When disconnect/connect from os_if and target_if happen at same time, wpa
supplicant holds CM lock and tries to get MLO lock, while scheduler thread
holds MLO lock and tries to get CM lock, dead lock will happen.
To avoid it, when MLO connect or disconnect, before get CM lock, release
MLO lock, get ref count for each vdev to avoid vdev deleted.
Change-Id: I2007c5b446c67ef142265c6ae0bba87a1980a55c
CRs-Fixed: 3313674
In force teardown case disable the interrupts before
going down. As target may be still active, we may
still continue to receive traffic. Disabling
interrupts to nsure we dont process interrupts while
cleaning up partner SOC
Change-Id: I7092d398c039302234206cb72f7453b6dc0cbcb7
CRs-Fixed: 3332961
Store ini config delay value and current delay value in RTPM
context
Export API to update delay and get current delay in ms for RTPM
timeout.
Export API to restore delay to default value.
Change-Id: I53e9e17d983c2cc6fe317159c8c46d792e56c04e
CRs-Fixed: 3332132
Add a new QCA vendor attribute to configure the periodic sounding for Tx
beamformer functionality.
Change-Id: I2f36f98b6665d448c07d676ff9a5fa907a980c5c
CRs-Fixed: 3328364
Add the stats to indicate the packet drop for EAPOL packets.
This will be useful for the debug of EAPOL packet drop.
CRs-Fixed: 3329895
Change-Id: I5e0abb4e574116a55de124c0012c17154c7c63da
TWT componentization code is converged. Remove WLAN_TWT_CONV_SUPPORTED,
leaving just WLAN_SUPPORT_TWT to enable the feature code.
Change-Id: Ic7f7b1dac43e78b454bab0267dd4a58a56ab2c48
CRs-Fixed: 3285181
Introduce new macros to interface ML SAP capable
host driver with cfg80211.
SAP needs to provide additional information
about the clients when beaconing as ML SAP.
Change-Id: Ie673927d1f8617da38170d41e6aaedae13f4f5c8
CRs-Fixed: 3331264
Normally TID is obtained from MPDU start pkt and is performed
invalid check. There is a chance that DUT receives an
aggregated MPDU with invalid TID, TID value is not updated for
the second MSDU, then it will lead to OOB access.
Change is aimed to perform the check for every MSDU.
Change-Id: Ie261ddbc0e9dcd10459c68d3c78e13faa70286ac
CRs-Fixed: 3333265
The default puncturing input set for any channel is
ALL_SCHANS_PUNC (0xFFFFFFFF) and regulatory considers this as a
valid puncturing pattern. Hence the SP PSD power is set as 0
and the best power mode chosen becomes LPI though AFC is completed
on all SP channels.
Hence validate the input puncture pattern in the regulatory and if
the puncturing pattern is invalid, do not compute SP PSD power values
for the given puncture pattern.
Change-Id: Ib4366eb2de5a0440c649f7beb91f4eca097e82e6
CRs-Fixed: 3331572
Implement ML probe response based on draft 2.1 for MBSSID MLO
Case1: Requesnt for Non-Tx Vap in MBSSID case
If either the Address 1 field or the Address 3 field of the Multi-Link
probe request is set to the MAC address of the AP affiliated with an AP
MLD that corresponds to the nontransmitted BSSID, then the MLD ID
subfield shall not be present in the Probe Request Multi-Link element
of the Multi-Link probe request and the AP MLD is the targeted AP MLD.
The Non-AP MLD will send either a per-STA profile for link specific
request or it can send the ML probe request without link-info in which
case we will respond witll per-STA profile of all the links affilated
with the AP-MLD
Case 2: Request for Tx and Non-TX vap identified by MLDID
If either the Address 1 field or the Address 3 field of the Multi-Link
probe request is set to the MAC address of the responding AP that
operates on the same link where the Multi-Link probe request is sent,
then the AP MLD ID subfield shall be present in the Probe Request
Multi-Link element of the Multi-Link probe request and the targeted AP
MLD is identified by the AP MLD ID subfield.
In this case Non-AP MLD can request of a specific MLD which can be an
MLD of the Tx-vap or it could be MLD of the Non-Tx vap.
Case 3:An AP corresponding to the transmitted BSSID in a multiple BSSID
set shall transmit a Multi-Link probe response in response to a
Multi-Link probe request that is soliciting information of an MLD with
which an AP corresponding to the nontransmitted BSSID in the same
multiple BSSID set is affiliated. Such a Multi-Link probe response
shall carry a Basic Multi-Link element containing information of the
solicited AP MLD and one or more APs affiliated with it. The Basic
Multi-Link element shall be carried in the frame body of the Multi-Link
probe response, whose location is outside of the Multiple BSSID element
carried in the frame. The MLD ID Present subfield of the Presence
Bitmap subfield of the Basic Multi-Link element shall be set to 1.
The MLD ID subfield of the Common Info field of the Basic Multi-Link
element shall be present, and shall be set to the same value as the
BSSID Index subfield of the Multiple-BSSID Index element carried in
the Nontransmitted BSSID Profile subelement of the Multiple BSSID
element, which carries the information of the AP corresponding to the
nontransmitted BSSID
CRs-Fixed: 3306961
Change-Id: I24b2b6a50f57fcc07b060d3e3561246aa44b1b29
Add separate CE host, target, and service map config
tables for Direct Link use case on Kiwi.
Change-Id: I84c1af09da401ab739905b96c85417f907b36743
CRs-Fixed: 3335330
Add debug count for count MPDU received based on preamble type,
reception type, UL/DL and user for max 4 user for MU monitor
mode
Change-Id: I87f1553e1f2f8276501366a825d629cf051d8a80
CRs-Fixed: 3326272
Steps:
1. wpa_supplicant started connect, scheduler thread was connecting vdev0.
2. Wifico disconnect cmd came, found vdev1 not connected, drop cmd for
vdev1.
3. scheduler thread connected vdev0, started to connect vdev1.
4. Wifico started to disconnect vdev0.
5. scheduler thread created bss peer of vdev1, connected vdev1.
6. scheduler thread deleted bss peer of vdev0 as part of disconnect vdev0.
7. F/W assert for deleting assoc peer before link peer.
To fix it, when partner link connect complete, if found assoc link not
connected, trigger mlo disconnect.
Change-Id: I8bb06992c7a0976cdab7a6470180b5faa1f386ab
CRs-Fixed: 3330583
Extract new channel parameter generating including puncture from
wlan_cm_sta_update_bw_puncture as a new API, so that other module
can use the new API.
Change-Id: I20190168c9228fa97e32583bc8db79c98b3b7918
CRs-Fixed: 3326723
Critical update is the explicit signaling for STA to notify
any change in BSS param.
Present support is there for beacon, host notify to FW by
updating current link CU param in wmi_bcn_tmpl_ml_info TLV
of BCN TMPL CMD by setting the corresponding cu_vdev_map
for category 1 / category 2 based on change in critical
update params of ML VDEV.
The same Critical update signaling is extended to 20TU
unsolicited broadcast probe response.
In 6 GHz link host notify the same category 1 / category 2
cu_vdev_map critical update params of ML VDEVs in 20TU
enabled group wmi_prb_tmpl_ml_info TLV of WMI_PRB_TMPL_CMD.
CRs-Fixed: 3314429
Change-Id: I84dbd1901c5a3f2ef28f981c581fd7350d147829
Move the call to reg_save_reg_rules_to_pdev after
reg_init_pdev_mas_chan_list. Since initialization is being called after
saving the reg rules, wlan_regulatory_pdev_priv_obj structure members
are not getting updated.
Since reg_set_ap_pwr_type requires reg rules to be saved in pdev, call
this API after saving the reg rules to pdev.
Change-Id: I24e98edec45114ad76490d4e3776edaa0fce66e2
CRs-Fixed: 3327492
Add a new enum for WBM2SW_RELEASE ring used
specifically for handling tx completions from
ppe2tcl ring in DS
Change-Id: I88f033e87f2a40e6f730728da3168b18b5e39f5c
CRs-Fixed: 3303259
In case of fast_recycled is set we can avoid invalidating
the complete buffer as it would have been invalidated
by tx driver before giving to recycler.
But we need to still invalidate rx_pkt_tlv_size as this
area will not be invalidated in TX path
Change-Id: I9e5202d8b251a5d59117609a705a311e499d05b0
CRs-Fixed: 3332713
Currently, value of domain ETSI18_WORLD is 0x3D which is not
correct.
Fix is to map ETSI18_WORLD to correct hex value to avoid any
issue.
Change-Id: I064896a089fd512bc350ff4401c03822dd78fa96
CRs-Fixed: 3331649
The MSI address and data information for Direct Link
copy engines will be available once the WiFi driver
on LPASS is initialized. Add support to configure the
IPCC address and data values into Direct Link copy
engines at runtime.
Change-Id: I5e7dff90c2f1ff764462c235deb5795ed019a16b
CRs-Fixed: 3316679
Add support and ops for initialization and
deinitialization of Direct Link refill ring.
Change-Id: I2c7018c4f8411fb7a590cfbb8b991f9152b22397
CRs-Fixed: 3316656
Some platform would like to disable wake IRQ, so add INI to disable
wake IRQ.
Wake IRQ can't share the same IRQ with the copy engines. In one MSI
mode, we don't know whether wake IRQ is triggered or not in wake IRQ
handler. known issue CR 2055359.
Disable wake IRQ for one MSI mode. If you want to support wake IRQ.
Please allocate at least 2 MSI vector. The first is for wake IRQ while
the others share the second vector.
Change-Id: Id9e54e287f146ff64d94669bbc44dc0a724d9480
CRs-Fixed: 3290867
MSI vector number is defined in platform driver, so use platform
driver API to check whether it is in one MSI mode or not.
In case of one MSI vector, interrupt migration needs to be disabled.
This is because when interrupt migration happens, the MSI data may
change. However, MSI data is already programmed to rings during initial
phase and there is no way to know that MSI data is changed during run
time and reprogram again.
If it is in one MSI mode, disable interrupt migration by adding IRQ
flag IRQF_NOBALANCING.
Change-Id: I54579dfe1e658c1a2c395be93875d013d6e6affd
CRs-Fixed: 3290829
Current code directly passes the result of wlan_vdev_get_psoc(vdev) to
wlan_objmgr_get_peer_by_mac, without null pointer checking, which can
result in null pointer dereferencing.
To fix this issue, add checking of the psoc pointer before passing to
wlan_objmgr_get_peer_by_mac.
Change-Id: Ica5ebbc448a6da8b1e7c846f05773d95f995eaca
CRs-Fixed: 3327337
80+80 MHz support HE capability as well. To make it generic,
change the function name from dfs_is_precac_done_on_ht8080_chan
to dfs_is_precac_done_on_80p80_chan.
The function dfs_is_precac_done_on_ht20_40_80_160_165_chan_for_freq
checks for 320 MHz channel width also. To make it generic, this function
has been renamed as dfs_is_precac_done_on_non_80p80_chan_for_freq.
Change-Id: I942e27b85f4f9e2ccc1786072b044deb0b4a6e45
CRs-Fixed: 3317795
Add new enum WIFI_POWER_EVENT_WAKELOCK_DYN_MAC_ADDR_UPDATE
for dynamic MAC address update wake lock reason code.
Change-Id: I61b9b54b2aca30eec9aa1d153a40877bfda88af9
CRs-Fixed: 3327592
Currently, only single pd_threshold is fetched and
treated as SRG and NON-SRG pd threshold instead of
handling both threshold separately.
Fix is to get SRG and NON-SRG pd threshold from
userspace instead of single pd threshold.
Change-Id: I414843dfd08068c81531d0e96d71fb68d8bfccd1
CRs-Fixed: 3328201
Add MAC ID to which the Spatial Reuse stats is requested from.
Pass this MAC ID to FW to get the respective Spatial Reuse stats.
Change-Id: Ief2434bf1f2fc82d9339ee38933effbd580088af
CRs-Fixed: 3328686
FISA update may come when target in suspend state, then
UMAC force wake may return failure and lead to system timeout
crash. Change is used to defer the update when resume happens.
Change-Id: If033bed692dccf2d27e9c76825ab2063a3f56841
CRs-Fixed: 3324926
Add "validate_set_mlo_link_cb" callback to mlo link set serialization
request context. Mlo mgr component client can register such callback to
be invoked before set mlo link command to target.
Change-Id: I0e860186dd33fc45b3f662d6af91329f10e4c638
CRs-Fixed: 3324888
A new capability bit from FW is introduced that provides
ADFS 320 MHz support information. supports_adfs_320 signifies
chainmask capability service bit if FW supports ADFS on 320 MHz
channel width. Add this capability bit(supports_adfs_320) in host.
Change-Id: I09c689658ef495d8a8707425ecc9ba922fce4d41
CRs-Fixed: 3317795
Reduce CE0 source and destination ring sizes for XPAN
usecases to reduce memory footprint based on the
frequency of transactions between LPASS and FW.
Change-Id: I65076a2720fa72d10327981994763dc4ac295ab3
CRs-Fixed: 3319659
Add reg txops to fetch min_psd for punctured SP channels.
min_psd is computed from afc response. Using the min_psd power value,
EIRP is computed for the non-punctured BW using the formula
EIRP = PSD + 10 * log10(non-punctured BW).
Add an entry in bw_to_10log10_map for all possible non-punctured
bandwidth.
CRs-Fixed: 3329625
Change-Id: I79707cb233640342c521e41e9c4d776e121c1d6d
Currently vdev id is passed from nbuf cb
but vdev_id is not being updated in nbuf cb
which is resulting in passing wrong vdev id to the
packet logging function.
So to fix issue pass vdev id from tx descriptor instead
of nbuf cb and also rate limit the error log in vdev NULL
case.
Change-Id: I69f568b7da52f1c96f208a220c6c4a7f6d98e082
CRs-Fixed: 3327359
320 MHz bw are overlapped, if you want special 320 MHz center freq,
pass center freq of 320 MHz to reg_set_channel_params_for_pwrmode
through ch_params->mhz_freq_seg1.
Change-Id: If5947ed1303c5c7d978161b6ffc6490ab07b8296
CRs-Fixed: 3326837
Currently the mdpu_desc_info from the msdu buffer tlvs,
for 2K-jump or OOR errors, if its the first-msdu-in-mpdu.
But if this flag is incorrectly indicated, there is a chance
of decoding garbage data and accessing invalid/NULL memory area.
In order to mitigate the above mentioned issue, add a sanity
check to determine if the first-msdu-in-mpdu has been processed
once and process/drop subsequent msdus based on this flag. This
flag also helps in handling cases, where first-msdu-in-mpdu
is indicated incorrectly for multiple msdus in an mpdu.
Change-Id: I990301d5a101dc7aa71303420bf49ab6fcee27c6
CRs-Fixed: 3325334
Currently sme_switch_channel set new_ch_width as phy_ch_width, while
wma_csa_offload_handler set new_ch_width as raw bit in wide bandwidth
channel switch IE.
Clean up the code. Define new_ch_width in csa_offload_params as
phy_ch_width.
Change-Id: Ie1999860421aa60c18cdc8059275954d910b4b66
CRs-Fixed: 3324746
Ideally in MLO, Rx buffers should be routed to error
rings of the SOC which owns the RX buffer or link desc
incase of any error or fragment
But in case of HW issue if the packets are routed to
partner soc. Handle gracefully instead of assert
Change-Id: Ia56188808dfd034e960e1c1345de8f760e4b05f1
CRs-Fixed: 3327959
In case of MLD, if one of the partner vdev is not brought up and
CSA is triggered on self pdev with multiple vdevs configured then
all the vdevs of this pdev will move to restart state.
But the ML AP vdev in MLO_SYNC_WAIT will not handle CSA restart
leading to multivdev restart request timeout.
Add change to handle CSA_RESTART when the ML AP vdev is in MLO_SYNC_WAIT
state. Thereby all vdevs of this pdev will move to restart state.
Change-Id: I9b729e2f81d3c72ab5e321f3a396f157424c1663
CRs-Fixed: 3328931
Add support for new vendor sub-command attributes for 320 MHz
channel width and puncturing information as part of the
external ACS.
Change-Id: Ic8181619949061794775bfe55f4afd0f408a7316
CRs-Fixed: 3323216
