLE_DYNAMIC_DTIM CFG_INI_UINT( \
-	"gEnableDynamicDTIM", \
-	0, \
-	9, \
-	0, \
-	CFG_VALUE_OR_DEFAULT, \
-	"Enable Dynamic DTIM")
-
-/*
- * <ini>
- * gEnableDynamicDTIM - Enable/Disable modulated DTIM feature
- * @Min: 0
- * @Max: 5
- * @Default: 0
- *
- * This ini is used to enable/disable modulated DTIM feature.
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_ENABLE_MODULATED_DTIM CFG_INI_UINT( \
-	"gEnableModulatedDTIM", \
-	0, \
-	5, \
-	0, \
-	CFG_VALUE_OR_DEFAULT, \
-	"Enable/disable modulated DTIM feature")
-
-/*
- * <ini>
- * gMCAddrListEnable - Enable/disable multicast MAC address list feature
- * @Min: 0
- * @Max: 1
- * @Default: 1
- *
- * This ini is used to enable/disable multicast MAC address list feature.
- * Default: Enable
- *
- * Related: None
- *
- * Supported Feature: STA
- *
- * Usage: Internal/External
- *
- * </ini>
- */
-#define CFG_PMO_MC_ADDR_LIST_ENABLE CFG_INI_BOOL( \
-	"gMCAddrListEnable", \
-	1, \
-	"Enable/disable multicast MAC address list feature")
-
-/*
- * <ini>
- * gEnablePowerSaveOffload - Enable Power Save Offload
- * @Min: 0
- * @Max: 5
- * @Default: 0
- *
- * This ini is used to set Power Save Offload configuration:
- * Current values of gEnablePowerSaveOffload:
- * 0 -> Power save offload is disabled
- * 1 -> Legacy Power save enabled + Deep sleep Disabled
- * 2 -> QPower enabled + Deep sleep Disabled
- * 3 -> Legacy Power save enabled + Deep sleep Enabled
- * 4 -> QPower enabled + Deep sleep Enabled
- * 5 -> Duty cycling QPower enabled
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_POWERSAVE_OFFLOAD CFG_INI_UINT( \
-	"gEnablePowerSaveOffload", \
-	0, \
-	5, \
-	0, \
-	CFG_VALUE_OR_DEFAULT, \
-	"Enable Power Save Offload")
-
-/*
- * <ini>
- * gMaxPsPoll - Max powersave poll
- * @Min: 0
- * @Max: 255
- * @Default: 0
- *
- * This ini is used to set max powersave poll.
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_MAX_PS_POLL CFG_INI_UINT( \
-		"gMaxPsPoll", \
-		0, \
-		255, \
-		0, \
-		CFG_VALUE_OR_DEFAULT, \
-		"Max powersave poll")
-
-/*
- * <ini>
- * gEnableWoW - Enable/Disable WoW
- * @Min: 0
- * @Max: 3
- * @Default: 3
- *
- * This ini is used to enable/disable WoW. Configurations are as follows:
- * 0 - Disable both magic pattern match and pattern byte match.
- * 1 - Enable magic pattern match on all interfaces.
- * 2 - Enable pattern byte match on all interfaces.
- * 3 - Enable both magic patter and pattern byte match on all interfaces.
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_WOW_ENABLE CFG_INI_UINT("gEnableWoW", \
-					0, 3, 3, \
-					CFG_VALUE_OR_DEFAULT, \
-					"Enable WoW Support")
-/*
- * <ini>
- * wowlan_deauth_enable - Enable/Disable wowlan deauth enable
- * @Min: 0
- * @Max: 1
- * @Default: 1
- *
- * This ini is used to enable/disable wowlan deauth enable.
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_WOWLAN_DEAUTH_ENABLE CFG_INI_BOOL("wowlan_deauth_enable", \
-						  1, \
-						  "Enable WoWLan deauth")
-/*
- * <ini>
- * wowlan_disassoc_enable - Enable/Disable wowlan disassoc enable
- * @Min: 0
- * @Max: 1
- * @Default: 1
- *
- * This ini is used to enable/disable wowlan disassoc enable.
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_WOWLAN_DISASSOC_ENABLE CFG_INI_BOOL("wowlan_disassoc_enable", \
-						    1, \
-						    "Enable WoW Support")
-
-#ifdef WLAN_FEATURE_EXTWOW_SUPPORT
-/*
- * <ini>
- * gExtWoWgotoSuspend - Enable/Disable Extended WoW
- * @Min: 0
- * @Max: 1
- * @Default: 1
- *
- * This ini is used to enable/disable Extended WoW.
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_GOTO_SUSPEND CFG_INI_BOOL("gExtWoWgotoSuspend", \
-					     1, \
-					     "Enable Ext WoW goto support")
-/*
- * <ini>
- * gExtWowApp1WakeupPinNumber - Set wakeup1 PIN number
- * @Min: 0
- * @Max: 255
- * @Default: 12
- *
- * This ini is used to set EXT WOW APP1 wakeup PIN number
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_APP1_WAKE_PIN_NUMBER \
-		CFG_INI_UINT("gExtWowApp1WakeupPinNumber", \
-			     0, 255, 12, \
-			     CFG_VALUE_OR_DEFAULT, \
-			     "Set wakeup1 PIN number")
-/*
- * <ini>
- * gExtWowApp2WakeupPinNumber - Set wakeup2 PIN number
- * @Min: 0
- * @Max: 255
- * @Default: 16
- *
- * This ini is used to set EXT WOW APP2 wakeup PIN number
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_APP2_WAKE_PIN_NUMBER \
-		CFG_INI_UINT("gExtWowApp2WakeupPinNumber", \
-			     0, 255, 16, \
-			     CFG_VALUE_OR_DEFAULT, \
-			     "Set wakeup2 PIN number")
-/*
- * <ini>
- * gExtWoWApp2KAInitPingInterval - Set Keep Alive Init Ping Interval
- * @Min: 0
- * @Max: 0xffffffff
- * @Default: 240
- *
- * This ini is used to set Keep Alive Init Ping Interval for EXT WOW
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_KA_INIT_PING_INTERVAL \
-		CFG_INI_UINT("gExtWoWApp2KAInitPingInterval", \
-			     0, 0xffffffff, 240, \
-			     CFG_VALUE_OR_DEFAULT, \
-			     "Set Keep Alive Init Ping Interval")
-/*
- * <ini>
- * gExtWoWApp2KAMinPingInterval - Set Keep Alive Minimum Ping Interval
- * @Min: 0
- * @Max: 0xffffffff
- * @Default: 240
- *
- * This ini is used to set Keep Alive Minimum Ping Interval for EXT WOW
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_KA_MIN_PING_INTERVAL \
-		CFG_INI_UINT("gExtWoWApp2KAMinPingInterval", \
-			     0, 0xffffffff, 240, \
-			     CFG_VALUE_OR_DEFAULT, \
-			     "Set Keep Alive Minimum Ping Interval")
-/*
- * <ini>
- * gExtWoWApp2KAMaxPingInterval - Set Keep Alive Maximum Ping Interval
- * @Min: 0
- * @Max: 0xffffffff
- * @Default: 1280
- *
- * This ini is used to set Keep Alive Maximum Ping Interval for EXT WOW
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_KA_MAX_PING_INTERVAL \
-		CFG_INI_UINT("gExtWoWApp2KAMaxPingInterval", \
-			     0, 0xffffffff, 1280, \
-			     CFG_VALUE_OR_DEFAULT, \
-			     "Set Keep Alive Maximum Ping Interval")
-/*
- * <ini>
- * gExtWoWApp2KAIncPingInterval - Set Keep Alive increment of Ping Interval
- * @Min: 0
- * @Max: 0xffffffff
- * @Default: 4
- *
- * This ini is used to set Keep Alive increment of Ping Interval for EXT WOW
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_KA_INC_PING_INTERVAL \
-		CFG_INI_UINT("gExtWoWApp2KAIncPingInterval", \
-			     0, 0xffffffff, 4, \
-			     CFG_VALUE_OR_DEFAULT, \
-			     "Set Keep Alive increment of Ping Interval")
-/*
- * <ini>
- * gExtWoWApp2KAIncPingInterval - Set TCP source port
- * @Min: 0
- * @Max: 65535
- * @Default: 5000
- *
- * This ini is used to set TCP source port when EXT WOW is enabled
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_TCP_SRC_PORT \
-		CFG_INI_UINT("gExtWoWApp2KAIncPingInterval", \
-			     0, 65535, 5000, \
-			     CFG_VALUE_OR_DEFAULT, \
-			     "Set TCP source port")
-/*
- * <ini>
- * gExtWoWApp2TcpDstPort - Set TCP Destination port
- * @Min: 0
- * @Max: 65535
- * @Default: 5001
- *
- * This ini is used to set TCP Destination port when EXT WOW is enabled
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_TCP_DST_PORT \
-		CFG_INI_UINT("gExtWoWApp2TcpDstPort", \
-			     0, 65535, 5001, \
-			     CFG_VALUE_OR_DEFAULT, \
-			     "Set TCP Destination port")
-/*
- * <ini>
- * gExtWoWApp2TcpTxTimeout - Set TCP tx timeout
- * @Min: 0
- * @Max: 0xffffffff
- * @Default: 200
- *
- * This ini is used to set TCP Tx timeout when EXT WOW is enabled
- *
- * Related: None
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_TCP_TX_TIMEOUT \
-		CFG_INI_UINT("gExtWoWApp2TcpTxTimeout", \
-			     0, 0xffffffff, 200, \
-			     CFG_VALUE_OR_DEFAULT, \
-			     "Set TCP tx timeout")
-
-/*
- * <ini>
- * gExtWoWApp2TcpRxTimeout - Set TCP rx timeout
- * @Min: 0
- * @Max: 0xffffffff
- * @Default: 200
- *
- * This ini is used to set TCP Rx timeout when EXT WOW is enabled
- *
- * Supported Feature: Power Save
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_EXTWOW_TCP_RX_TIMEOUT \
-		CFG_INI_UINT("gExtWoWApp2TcpRxTimeout", \
-			     0, 0xffffffff, 200, \
-			     CFG_VALUE_OR_DEFAULT, \
-			     "ExtWow App2 tcp rx timeout")
-#endif
-
-/*
- * <ini>
- * gBpfFilterEnable - APF feature support configuration
- * @Min: 0
- * @Max: 1
- * @Default: 1
- *
- * When set to 1 APF feature will be enabled.
- *
- * Supported Feature: Android packet filter
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_APF_ENABLE CFG_INI_BOOL("gBpfFilterEnable", \
-					1, \
-					"Enable APF Support")
-
-/*
- * <ini>
- * gActiveModeOffload - Active offload mode configuration
- * @Min: 0
- * @Max: 1
- * @Default: 1
- *
- * When set to 1 active mode offload will be enabled.
- *
- * If active mode offload is enabled then all applicable data offload/filtering
- * is enabled immediately in FW once config is available in WLAN driver and FW
- * caches this configuration across suspend/resume;
- * If active mode offload is disabled then all applicable data offload/filtering
- * is enabled during cfg80211 suspend and disabled during cfg80211 resume.
- *
- * Supported Feature: Active mode offload
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_ACTIVE_MODE CFG_INI_BOOL("gActiveModeOffload", \
-					 1, \
-					 "Enable active mode offload")
-
-/*
- * <ini>
- * gwow_pulse_support - WOW pulse feature configuration
- * @Min: 0
- * @Max: 1
- * @Default: 0
- *
- * When set to 1 WOW pulse feature will be enabled.
- *
- * Related: gwow_pulse_pin, gwow_pulse_interval_low, gwow_pulse_interval_high
- *
- * Supported Feature: WOW pulse
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_WOW_PULSE_ENABLE CFG_INI_BOOL("gwow_pulse_support", \
-					      0, \
-					      "Enable wow pulse")
-
-/*
- * <ini>
- * gwow_pulse_pin - GPIO pin for WOW pulse
- * @Min: 0
- * @Max: 254
- * @Default: 35
- *
- * Which PIN to send the Pulse
- *
- * Supported Feature: WOW pulse
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_WOW_PULSE_PIN CFG_INI_UINT("gwow_pulse_pin", \
-					   0, 254, 35, \
-					   CFG_VALUE_OR_DEFAULT, \
-					   "Pin for wow pulse")
-
-/*
- * <ini>
- * gwow_pulse_interval_low - Pulse interval low
- * @Min: 160
- * @Max: 480
- * @Default: 180
- *
- * The interval of low level in the pulse
- *
- * Supported Feature: WOW pulse
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_WOW_PULSE_LOW CFG_INI_UINT("gwow_pulse_interval_low", \
-					   160, 480, 180, \
-					   CFG_VALUE_OR_DEFAULT, \
-					   "Interval of low pulse")
-
-/*
- * <ini>
- * gwow_pulse_interval_high - Pulse interval high
- * @Min: 20
- * @Max: 40
- * @Default: 20
- *
- * The interval of high level in the pulse
- *
- * Supported Feature: WOW pulse
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_WOW_PULSE_HIGH CFG_INI_UINT("gwow_pulse_interval_high", \
-					    20, 40, 20, \
-					    CFG_VALUE_OR_DEFAULT, \
-					    "Interval of high pulse")
-
-/*
- * <ini>
- * g_auto_detect_power_failure_mode - Auto detect power save failure mode
- * @Min: PMO_FW_TO_CRASH_ON_PWR_FAILURE
- * @Max: PMO_AUTO_PWR_FAILURE_DETECT_DISABLE
- * @Default: PMO_FW_TO_CRASH_ON_PWR_FAILURE
- *
- * Specifies the behavior of FW in case of CHIP_POWER_SAVE_FAIL_DETECTED event
- *
- * Supported Feature: Auto detect power save failure
- *
- * Usage: External
- *
- * </ini>
- */
-#define CFG_PMO_PWR_FAILURE CFG_INI_UINT("g_auto_detect_power_failure_mode", \
-					 PMO_FW_TO_CRASH_ON_PWR_FAILURE, \
-					 PMO_AUTO_PWR_FAILURE_DETECT_DISABLE, \
-					 PMO_FW_TO_CRASH_ON_PWR_FAILURE, \
-					 CFG_VALUE_OR_DEFAULT, \
-					 "Auto detect power save failure mode")
-
-/*
- * <ini>
- * g_enable_packet_filter_bitmap - Packet filters configuration
- * @Min: 0
- * @Max: 63
- * @Default: 0
- *
- * To enable packet filters when target goes to suspend, clear when resume:
- * bit-0 : IPv6 multicast
- * bit-1 : IPv4 multicast
- * bit-2 : IPv4 broadcast
- * bit-3 : XID - Exchange station Identification packet, solicits the
- *         identification of the receiving station
- * bit-4 : STP - Spanning Tree Protocol, builds logical loop free topology
- * bit-5 : DTP/LLC/CDP
- *         DTP - Dynamic Trunking Protocol is used by Cisco switches to
- *               negotiate whether an interconnection between two switches
- *               should be put into access or trunk mode
- *         LLC - Logical link control, used for multiplexing, flow & error
- *               control
- *         CDP - Cisco Discovery Protocol packet contains information about the
- *               cisco devices in the network
- *
- * Supported Feature: Packet filtering
- *
- * Usage: Internal/External
- *
- * </ini>
- */
-#define CFG_PMO_PKT_FILTER CFG_INI_UINT("g_enable_packet_filter_bitmap", \
-					0, 63, 0, \
-					CFG_VALUE_OR_DEFAULT, \
-					"Packet filter bitmap configure")
-
-#ifdef WLAN_FEATURE_EXTWOW_SUPPORT
-	#define CFG_EXTWOW_ALL \
-		CFG(CFG_EXTWOW_GOTO_SUSPEND) \
-		CFG(CFG_EXTWOW_APP1_WAKE_PIN_NUMBER) \
-		CFG(CFG_EXTWOW_APP2_WAKE_PIN_NUMBER) \
-		CFG(CFG_EXTWOW_KA_INIT_PING_INTERVAL) \
-		CFG(CFG_EXTWOW_KA_MIN_PING_INTERVAL) \
-		CFG(CFG_EXTWOW_KA_MAX_PING_INTERVAL) \
-		CFG(CFG_EXTWOW_KA_INC_PING_INTERVAL) \
-		CFG(CFG_EXTWOW_TCP_SRC_PORT) \
-		CFG(CFG_EXTWOW_TCP_DST_PORT) \
-		CFG(CFG_EXTWOW_TCP_TX_TIMEOUT) \
-		CFG(CFG_EXTWOW_TCP_RX_TIMEOUT)
-#else
-	#define CFG_EXTWOW_ALL
-#endif
-
-#ifdef FEATURE_WLAN_APF
-	#define CFG_PMO_APF_ALL \
-	CFG(CFG_PMO_APF_ENABLE)
-#else
-	#define CFG_PMO_APF_ALL
-#endif
-
-#ifdef WLAN_FEATURE_WOW_PULSE
-	#define CFG_WOW_ALL \
-	CFG(CFG_PMO_WOW_PULSE_ENABLE) \
-	CFG(CFG_PMO_WOW_PULSE_PIN) \
-	CFG(CFG_PMO_WOW_PULSE_LOW) \
-	CFG(CFG_PMO_WOW_PULSE_HIGH)
-#else
-	#define CFG_WOW_ALL
-#endif
-
-#ifdef WLAN_FEATURE_PACKET_FILTERING
-	#define CFG_PACKET_FILTERING_ALL \
-	CFG(CFG_PMO_PKT_FILTER)
-#else
-	#define CFG_PACKET_FILTERING_ALL
-#endif
-
-#ifdef FEATURE_RUNTIME_PM
-	#define CFG_RUNTIME_PM_ALL \
-	CFG(CFG_PMO_RUNTIME_PM_DELAY)
-#else
-	#define CFG_RUNTIME_PM_ALL
-#endif
-
-#define CFG_PMO_BASIC_ALL \
-	CFG(CFG_PMO_ENABLE_HOST_ARPOFFLOAD) \
-	CFG(CFG_PMO_HW_FILTER_MODE) \
-	CFG(CFG_PMO_ENABLE_HOST_SSDP) \
-	CFG(CFG_PMO_ENABLE_HOST_NSOFFLOAD) \
-	CFG(CFG_PMO_ENABLE_DYNAMIC_DTIM) \
-	CFG(CFG_PMO_ENABLE_MODULATED_DTIM) \
-	CFG(CFG_PMO_MC_ADDR_LIST_ENABLE) \
-	CFG(CFG_PMO_POWERSAVE_OFFLOAD) \
-	CFG(CFG_PMO_MAX_PS_POLL) \
-	CFG(CFG_PMO_WOWLAN_DEAUTH_ENABLE) \
-	CFG(CFG_PMO_WOWLAN_DISASSOC_ENABLE) \
-	CFG(CFG_PMO_WOW_ENABLE) \
-	CFG(CFG_PMO_ACTIVE_MODE) \
-	CFG(CFG_PMO_PWR_FAILURE)
+#include "wlan_pmo_apf_cfg.h"
+#include "wlan_pmo_common_cfg.h"
+#include "wlan_pmo_extwow_cfg.h"
+#include "wlan_pmo_pkt_filter_cfg.h"
+#include "wlan_pmo_runtime_pm_cfg.h"
+#include "wlan_pmo_wow_pulse_cfg.h"
 
 #define CFG_PMO_ALL \
 	CFG_EXTWOW_ALL \
-	CFG_PACKET_FILTERING_ALL \
+	CFG_PACKET_FILTER_ALL \
 	CFG_PMO_APF_ALL \
-	CFG_PMO_BASIC_ALL \
+	CFG_PMO_COMMON_ALL \
 	CFG_RUNTIME_PM_ALL \
-	CFG_WOW_ALL
+	CFG_WOW_PULSE_ALL
+
 #endif /* WLAN_PMO_CFG_H__ */

components/pmo/dispatcher/inc/wlan_pmo_common_cfg.h

@@ -0,0 +1,365 @@
+/*
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef WLAN_PMO_COMMON_CFG_H__
+#define WLAN_PMO_COMMON_CFG_H__
+
+#include "wlan_pmo_common_public_struct.h"
+
+/*
+ * <ini>
+ * hostArpOffload - Enable/disable host ARP offload
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to enable/disable host ARP offload.
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_ENABLE_HOST_ARPOFFLOAD CFG_INI_BOOL( \
+	"hostArpOffload", \
+	1, \
+	"enable/disable host arp offload")
+
+/*
+ * <ini>
+ * gHwFilterMode - configure hardware filter for DTIM mode
+ * @Min: 0
+ * @Max: 3
+ * @Default: 1
+ *
+ * The hardware filter is only effective in DTIM mode. Use this configuration
+ * to blanket drop broadcast/multicast packets at the hardware level, without
+ * waking up the firmware
+ *
+ * Takes a bitmap of frame types to drop
+ * @E.g.
+ *	# disable feature
+ *	gHwFilterMode=0
+ *	# drop all broadcast frames, except ARP (default)
+ *	gHwFilterMode=1
+ *	# drop all multicast frames, except ICMPv6
+ *	gHwFilterMode=2
+ *	# drop all broadcast and multicast frames, except ARP and ICMPv6
+ *	gHwFilterMode=3
+ *
+ * Related: N/A
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_PMO_HW_FILTER_MODE CFG_INI_UINT( \
+	"gHwFilterMode", \
+	0, \
+	3, \
+	1, \
+	CFG_VALUE_OR_DEFAULT, \
+	"hardware filter for DTIM mode")
+
+/*
+ * <ini>
+ * ssdp - Enable/disable ssdp
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to enable/disable ssdp.
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_ENABLE_HOST_SSDP CFG_INI_BOOL( \
+	"ssdp", \
+	1, \
+	"Enable/disable ssdp")
+
+/*
+ * <ini>
+ * hostNSOffload - Enable/disable NS offload
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to enable/disable NS offload.
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_ENABLE_HOST_NSOFFLOAD CFG_INI_BOOL( \
+	"hostNSOffload", \
+	1, \
+	"Enable/disable NS offload")
+
+/*
+ * <ini>
+ * gEnableDynamicDTIM - Enable Dynamic DTIM
+ * @Min: 0
+ * @Max: 9
+ * @Default: 0
+ *
+ * This ini is used to enable/disable ssdp.
+ *
+ * 0 -Disable DynamicDTIM
+ * 1 to 5 - SLM will switch to DTIM specified here when host suspends and
+ *          switch DTIM1 when host resumes
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_ENABLE_DYNAMIC_DTIM CFG_INI_UINT( \
+	"gEnableDynamicDTIM", \
+	0, \
+	9, \
+	0, \
+	CFG_VALUE_OR_DEFAULT, \
+	"Enable Dynamic DTIM")
+
+/*
+ * <ini>
+ * gEnableDynamicDTIM - Enable/Disable modulated DTIM feature
+ * @Min: 0
+ * @Max: 5
+ * @Default: 0
+ *
+ * This ini is used to enable/disable modulated DTIM feature.
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_ENABLE_MODULATED_DTIM CFG_INI_UINT( \
+	"gEnableModulatedDTIM", \
+	0, \
+	5, \
+	0, \
+	CFG_VALUE_OR_DEFAULT, \
+	"Enable/disable modulated DTIM feature")
+
+/*
+ * <ini>
+ * gMCAddrListEnable - Enable/disable multicast MAC address list feature
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to enable/disable multicast MAC address list feature.
+ * Default: Enable
+ *
+ * Related: None
+ *
+ * Supported Feature: STA
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_PMO_MC_ADDR_LIST_ENABLE CFG_INI_BOOL( \
+	"gMCAddrListEnable", \
+	1, \
+	"Enable/disable multicast MAC address list feature")
+
+/*
+ * <ini>
+ * gEnablePowerSaveOffload - Enable Power Save Offload
+ * @Min: 0
+ * @Max: 5
+ * @Default: 0
+ *
+ * This ini is used to set Power Save Offload configuration:
+ * Current values of gEnablePowerSaveOffload:
+ * 0 -> Power save offload is disabled
+ * 1 -> Legacy Power save enabled + Deep sleep Disabled
+ * 2 -> QPower enabled + Deep sleep Disabled
+ * 3 -> Legacy Power save enabled + Deep sleep Enabled
+ * 4 -> QPower enabled + Deep sleep Enabled
+ * 5 -> Duty cycling QPower enabled
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_POWERSAVE_OFFLOAD CFG_INI_UINT( \
+	"gEnablePowerSaveOffload", \
+	0, \
+	5, \
+	0, \
+	CFG_VALUE_OR_DEFAULT, \
+	"Enable Power Save Offload")
+
+/*
+ * <ini>
+ * gMaxPsPoll - Max powersave poll
+ * @Min: 0
+ * @Max: 255
+ * @Default: 0
+ *
+ * This ini is used to set max powersave poll.
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_MAX_PS_POLL CFG_INI_UINT( \
+		"gMaxPsPoll", \
+		0, \
+		255, \
+		0, \
+		CFG_VALUE_OR_DEFAULT, \
+		"Max powersave poll")
+
+/*
+ * <ini>
+ * gEnableWoW - Enable/Disable WoW
+ * @Min: 0
+ * @Max: 3
+ * @Default: 3
+ *
+ * This ini is used to enable/disable WoW. Configurations are as follows:
+ * 0 - Disable both magic pattern match and pattern byte match.
+ * 1 - Enable magic pattern match on all interfaces.
+ * 2 - Enable pattern byte match on all interfaces.
+ * 3 - Enable both magic patter and pattern byte match on all interfaces.
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_WOW_ENABLE CFG_INI_UINT("gEnableWoW", \
+					0, 3, 3, \
+					CFG_VALUE_OR_DEFAULT, \
+					"Enable WoW Support")
+/*
+ * <ini>
+ * wowlan_deauth_enable - Enable/Disable wowlan deauth enable
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to enable/disable wowlan deauth enable.
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_WOWLAN_DEAUTH_ENABLE CFG_INI_BOOL("wowlan_deauth_enable", \
+						  1, \
+						  "Enable WoWLan deauth")
+/*
+ * <ini>
+ * wowlan_disassoc_enable - Enable/Disable wowlan disassoc enable
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to enable/disable wowlan disassoc enable.
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_WOWLAN_DISASSOC_ENABLE CFG_INI_BOOL("wowlan_disassoc_enable", \
+						    1, \
+						    "Enable WoW Support")
+
+/*
+ * <ini>
+ * gActiveModeOffload - Active offload mode configuration
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * When set to 1 active mode offload will be enabled.
+ *
+ * If active mode offload is enabled then all applicable data offload/filtering
+ * is enabled immediately in FW once config is available in WLAN driver and FW
+ * caches this configuration across suspend/resume;
+ * If active mode offload is disabled then all applicable data offload/filtering
+ * is enabled during cfg80211 suspend and disabled during cfg80211 resume.
+ *
+ * Supported Feature: Active mode offload
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_ACTIVE_MODE CFG_INI_BOOL("gActiveModeOffload", \
+					 1, \
+					 "Enable active mode offload")
+
+/*
+ * <ini>
+ * g_auto_detect_power_failure_mode - Auto detect power save failure mode
+ * @Min: PMO_FW_TO_CRASH_ON_PWR_FAILURE
+ * @Max: PMO_AUTO_PWR_FAILURE_DETECT_DISABLE
+ * @Default: PMO_FW_TO_CRASH_ON_PWR_FAILURE
+ *
+ * Specifies the behavior of FW in case of CHIP_POWER_SAVE_FAIL_DETECTED event
+ *
+ * Supported Feature: Auto detect power save failure
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_PWR_FAILURE CFG_INI_UINT("g_auto_detect_power_failure_mode", \
+					 PMO_FW_TO_CRASH_ON_PWR_FAILURE, \
+					 PMO_AUTO_PWR_FAILURE_DETECT_DISABLE, \
+					 PMO_FW_TO_CRASH_ON_PWR_FAILURE, \
+					 CFG_VALUE_OR_DEFAULT, \
+					 "Auto detect power save failure mode")
+
+#define CFG_PMO_COMMON_ALL \
+	CFG(CFG_PMO_ENABLE_HOST_ARPOFFLOAD) \
+	CFG(CFG_PMO_HW_FILTER_MODE) \
+	CFG(CFG_PMO_ENABLE_HOST_SSDP) \
+	CFG(CFG_PMO_ENABLE_HOST_NSOFFLOAD) \
+	CFG(CFG_PMO_ENABLE_DYNAMIC_DTIM) \
+	CFG(CFG_PMO_ENABLE_MODULATED_DTIM) \
+	CFG(CFG_PMO_MC_ADDR_LIST_ENABLE) \
+	CFG(CFG_PMO_POWERSAVE_OFFLOAD) \
+	CFG(CFG_PMO_MAX_PS_POLL) \
+	CFG(CFG_PMO_WOWLAN_DEAUTH_ENABLE) \
+	CFG(CFG_PMO_WOWLAN_DISASSOC_ENABLE) \
+	CFG(CFG_PMO_WOW_ENABLE) \
+	CFG(CFG_PMO_ACTIVE_MODE) \
+	CFG(CFG_PMO_PWR_FAILURE)
+
+#endif /* WLAN_PMO_COMMON_CFG_H__ */

components/pmo/dispatcher/inc/wlan_pmo_common_public_struct.h

@@ -340,9 +340,7 @@ enum pmo_auto_pwr_detect_failure_mode {
  */
 struct pmo_psoc_cfg {
 	bool ptrn_match_enable_all_vdev;
-#ifdef FEATURE_WLAN_APF
 	bool apf_enable;
-#endif
 	bool arp_offload_enable;
 	enum pmo_hw_filter_mode hw_filter_mode_bitmap;
 	bool ns_offload_enable_static;

components/pmo/dispatcher/inc/wlan_pmo_extwow_cfg.h

@@ -0,0 +1,278 @@
+/*
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef WLAN_PMO_EXTWOW_CFG_H__
+#define WLAN_PMO_EXTWOW_CFG_H__
+
+#ifdef WLAN_FEATURE_EXTWOW_SUPPORT
+/*
+ * <ini>
+ * gExtWoWgotoSuspend - Enable/Disable Extended WoW
+ * @Min: 0
+ * @Max: 1
+ * @Default: 1
+ *
+ * This ini is used to enable/disable Extended WoW.
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_GOTO_SUSPEND CFG_INI_BOOL("gExtWoWgotoSuspend", \
+					     1, \
+					     "Enable Ext WoW goto support")
+/*
+ * <ini>
+ * gExtWowApp1WakeupPinNumber - Set wakeup1 PIN number
+ * @Min: 0
+ * @Max: 255
+ * @Default: 12
+ *
+ * This ini is used to set EXT WOW APP1 wakeup PIN number
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_APP1_WAKE_PIN_NUMBER \
+		CFG_INI_UINT("gExtWowApp1WakeupPinNumber", \
+			     0, 255, 12, \
+			     CFG_VALUE_OR_DEFAULT, \
+			     "Set wakeup1 PIN number")
+/*
+ * <ini>
+ * gExtWowApp2WakeupPinNumber - Set wakeup2 PIN number
+ * @Min: 0
+ * @Max: 255
+ * @Default: 16
+ *
+ * This ini is used to set EXT WOW APP2 wakeup PIN number
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_APP2_WAKE_PIN_NUMBER \
+		CFG_INI_UINT("gExtWowApp2WakeupPinNumber", \
+			     0, 255, 16, \
+			     CFG_VALUE_OR_DEFAULT, \
+			     "Set wakeup2 PIN number")
+/*
+ * <ini>
+ * gExtWoWApp2KAInitPingInterval - Set Keep Alive Init Ping Interval
+ * @Min: 0
+ * @Max: 0xffffffff
+ * @Default: 240
+ *
+ * This ini is used to set Keep Alive Init Ping Interval for EXT WOW
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_KA_INIT_PING_INTERVAL \
+		CFG_INI_UINT("gExtWoWApp2KAInitPingInterval", \
+			     0, 0xffffffff, 240, \
+			     CFG_VALUE_OR_DEFAULT, \
+			     "Set Keep Alive Init Ping Interval")
+/*
+ * <ini>
+ * gExtWoWApp2KAMinPingInterval - Set Keep Alive Minimum Ping Interval
+ * @Min: 0
+ * @Max: 0xffffffff
+ * @Default: 240
+ *
+ * This ini is used to set Keep Alive Minimum Ping Interval for EXT WOW
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_KA_MIN_PING_INTERVAL \
+		CFG_INI_UINT("gExtWoWApp2KAMinPingInterval", \
+			     0, 0xffffffff, 240, \
+			     CFG_VALUE_OR_DEFAULT, \
+			     "Set Keep Alive Minimum Ping Interval")
+/*
+ * <ini>
+ * gExtWoWApp2KAMaxPingInterval - Set Keep Alive Maximum Ping Interval
+ * @Min: 0
+ * @Max: 0xffffffff
+ * @Default: 1280
+ *
+ * This ini is used to set Keep Alive Maximum Ping Interval for EXT WOW
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_KA_MAX_PING_INTERVAL \
+		CFG_INI_UINT("gExtWoWApp2KAMaxPingInterval", \
+			     0, 0xffffffff, 1280, \
+			     CFG_VALUE_OR_DEFAULT, \
+			     "Set Keep Alive Maximum Ping Interval")
+/*
+ * <ini>
+ * gExtWoWApp2KAIncPingInterval - Set Keep Alive increment of Ping Interval
+ * @Min: 0
+ * @Max: 0xffffffff
+ * @Default: 4
+ *
+ * This ini is used to set Keep Alive increment of Ping Interval for EXT WOW
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_KA_INC_PING_INTERVAL \
+		CFG_INI_UINT("gExtWoWApp2KAIncPingInterval", \
+			     0, 0xffffffff, 4, \
+			     CFG_VALUE_OR_DEFAULT, \
+			     "Set Keep Alive increment of Ping Interval")
+/*
+ * <ini>
+ * gExtWoWApp2KAIncPingInterval - Set TCP source port
+ * @Min: 0
+ * @Max: 65535
+ * @Default: 5000
+ *
+ * This ini is used to set TCP source port when EXT WOW is enabled
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_TCP_SRC_PORT \
+		CFG_INI_UINT("gExtWoWApp2KAIncPingInterval", \
+			     0, 65535, 5000, \
+			     CFG_VALUE_OR_DEFAULT, \
+			     "Set TCP source port")
+/*
+ * <ini>
+ * gExtWoWApp2TcpDstPort - Set TCP Destination port
+ * @Min: 0
+ * @Max: 65535
+ * @Default: 5001
+ *
+ * This ini is used to set TCP Destination port when EXT WOW is enabled
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_TCP_DST_PORT \
+		CFG_INI_UINT("gExtWoWApp2TcpDstPort", \
+			     0, 65535, 5001, \
+			     CFG_VALUE_OR_DEFAULT, \
+			     "Set TCP Destination port")
+/*
+ * <ini>
+ * gExtWoWApp2TcpTxTimeout - Set TCP tx timeout
+ * @Min: 0
+ * @Max: 0xffffffff
+ * @Default: 200
+ *
+ * This ini is used to set TCP Tx timeout when EXT WOW is enabled
+ *
+ * Related: None
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_TCP_TX_TIMEOUT \
+		CFG_INI_UINT("gExtWoWApp2TcpTxTimeout", \
+			     0, 0xffffffff, 200, \
+			     CFG_VALUE_OR_DEFAULT, \
+			     "Set TCP tx timeout")
+
+/*
+ * <ini>
+ * gExtWoWApp2TcpRxTimeout - Set TCP rx timeout
+ * @Min: 0
+ * @Max: 0xffffffff
+ * @Default: 200
+ *
+ * This ini is used to set TCP Rx timeout when EXT WOW is enabled
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_EXTWOW_TCP_RX_TIMEOUT \
+		CFG_INI_UINT("gExtWoWApp2TcpRxTimeout", \
+			     0, 0xffffffff, 200, \
+			     CFG_VALUE_OR_DEFAULT, \
+			     "ExtWow App2 tcp rx timeout")
+
+#define CFG_EXTWOW_ALL \
+	CFG(CFG_EXTWOW_GOTO_SUSPEND) \
+	CFG(CFG_EXTWOW_APP1_WAKE_PIN_NUMBER) \
+	CFG(CFG_EXTWOW_APP2_WAKE_PIN_NUMBER) \
+	CFG(CFG_EXTWOW_KA_INIT_PING_INTERVAL) \
+	CFG(CFG_EXTWOW_KA_MIN_PING_INTERVAL) \
+	CFG(CFG_EXTWOW_KA_MAX_PING_INTERVAL) \
+	CFG(CFG_EXTWOW_KA_INC_PING_INTERVAL) \
+	CFG(CFG_EXTWOW_TCP_SRC_PORT) \
+	CFG(CFG_EXTWOW_TCP_DST_PORT) \
+	CFG(CFG_EXTWOW_TCP_TX_TIMEOUT) \
+	CFG(CFG_EXTWOW_TCP_RX_TIMEOUT)
+#else
+#define CFG_EXTWOW_ALL
+#endif /* WLAN_FEATURE_EXTWOW_SUPPORT */
+#endif /* WLAN_PMO_EXTWOW_CFG_H_ */

components/pmo/dispatcher/inc/wlan_pmo_pkt_filter_cfg.h

@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef WLAN_PMO_PACKET_FILTER_CFG_H__
+#define WLAN_PMO_PACKET_FILTER_CFG_H__
+
+#ifdef WLAN_FEATURE_PACKET_FILTERING
+/*
+ * <ini>
+ * g_enable_packet_filter_bitmap - Packet filters configuration
+ * @Min: 0
+ * @Max: 63
+ * @Default: 0
+ *
+ * To enable packet filters when target goes to suspend, clear when resume:
+ * bit-0 : IPv6 multicast
+ * bit-1 : IPv4 multicast
+ * bit-2 : IPv4 broadcast
+ * bit-3 : XID - Exchange station Identification packet, solicits the
+ *         identification of the receiving station
+ * bit-4 : STP - Spanning Tree Protocol, builds logical loop free topology
+ * bit-5 : DTP/LLC/CDP
+ *         DTP - Dynamic Trunking Protocol is used by Cisco switches to
+ *               negotiate whether an interconnection between two switches
+ *               should be put into access or trunk mode
+ *         LLC - Logical link control, used for multiplexing, flow & error
+ *               control
+ *         CDP - Cisco Discovery Protocol packet contains information
+ *               about the cisco devices in the network
+ *
+ * Supported Feature: Packet filtering
+ *
+ * Usage: Internal/External
+ *
+ * </ini>
+ */
+#define CFG_PMO_PKT_FILTER CFG_INI_UINT( \
+	"g_enable_packet_filter_bitmap", \
+	0, 63, 0, \
+	CFG_VALUE_OR_DEFAULT, \
+	"Packet filter bitmap configure")
+
+#define CFG_PACKET_FILTER_ALL \
+	CFG(CFG_PMO_PKT_FILTER)
+#else
+#define CFG_PACKET_FILTER_ALL
+#endif /* WLAN_FEATURE_PACKET_FILTERING */
+#endif /* WLAN_PMO_PACKET_FILTER_CFG_H__ */

components/pmo/dispatcher/inc/wlan_pmo_runtime_pm_cfg.h

@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef WLAN_PMO_RUNTIME_PM_CFG_H__
+#define WLAN_PMO_RUNTIME_PM_CFG_H__
+
+#ifdef FEATURE_RUNTIME_PM
+/*
+ * <ini>
+ * gRuntimePMDelay - Set runtime pm's inactivity timer
+ * @Min: 100
+ * @Max: 10000
+ * @Default: 500
+ *
+ * This ini is used to set runtime pm's inactivity timer value.
+ * the wlan driver will wait for this number of milliseconds of
+ * inactivity before performing a runtime suspend.
+ *
+ * Related: gRuntimePM
+ *
+ * Supported Feature: Power Save
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_RUNTIME_PM_DELAY CFG_INI_UINT( \
+	"gRuntimePMDelay", \
+	100, \
+	10000, \
+	500, \
+	CFG_VALUE_OR_DEFAULT, \
+	"Set runtime pm's inactivity timer")
+
+#define CFG_RUNTIME_PM_ALL \
+	CFG(CFG_PMO_RUNTIME_PM_DELAY)
+#else
+#define CFG_RUNTIME_PM_ALL
+#endif /* FEATURE_RUNTIME_PM */
+#endif /* WLAN_PMO_RUNTIME_PM_CFG_H__ */

components/pmo/dispatcher/inc/wlan_pmo_wow_pulse_cfg.h

@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all
+ * copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE
+ * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef WLAN_PMO_WOW_PULSE_CFG_H__
+#define WLAN_PMO_WOW_PULSE_CFG_H__
+
+#ifdef WLAN_FEATURE_WOW_PULSE
+/*
+ * <ini>
+ * gwow_pulse_support - WOW pulse feature configuration
+ * @Min: 0
+ * @Max: 1
+ * @Default: 0
+ *
+ * When set to 1 WOW pulse feature will be enabled.
+ *
+ * Related: gwow_pulse_pin, gwow_pulse_interval_low, gwow_pulse_interval_high
+ *
+ * Supported Feature: WOW pulse
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_WOW_PULSE_ENABLE CFG_INI_BOOL("gwow_pulse_support", \
+					      0, \
+					      "Enable wow pulse")
+
+/*
+ * <ini>
+ * gwow_pulse_pin - GPIO pin for WOW pulse
+ * @Min: 0
+ * @Max: 254
+ * @Default: 35
+ *
+ * Which PIN to send the Pulse
+ *
+ * Supported Feature: WOW pulse
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_WOW_PULSE_PIN CFG_INI_UINT("gwow_pulse_pin", \
+					   0, 254, 35, \
+					   CFG_VALUE_OR_DEFAULT, \
+					   "Pin for wow pulse")
+
+/*
+ * <ini>
+ * gwow_pulse_interval_low - Pulse interval low
+ * @Min: 160
+ * @Max: 480
+ * @Default: 180
+ *
+ * The interval of low level in the pulse
+ *
+ * Supported Feature: WOW pulse
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_WOW_PULSE_LOW CFG_INI_UINT("gwow_pulse_interval_low", \
+					   160, 480, 180, \
+					   CFG_VALUE_OR_DEFAULT, \
+					   "Interval of low pulse")
+
+/*
+ * <ini>
+ * gwow_pulse_interval_high - Pulse interval high
+ * @Min: 20
+ * @Max: 40
+ * @Default: 20
+ *
+ * The interval of high level in the pulse
+ *
+ * Supported Feature: WOW pulse
+ *
+ * Usage: External
+ *
+ * </ini>
+ */
+#define CFG_PMO_WOW_PULSE_HIGH CFG_INI_UINT("gwow_pulse_interval_high", \
+					    20, 40, 20, \
+					    CFG_VALUE_OR_DEFAULT, \
+					    "Interval of high pulse")
+
+#define CFG_WOW_PULSE_ALL \
+	CFG(CFG_PMO_WOW_PULSE_ENABLE) \
+	CFG(CFG_PMO_WOW_PULSE_PIN) \
+	CFG(CFG_PMO_WOW_PULSE_LOW) \
+	CFG(CFG_PMO_WOW_PULSE_HIGH)
+#else
+#define CFG_WOW_PULSE_ALL
+#endif /* WLAN_FEATURE_WOW_PULSE */
+#endif /* WLAN_PMO_WOW_PULSE_CFG_H__ */